 | Bargain Basement
Closeout items, sale items, discontinued items, as-is, used parts, and more.
|
 |
 Used Pin Balls: 25¢ each  Dozens available
Used pin balls! Still lots of life left in these. Great replacements for badly worn, badly pitted, or rusted balls, or for use in a game you may just be selling and passing-on as-is. Also ideal for hobbiests who like to polish and rejuvenate old balls to new condition with a tumbler.
Balls are in average used condition. No rust or major damage. Most will show some signs of average previous use. Additional shipping costs may apply to larger quantities, due to weight.
Looking for new balls? See our General Parts & Supplies page.
|
 |
Used Pac-Man / Ms. Pac-Man Joystick Assy.: $10.00 1 Unit Available
Used original joystick assembly from Pac-Man or Ms. Pac-Man game. Complete- no parts missing- fully functional. A bit dirty/dusty from use and shows some signs of past use and wear/tear, but still in full working order.
Compare to new modern replacements at $40 or more!
|
 |
Pinball / Amusement Game Security Bar/Hasp: $12.50 1 Unit Available
Used coin door security bar and hasp. Complete with mounting bolts and nuts, and in great working and cosmetic condition. A bit dusty/dirty from past use, but fully functional.
Great investment for any game operated commercially (on-location) and adds a valuable level of security to your earnings!
Can be used on most all pinball, arcade video, and other coin-op games that use standard width coin door.
Compare to brand new units at $40 or more!
|
Sample Part
Click to Enlarge Image |
Twilight Zone Clock PC Board Sets- Used, As-Is: $15.00 each 5 Units Available
Original Bally clock PC board sets for Twilight Zone pinball. These units are in varying conditions- all assumed not working to some extent. Great sources for spare parts (especially the hard-to-find "tall" optos) or to repair and use as a replacement/spare board. Most have had previous repair work done here and there, and show signs of use. Inquire before purchasing if you have any specific questions. Sold as-is, no warranty, sale is final.
|
Sample Part
Click to Enlarge Image |
Twilight Zone Clock Housings- Used, As-Is: $15.00 each 3 Units Available
Original Bally clock housings for Twilight Zone pinball. In good used reusable condition with no apparent damage. Housings are original and have been modified with ventilation holes drilled in top and/or sides to reduce heat buildup inside. May be dirty/dusty and will show some signs of use. Inquire before purchasing if you have any specific questions. Sold as-is, no warranty, sale is final.
|
Click to Enlarge |
Bally/Williams Pop Bumper Body, Used: 50¢ ea Compare to new at $2.00 each! 11 Units Available
Original Bally/Williams plastic pop bumper body, used, good condition. Replaces Bally/Williams part # 03-7443-5 and Data East/Sega/Stern # 545-5197-00.
Inexpensive alternative to new modern replacement at 1/4 the price!
|
Click to Enlarge |
Pop Bumper Base, Used: 25¢ ea Compare to new at $1.00 each! 10 Units Available
Original plastic pop bumper base, used, good condition. Replaces Bally/Williams part # 03-6009-A5 and Gottlieb # B-10432. Can be used on nearly all makes/models.
Inexpensive alternative to new modern replacement at 1/4 the price!.
|
Click to Enlarge |
Pop Bumper Skirts, Used: 75¢ ea
Used pop bumper skirts- all makes/models. Variety of colors. Used and dirty/dusty but will clean up well for excellent and inexpensive replacement on any game.
Inexpensive alternative to new replacement part at 1/4 the price!
|
| Color: |
# Available: |
Order: |
| White | 1 | Add to Cart |
| Red | 14 | Add to Cart |
| Yellow | 5 | Add to Cart |
|
|
Click to Enlarge |
Pop Bumper Cap, Yellow, Used: $1.00 Compare to new at $4.00 each! 1 Unit Available
Original yellow plastic pop bumper cap for Bally/Williams games. Used, good condition. Some tiny stress cracks around screw holes. Replaces Bally/Williams part # 03-8254-16.
Inexpensive alternative to new modern replacement at 1/4 the price!.
|
Click to Enlarge |
Pop Bumper Ring/Rod Assy, Used: $4.95 ea Compare to new at $9.95 each! 11 Units Available
Original pop bumper ring/rod assembly, used, good condition. Fits most makes and models that use standard type pop bumper ring and parts, including Bally, Williams, Gottlieb, Data East, Sega, Stern, and more. Direct replacement for Bally/Williams part # A-4754.
Inexpensive alternative to new replacement part at half the price!
|
 |
Data East / Sega / Stern / Capcom Drop Targets, Used: 99¢ ea. Compare to new at $3.05 each! 3 Units Available
Original used thin-top drop targets for use on Data East, Sega, new Stern, and Capcom pinball games. A bit dirty from use, but in good useable condition.
Inexpensive alternative to new replacement part at less than 1/3 the price!
Decal/artwork may vary from piece to piece, or may not be included. Contact us if you have any questions before purchasing.
|
Click to Enlarge |
10 Piece Drill/Socket Driver Bit Set- New: $3.00 ea 1 Unit Available
10 piece drill bit and screw bit set for drill or socket driver. Includes 1 Torx bit, size T-15, 1 square-head bit, 1 short #2 phillips bit, 1 short flatblade bit, 1 long #2 phillips bit, 1 long flatblade bit, 1 magnetic bit holder, 1 1/16" drill bit, 1 1/8" drill bit, 1 5/32" drill bit, and plastic holder.
Ideal for any pinball repair work!
|
Click to Enlarge |
10 Piece Driver Bit Set- New: $2.00 ea 1 Unit Available
10 piece screw bit set for drill or socket driver. Includes 1 #1 phillips bit, 1 #2 phillips bit, 1 #3 phillips bit, 1 Torx bit size T-10, 1 Torx bit size T-15, 1 Torx bit size T-20, 1 small square-head bit, 1 large square-head bit, 1 small flatblade bit, 1 large flatblade bit, and plastic holder with belt or pocket clip.
Ideal for any pinball repair work!
|
Click to Enlarge |
Pinball Leg Bolt Plate, Used: $1.00 ea 4 Units Available
Used leg bolt plates. Will fit most makes/models. Used condition with good bolt threads. May be dirty/dusty with some surface rust, but can be used "plug and play" or cleaned/painted for new look.
Inexpensive alternative to new replacement part at 1/5 the price!
|
Click to Enlarge |
Addams Family Bookcase Base, Used: $3.00 1 Unit Available
Used bookcase base for Addams Family pinball, part # 03-8623. Good condition with no breaks. Shows some signs of use and dirt/dust buildup but would make a great replacement or spare for this valuable game.
Inexpensive alternative to new replacement part at 1/3 the price!
|
Click to Enlarge |
Ball Shooter Rod/Knob- All Metal- Used: $3.00 1 Unit Available
Used ball shooter- can be used on most makes/models. Early Williams style with metal shaft and knob. Used, good condition.
Inexpensive alternative to new replacement part at 1/3 the price!
|
 |
Used Coils / Solenoids: $5.00 ea & up
We've just listed dozens of used/working coils on our Electronic Parts page at great prices. Many discontinued and hard-to-find coils available. Looking for an inexpensive replacement or a unique coil that's no longer being made? We may have it! Click here for more details and full listing.
|
Click to Enlarge |
MEI 2400 Series Bill Validator/Upstacker: $439.95 SALE: $299.00 Only ONE unit left.
Brand new bill validator/upstacker unit made by MEI- model # AE2451-U5. This unit can be used in most any arcade video, redemption, pinball, or other game that has a coin door that accepts an upstacker bill acceptor unit, and corresponding 9-pin wiring harness connector built into the game to hook it up. It mounts on either the existing four mounting studs located on the inside of the game's front door, or on the mounting bracket provided in various mounting kits.
Features:
- $1, $2, and $5 US bill acceptance
- Four Direction bill acceptance (forward, backward, upside-down, right-side-up)
- Re-programmable Flash Memory (Flashport™), allowing the unit's software to be updated in the field by flash downloading.
- Coupon configuration
- Lighted bezel
- Easy access to the bill path even while mounted
- Diagnostic LED
- Enhanced and adjustable security
- Factory-set to four pulses per dollar. Can be adjusted to 1 pulse per dollar.
- Holds up to 500 individual bills in its storage compartment.
- 115vac model
Comes complete with attached plug-in wiring harness, ground wire, operation/instruction manual, and extra stickers for the front panel for various bills that you want it to accept.
|
 |
German (Deutchmark) Coin Mechanisms: $7.50 ea
German (Deutchmark) coin mechanisms in various common denominations. Used, fully working, excellent condition.
 | SHIPPING: Heavier item- may require additional shipping cost, depending on quantity and destination. E-mail us if you need a shipping quote. |
|
| Coin: |
Qty. Available: |
Order: |
| 1 DM | 1 | |
| 2 DM | 1 | |
| 5 DM | 1 | |
|
|
 |
Black Vinyl Electrical Tape: 50¢ ea 1 unit available
3/4-inch width, 60 feet long. A must for spot repairs in your game or any kind of electrical repair work around the house, auto, etc. Brand new, in factory wrapping.
|
Click for large view. |
Bally/Williams WPC-95 Factory Security Bar: $9.95 1 unit available
Original factory security bar as used on Bally and Williams pinballs from approx. 1995-up. This bar mounts in the two brackets on either side of the coin door on these games. The brackets are usually still in place on most games, but this bar typically gets lost and is missing from most games. Here's a chance to make your game complete!
| SHIPPING: Heavier item- may require additional shipping cost, depending on destination. E-mail us if you need a shipping quote. |
|
 |
Used Pinball Leg Bolts: 25¢ ea - SOLD OUT -
Miscellaneous used leg bolts. Great for spot repairs, for a fixxer-upper you are getting rid of, or just to have some spares on hand! All used leg bolts have 5/8" acorn head, with good, useable threads- no stripped bolts. Most are steel but some black and brass may occasionally be mixed in. No mixing-matching or requests for specific length or type.
| SHIPPING: Heavier item- may require additional shipping cost, depending on destination. E-mail us if you need a shipping quote. |
|
Click to enlarge |
Gottlieb/Premier Pinball Auxillary Power Supply Board: $5.00 ea 2 units available.
Possibly from a Gottlieb "Victory" pinball. Auxillary power supply unit. Appears clean, complete. Sold as-is, untested.
|
 |
Set of three (3) "Kiss Me" Gottlieb Bumper Caps: $5.00/set
Set of three (3) bumper caps for a Gottlieb/Premier Bad Girls pinball game. White background with red printing "Kiss Me". Good condition, no broken mounting tabs. Sold as a set (3pcs).
|
Click to enlarge |
Stern Video Game Power Supply Board: $5.00 - SOLD -
Power supply unit from a Stern Super Cobra cocktail video game. Unit was working when removed from game. One capacitor is now loose and one resistor appears to have some heat/burns. Also some connectors show some scorching from heat. Sold as-is, untested.
|
Click to Enlarge |
Lethal Weapon 3 Yellow 4-Bank Standup Target Assy: $9.95 - SOLD -
Original 4-bank standup target assembly from Data East Lethal Weapon 3 pinball. Targets are complete and in working condition- can be installed and used "plug and play". Two of the targets have some cracks/chips on the corner edges. The other 2 are intact. All show some minor stress cracks around the rivet in the center, from age.
These yellow square 3D targets are used on several Data East games of this era, including Lethal Weapon 3 and Star Wars and are no longer being made so can be very hard to find.
|
 |
Imonex© Coin Mechanisms for Tokens- Used: $5.00 ea - SOLD OUT -
Used Imonex© brand coin mechanisms, modified for use with 0.900-inch game tokens. Imonex mechs are some of the most high-tech mechs made, featuring very few moving parts and consequently are very low-maintenance. These normally retail brand new for around $30 each, so here's your chance to save a bunch! These mechs have been permanently modified to use any standard 0.900" gaming tokens, and will not work with regular U.S. quarters. Great for any game in your home or commercial location that you prefer to operate with tokens. Each mech has two mounting studs on the left side (no studs on the right). Will fit in most all makes and models of pinball, video, and other games.
|
Bargain Basement
