Quick Links:
- Home Page
- Game Parts & Supplies
- Game Service & Repair
- Pinball Machines for Sale
- Video Games for Sale
- Ordering Info
- Contact Us
|
Information on this page is subject to change without notice, and may not necessarily be current. All prices are in US Funds.
 | | Pinball: Electronic Parts Rebuild kits, score displays, chips, transistors, capacitors, switches, connectors, cords, plugs, and much more...
|
IMPORTANT NOTES AND DISCLAIMERS: The notes, disclaimers, and terms below apply to purchase and use of any parts listed on this page.
- RETURNS: There are NO RETURNS on electrical/electronic parts- all sales are final. Please consider and make your choice wisely before purchasing- or contact us if you have any questions.
- DOING YOUR OWN REPAIR WORK: The removal and replacement/installation of electronic components at the circuit board level is NOT recommended if you are not experienced with electronic component and circuit board repair. If you are new to this stuff, please take our advice and leave the work to a qualified expert- you will most likely thank yourself later. It is VERY easy to cause damage to parts, circuit boards, and your game in general, if repairs are not done with precision, neatness, and accuracy. It is very easy for one to make problems WORSE than they were before, if one does not know what one is doing, or does not have adequate experience with these kinds of parts and this kind of work in general.
- CONDITION OF NEW PARTS: Please check/test/verify new parts for proper operation before installing in your game. Perfection is not a guarantee- some brand new parts occasionally come defective right from the manufacturer. To avoid damage to you, your location, or your game, it always pays to quickly test any new part before installation. We (Action Pinball & Amusement, LLC) are not responsible for any damage caused by new faulty parts that may be installed in your game. Purchase of any parts through our website indicates your acceptance of this disclaimer. Contact us if you receive a part that appears defective. Any "defective" parts returned must be unused and uninstalled, or return/exchange will not be honored.
- TESTING AND REPAIR HELP: If you are unsure about testing a component, or don't know how to properly test, please enlist the help of a professional. We (Action Pinball) do not provide technical repair help or assistance by phone or e-mail- we simply provide parts for sale to you through our website. It is up to you to handle the actual repair/installation of parts and your game in general. Please consult with your local pinball repair person or electronic repair shop if you require assistance or have any questions on repair work or testing.
WE ARE NOT RESPONSIBLE FOR ANY DAMAGE TO YOU, YOUR GAME, OR YOUR PARTS. ALL PARTS WE SELL ARE SOLD UNDER THESE TERMS.
For other items not listed here, see our General Parts & Supplies page.
|
Electronic Rebuild Kits:
Get all the parts you need in one handy kit!
| Score Display Power Supply Rebuild Kit - Williams (1977-1988) Part #: KIT_WMS_HV1 Condition: New
Rebuild the score display high-voltage power supply circuitry in your Williams solid-state pinball game with this handy kit.... more
More Info | Related Items | Order
|
$36.38 each
Order
|
| Score Display Power Supply Rebuild Kit - Bally/Williams (1988-1991) Part #: KIT_WMS_HV2 Condition: New
Rebuild the score display high-voltage power supply circuitry in your Williams solid-state pinball game with this handy kit.... more
More Info | Related Items | Order
|
$22.92 each
Order
|
 Sample Actual contents may vary |
Data East Score Display Hi-Voltage Rebuild Kits:
Rebuild the score display high-voltage power supply circuitry in your Data East (or early Sega) pinball game with one of these handy kits. Common failures of old components in the high-voltage circuitry on the power supply board are typically to blame for blown fuses and dead displays in these classic games. And when one part fails, it typically takes several others with it, so most components usually have to be replaced when doing a repair. Swap them all out at the same time and have fresh, new, healthy parts in your game!
These multiple-piece kits include (unless otherwise noted in table at right) all of the hard-to-find resistors, diodes, zener diodes, capacitors, and unique high-voltage transistors to replace all original components in the high-voltage section on your original Data East power supply board.
Directions are included. Requires moderate-to-expert skills with electronics and circuit board work, component handling, ability to ID components and correct pinout of components, circuit board soldering/desoldering, and necessary tools/equipment.
NOTE: Batman Forever, Baywatch, Frankenstein, Maverick do not use high voltage on their power supply board (# 520-5047-03), so no kit is listed or provided for these games. Display power is contained on the display unit itself in these games (display is our part # DMD002).
|
|
Power Supply #: |
Kit Part #: |
Price: |
Order: |
Notes: |
520-5000-00
Used in games in list "A" below
| KIT_DE_HV1
| $36.49 | Order
| See Game List
|
520-5047-00
Used in games in list "B" below
| KIT_DE_HV2
| $28.29 | Order
| See Game List
|
520-5047-01
Used in games in list "C" below
| KIT_DE_HV3
| $34.19 | Order
| See Game List
|
520-5047-02
Used in games in list "D" below
| KIT_DE_HV4
| $34.69 | Order
| See Game List
|
IMPORTANT NOTE: Order kits above based on the number printed on your power supply board - NOT the game name. The power supply in your game may not be the original one and may have come from a newer or older game (not uncommon to see in most 20+ year-old used games). You can find the power supply number printed on your board in the lower right corner of the board, when viewed as mounted in the game.
Game Lists:
A: Back to the Future, Laser War, Monday Night Football, Phantom of the Opera, Playboy 35th Anniversary, Robocop, Secret Service, Simpsons, Time Machine, Torpedo Alley
B: Batman, Checkpoint, Hook, Star Trek, Teenage Mutant Ninja Turtles
C: Lethal Weapon 3, Rocky & Bullwinkle, Star Wars
D: Guns 'n Roses, Jurassic Park, Last Action Hero, Tales From the Crypt, Tommy, WWF Royal Rumble
|
|
|
| Bally / Stern Power Supply Rebuild Kit Part #: KITBLYPS Condition: New
For use on most early Bally and Stern electronic solid-state (SS) pinball games with original power supply boards. (Not all... more
More Info | Related Items | Order
|
$29.97 each
(2 Available)
Order
|
| Bally / Stern Score Display Repair Kit Part #: KITBLYDIS Condition: New
This repair kit is for use in early Bally or Stern electronic solid-state (SS) pinball games from approx. 1977-1985 which have... more
More Info | Related Items | Order
|
$10.50 each
Order
|
Pinball ROM Chips:
 |
Pinball ROM Chips: $10.00 and up
Get the latest software for your game! We have and can make ROM chips and ROM updates for most Bally, Williams, Stern, Data East, and Sega pinballs. Some Game Plan, Gottlieb, and others, too!
See our Rom Chips Page for a listing of the latest software for most games, and ordering information!
Looking for blank EPROM chips? See our EPROM Chips section below.
|
ICs / Chips:
 |
IC TECH TIP:
ICs, or "chips" are static-sensitive devices and should be handled with care. A rogue static discharge onto an IC can destroy it. Use necessary handling precautions when dealing with ICs- we recommend an appropriate static wrist-strap or static work-station to help avoid destructive static discharge that can destroy delicate chips.
ICs must be installed correctly, and in the proper orientation on the board, otherwise they can self-destruct or damage other components on your board. ICs have a small semi-circular indent on the top of the IC on one end of it. This is the end with "pin 1" on the IC, and must match the indent on the chip socket or printing on the board, when being installed.
We recommend the installation of a chip socket if the chip you are replacing was not originally socketed on the board- this makes future troubleshooting/replacement much quicker and easier, and eliminates unnecessary trauma to the delicate pads and traces on the board.
All electronic repair components we sell are sold with the assumption that you "know what you're doing". We are not responsible for any damage resulting from improper handling/installation. If you are uncomfortable replacing components or have any doubts/questions, we recommend enlisting the help of a professional. See our Game Service & Repair page for information on finding help in your area.
|
Chips below are listed numerically, from lower numbers to higher numbers. To find a part quickly, use your browser's 'search' feature (CTRL+F) to search this page for full or partial chip number. Click here for chip sockets.
| LM339 Opto Comparator IC Part #: LM339 Condition: New
Commonly used for opto switches and in many late-model games to translate the opto signal into a switch signal. Used on MPU... more
More Info | Related Items | Order
|
$1.44 each
(3 Available)
Order
|
| 555 Timer IC Part #: 555 Condition: New
As used in blanking circuits in Williams solid-state games, and zero-crossing detector circuits in Bally/Stern solid-state... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 556 Dual Timer IC Part #: 556 Condition: New
Dual-timer IC as used on Williams L3-L6 MPU boards for the important 'blanking' signal generation that controls on/off states... more
More Info | Related Items | Order
|
$1.18 each
Order
|
| 55536 CVSD Chip Part #: 55536 Condition: New
Chip used on sound boards in some Bally/Williams games. 14-pin CVSD (continuously variable slope delta-modulator) IC. Replaces... more
More Info | Related Items | Order
|
$19.00 each
(4 Available)
Order
|
| Dallas DS1210 RAM Controller IC Part #: DS1210 Condition: New
Nonvolatile RAM controller IC used on Gottlieb System 3 CPU boards as a memory-protect / battery monitor chip. Monitors battery... more
More Info | Related Items | Order
|
$6.99 each
Order
|
| LM1875T Amplifier IC Part #: LM1875T Condition: New
LM1875T is the replacement amplifier as used in many later-model Bally/Williams pinball games that feature computer-controlled... more
More Info | Related Items | Order
|
$5.99 each
Order
|
| TDA2002 Amplifier IC Part #: TDA2002 Condition: New
Audio power amplifier IC used on many makes/models of older electronic solid-state (SS) pinball and video games. 5-pin, TO-220... more
More Info | Related Items | Order
|
$3.99 each
Order
|
| TDA2003A Amplifier IC Part #: TDA2003A Condition: New
Audio power amplifier IC used on many makes/models of older electronic solid-state (SS) pinball and video games. 5-pin, TO-220... more
More Info | Related Items
|
$3.99 each
Currently Unavailable more info...
|
| Star Trek (Data East) Lamp Driver IC Part #: ULN2003A Condition: New
Chase lamp driver IC used on Data East Star Trek pinball to run the blinking lights in the tubes on either side of the... more
More Info | Related Items | Order
|
$3.49 each
Order
|
| 2064 SRAM Chip Part #: 2064 Condition: New
DISCONTINUED - use 6264 SRAM as replacement.
More Info | Related Items
|
Discontinued more info...
|
| 2114 RAM Chip Part #: 2114 Condition: New
Static RAM IC used on Williams Level 7 MPU boards (2 chips used per board- IC13 and IC16). 18 pin chip, 5v, 1K x 4 memory,... more
More Info | Related Items | Order
|
$3.95 each
Order
|
| ULN2803A Driver IC Part #: ULN2803A Condition: New
Used in all Bally/Williams WPC-89, WPC-S, WPC-95, and Pinball 2000 pinballs (1990-1999). Common failure part on the MPU board... more
More Info | Related Items | Order
|
$1.87 each
(9 Available)
Order
|
| CA3081 Pre-Driver Transistor Array IC (Bally / Stern) Part #: 3081 Condition: New
Transistor array IC housing 7 individual transistor circuits. As used on early Bally and Stern electronic solid-state (SS)... more
More Info | Related Items | Order
|
$3.95 each
Order
|
| LM3900N Amplifier IC Part #: LM3900 Condition: New
Operational quad amplifier IC as used on older Bally and Gottlieb solid-state sound boards, and more. Common failure part due... more
More Info | Related Items | Order
|
$3.84 each
Order
|
| 4011 / 14011 Quad 2-input NAND Gate IC Part #: 4011 Condition: New
Quad 2-input NAND gate IC for use in many older solid-state pinball games for switch and display digit driver circuits.... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| CD4020BE 14-Bit Ripple-Carry Counter IC Part #: CD4020BE Condition: New
14-bit ripple-carry counter IC.
Use with 16-pin chip socket.
All sales are... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 4040 / TC4040BP 12 Stage Binary Counter/Divider Part #: 4040 Condition: New
12 stage binary counter/divider IC. As used in many display driver circuit applications and more.
Use with ... more
More Info | Related Items | Order
|
$1.64 each
Order
|
| 4042 / CD4042BCN Quad Clocked D Latch IC Part #: 4042 Condition: New
Quad clocked D latch IC. As used in many display driver circuit applications and more.
Use with ... more
More Info | Related Items | Order
|
$1.72 each
Order
|
| 4049 / 14049 Hex Inverting Buffer IC (Switch Matrix & Display Driver) Part #: 4049 Condition: New
As used in switch matrix and display segment/digit driver circuits in many Williams solid-state games (1977-up) and others.... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 4050 / 14050B Hex Inverting Buffer IC (Switch Matrix & Display Driver) Part #: 4050 Condition: New
Hex buffer/converter (non-inverting) as used in switch matrix and display driver circuitry in older Williams solid-state and... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 4069 / GD4069UB Logic Hex Inverter IC Part #: 4069 Condition: New
Logic hex inverter IC. As used in many display driver circuit applications, more. Replaces MC14069 and similar... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 4071 / MC14071 Quad 2-Input OR Logic Gate IC Part #: 4071 Condition: New
OR Logic Gate as used in many solid-state pinball applications. Replaces original number 14071, MC14071, and Bally/Williams #... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 4502B Hex Inverter/Buffer IC Part #: 4502B Condition: New
Hex inverter/buffer IC.
Use with 16-pin chip socket.
All sales are final on... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 4543B 7-Segment Decoder IC Part #: 4543B Condition: New
Ships as CD4543B. 7-segment decoder IC used primarily in Bally and Stern 6- and 7-digit score display units. Replaces Bally... more
More Info | Related Items | Order
|
$1.52 each
Order
|
| 5101 CMOS RAM IC Part #: 5101 Condition: New
5101 CMOS RAM chip as used on older games including Bally, Stern, Williams solid-state. 22 pin chip. Replaces Williams #... more
More Info | Related Items | Order
|
$7.95 each
Order
|
| 6116 CMOS RAM IC Part #: 6116 Condition: New
2k x 8 static RAM (CMOS RAM) chip as used on older games including Bally and Williams solid-state games, mid-to-late 1980s.... more
More Info | Related Items | Order
|
$10.00 each
Order
|
| UDN6118A Display Driver IC Part #: UDN6118A Condition: New
Display digit driver IC used on many brands of solid-state pinball games in the 1980s and early 1990s. 18 pin chip. Replaces... more
More Info | Related Items | Order
|
$8.95 each
Order
|
| UDN6184A Display Driver IC Part #: UDN6184A Condition: New
Display digit driver IC as used on some displays in early electronic solid-state (SS) pinball games. 18 pin chip. Replaces... more
More Info | Related Items | Order
|
$10.00 each
Order
|
| 6264 SRAM Chip Part #: 6264 Condition: New
8k x 8 static RAM (SRAM) chip, 28-pins, DIP, 70ns access time. Used on many later-model makes and models for static RAM memory.... more
More Info | Related Items | Order
|
$9.95 each
(10 Available)
Order
|
| 6800 Microprocessor Chip Part #: 6800 Condition: New
6800 central processing unit (CPU) chip, as used on most vintage Bally and Stern electronic solid-state (SS) games. 40 pin chip... more
More Info | Related Items | Order
|
$9.05 each
Order
|
| 6802 Microprocessor Chip Part #: 6802 Condition: New
6802 central processing unit (CPU) chip, as used on most vintage Williams electronic solid-state (SS) pinball games. 40 pin... more
More Info | Related Items | Order
|
$19.95 each
Order
|
| 6803 Microprocessor Chip Part #: 6803 Condition: New
6803 central processing unit (CPU) chip. Used in Bally/Midway electronic solid-state (SS) pinball games produced between 1985... more
More Info | Related Items | Order
|
$13.95 each
Order
|
| 6808 Microprocessor Chip Part #: 6808 Condition: New
6808 central processing unit (CPU) chip, as used on many vintage solid-state pinball games including Williams System 9 games... more
More Info | Related Items | Order
|
$13.95 each
(2 Available)
Order
|
| 6809 Microprocessor Chip Part #: 6809 Condition: New
6809 central processing unit (CPU) chip used on some electronic pinball games. Motorola brand, # MC6809P.
Use with ... more
More Info | Related Items | Order
|
$13.50 each
Order
|
| 68B09E Microprocessor Chip Part #: 68B09E Condition: New
Main CPU chip as used on many later-model pinball games including Bally/Williams System 11C, WPC, WPC-S, and WPC-95 games (chip... more
More Info | Related Items | Order
|
$10.00 each
Order
|
| 6810 Static RAM (SRAM) Chip Part #: 6810 Condition: New
128 x 8 static ram (SRAM) chip, 24-pins, DIP. Used on many early-model makes and models for static RAM memory. Used as IC13 &... more
More Info | Related Items | Order
|
$7.50 each
Order
|
| 6821 PIA Chip Part #: 6821 Condition: New
6821 peripheral interface adapter (PIA) chip, as used on most vintage Bally, Stern, Williams, Data East, and other games.... more
More Info | Related Items | Order
|
$8.50 each
Order
|
| UDN7180 Display Driver IC Part #: UDN7180 Condition: New
Display segment driver IC for lower-voltage gas/plasma display tubes, as used on some alpha-numeric tubes on some Gottlieb and... more
More Info | Related Items | Order
|
$8.95 each
Order
|
| UDN7180A Display Driver IC Part #: UDN7180A Condition: New
Display segment driver IC for high-voltage gas/plasma display tubes, as used on early solid-state Williams games, and similar.... more
More Info | Related Items | Order
|
$7.95 each
(32 Available)
Order
|
| 7400N Quad 2-Input Positive NAND Logic Gate IC Part #: 7400 Condition: New
TTL logic gate IC as used in coil driver circuits, lamp/switch driver circuits, and display driver circuits in many solid-state... more
More Info | Related Items
|
$1.99 each
Temporarily out. Please check back. more info...
|
| 74HCT00N Quad 2-Input Logic Gate IC Part #: 74HCT00N Condition: New
Quad 2-input logic gates IC. Used on Bally and Williams Fliptronics and Fliptronics II boards. Possible other... more
More Info | Related Items | Order
|
$1.39 each
Order
|
| 74LS02 Quad 2-Input Positive NOR-Gates IC Part #: 74LS02 Condition: New
TTL logic gate IC as used in coil driver circuits on Williams solid-state games, lamp and switch driver circuits, and other... more
More Info | Related Items | Order
|
$1.68 each
Order
|
| 7404 Hex Inverter IC Part #: 7404 Condition: New
TTL inverter IC containing 6 (hex) individual inverter circuits. Commonly used in switch matrix circuits and similar... more
More Info | Related Items | Order
|
$1.68 each
Order
|
| 74LS05 Hex Inverter IC Part #: 74LS05 Condition: New
Hex inverter IC with open collector outputs. Replaces 74LS05N, DM74S05N, and similar others.
Use with ... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| 74LS06 Hex Inverter Buffer/Driver IC Part #: 74LS06 Condition: New
Hex inverter buffer/driver IC. Replaces 7406, 7406N, and similar others.
Use with ... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| 74LS07 Hex Buffer/Driver IC Part #: 74LS07 Condition: New
Hex buffer/driver IC with high-voltage open-collector outputs. As used in display driver circuitry in many solid-state games... more
More Info | Related Items | Order
|
$1.80 each
Order
|
| 74LS08 Quad 2-Input Positive AND Gate IC Part #: 74LS08 Condition: New
TTL logic gate IC as used in coil driver circuits on Williams solid-state games, lamp and switch driver circuits, and other... more
More Info | Related Items | Order
|
$1.68 each
Order
|
| 74LS10N Triple 3-Input Positive NAND Gate IC Part #: 74LS10N Condition: New
Triple 3-input positive NAND gate IC.
Use with 14-pin chip socket.
All sales... more
More Info | Related Items | Order
|
$1.49 each
(8 Available)
Order
|
| 74LS11 Dual Flip-Flop IC Part #: 74LS11 Condition: New
Dual J-K negative-edge triggered flip-flop with preset and clear.
More Info | Related Items | Order
|
$2.40 each
Order
|
| 74LS16 8-bit Shift Register IC Part #: 74LS16 Condition: New
8-bit parallel-out serial shift register IC.
Use with 14-pin chip... more
More Info | Related Items | Order
|
$2.72 each
Order
|
| 7417 Hex Flip-Flop IC Part #: 7417 Condition: New
Hex D-type flip-flop with clear. Ships as SN7417N.
Use with 14-pin chip... more
More Info | Related Items | Order
|
$2.20 each
Order
|
| 74LS20N Dual 4-Input Logic Gates IC Part #: 74LS20N Condition: New
Dual 4-input logic gates IC.
Use with 14-pin chip socket.
All sales are... more
More Info | Related Items | Order
|
$1.79 each
(8 Available)
Order
|
| 74LS32 Quad 2-Input Logic Gates IC Part #: 74LS32 Condition: New
Quad 2-input logic gates IC.
Use with 14-pin chip socket.
All sales are... more
More Info | Related Items | Order
|
$1.10 each
(5 Available)
Order
|
| 74LS37 Octal Latch & Flip-Flop IC Part #: 74LS37 Condition: New
Octal D-type transparent latch and edge-triggered flip-flop IC.
More Info | Related Items | Order
|
$1.89 each
Order
|
| 74LS74AN Dual Flip-Flop IC Part #: 74LS74AN Condition: New
Dual D-type positive-edge-triggered flip-flop with preset and clear.
Use with 14-pin... more
More Info | Related Items | Order
|
$1.24 each
Order
|
| AY-3-8910 Sound Generator Chip Part #: AY-3-8910 Condition: New
40-pin programmable sound generator chip, manufactured by General Instrument or MicroChip. Used in many pinball and video games... more
More Info | Related Items | Order
|
$12.00 each
Order
|
| 9602 Dual Monostable Multivibrator IC Part #: 9602 Condition: New
Used as chip U16 on early Bally and Stern MPU boards as part of the clock circuitry. 16-pin DIP dual monostable multivibrator.... more
More Info | Related Items | Order
|
$4.10 each
Order
|
| Lamp Driver Decoder IC (Bally / Stern) Part #: 14514 Condition: New
24-pin CMOS latch/decoder IC, as used on lamp driver boards in Bally and Stern solid-state pinball games. Replaces Bally #... more
More Info | Related Items | Order
|
$4.00 each
Order
|
| 62256 (32k x 8) SRAM Chip Part #: 62256 Condition: New
32k x 8 asynchronous static RAM (SRAM) chip, 28-pins, DIP, 70ns access time. Used on many later-model Bally/Williams games.... more
More Info | Related Items | Order
|
$9.95 each
(1 Available)
Order
|
| 74LS123 Multivibrator IC Part #: 74LS123 Condition: New
Dual retrigger monostable multivibrator IC.
Use with 16-pin chip socket.
All... more
More Info | Related Items | Order
|
$1.20 each
Order
|
| 74LS126AN Quad Bus Buffer IC Part #: 74LS126AN Condition: New
Quad bus buffer & line driver IC with 3-state outputs.
Use with 14-pin chip... more
More Info | Related Items | Order
|
$1.52 each
(8 Available)
Order
|
| 74HCT138N Line Decoder IC Part #: 74HCT138N Condition: New
Line decoder IC. Used on Bally and Williams Fliptronics and Fliptronics II boards. Possible other applications.... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| 74LS138N Line Decoder IC Part #: 74LS138N Condition: New
Line decoder IC.
Use with 16-pin chip socket.
All sales are final on... more
More Info | Related Items | Order
|
$1.49 each
(35 Available)
Order
|
| 74HCT139E Line Encoder / Decoder / Multiplexer IC Part #: 74HCT139E Condition: New
Dual 2-of-4 line encoder, decoder, multiplexer, demultiplexer IC. Used in some pinball PCB applications including Gottlieb... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| 74LS139 Decoder IC Part #: 74LS139 Condition: New
Dual 2-line to 4-line decoder/demultiplexer IC.
Use with 16-pin chip... more
More Info | Related Items | Order
|
$1.08 each
Order
|
| 74154N 4-to-16 Decoder IC Part #: 74154 Condition: New
4-to-16 decoder IC. As used in Bally and Stern solid-state pinball games for decoding solenoid drive signals from the MPU... more
More Info | Related Items | Order
|
$4.60 each
Order
|
| 74HC237E Decoder / Demultiplexer IC Part #: 74HC237 Condition: New
Encoder, decoder, multiplexer & demultiplexer 3 to 8 HS CMOS IC. Used as chip U23 on Bally/Williams WPC-95 MPU boards for... more
More Info | Related Items | Order
|
$1.19 each
Order
|
| 74HCT240N Octal Buffer / Driver IC Part #: 74HCT240N Condition: New
Octal buffer / line driver IC with 3-state outputs.
Use with 20-pin chip... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 74LS240N Octal Buffer / Driver IC Part #: 74LS240N Condition: New
Octal buffer / line driver IC with 3-state outputs.
Use with 20-pin chip... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| 74HCT244N Octal Buffer / Line Driver IC Part #: 74HCT244N Condition: New
Octal buffer / line driver IC with 3-state outputs.
Use with 20-pin chip... more
More Info | Related Items | Order
|
$1.00 each
Order
|
| 74LS244N Octal Buffer / Line Driver IC Part #: 74LS244N Condition: New
Octal buffer / line driver IC with 3-state outputs.
Use with 20-pin chip... more
More Info | Related Items | Order
|
$1.55 each
(10 Available)
Order
|
| 74LS245N Octal Bus Transceiver IC Part #: 74LS245N Condition: New
Octal bus transceiver IC.
Use with 20-pin chip socket.
All sales are final... more
More Info | Related Items | Order
|
$1.55 each
(13 Available)
Order
|
| 74HCT273N Octal Flip-Flop IC Part #: 74HCT273N Condition: New
Octal D-type flip-flop with clear. As used in many later-model games for translating data/address buss signals to individual... more
More Info | Related Items | Order
|
$1.40 each
Order
|
| 74LS273 Octal Flip-Flop IC Part #: 74LS273 Condition: New
Octal D-type flip-flop with clear. As used in many later-model games for translating data/address buss signals to individual... more
More Info | Related Items | Order
|
$1.40 each
Order
|
| 74365AN Hex Buss Driver IC Part #: 74365 Condition: New
Hex buss driver with 3-state output.
Use with 16-pin chip socket.
All sales... more
More Info | Related Items
|
$2.88 each
Call or e-mail |
| 74HC373N Tri-State Octal Latch IC Part #: 74HC373N Condition: New
Tri-state octal D-type latch IC. Used for display segment control in some Bally 6803 pinball games and possible other... more
More Info | Related Items | Order
|
$1.49 each
(10 Available)
Order
|
| 74LS374 Octal Latch & Flip-Flop IC Part #: 74LS374 Condition: New
Octal D-type transparent latch and edge-triggered flip-flop. As used in many later-model games for translating data/address... more
More Info | Related Items | Order
|
$3.20 each
Order
|
| 74HCT374 Octal Latch & Flip-Flop IC Part #: 74HCT374 Condition: New
Octal D-type transparent latch and edge-triggered flip-flop. As used in many later-model games for translating data/address... more
More Info | Related Items | Order
|
$3.20 each
Order
|
| 74HCT574N Tri-State Octal Flip-Flop IC Part #: 74HCT574N Condition: New
74HCT574N Tri-State Octal Flip-Flop IC
More Info | Related Items | Order
|
$1.39 each
Order
|
| 74HC4050 / 14050 Hex Inverting Buffer IC Part #: 74HC4050 Condition: New
Replaces 14050 and 14049 buffer ICs, as used in switch matrix driver circuitry and others. Hex inverting logic level down... more
More Info | Related Items | Order
|
$2.84 each
Order
|
Chip Sockets:
Always install a chip socket when replacing a non-socketed chip on your game's circuit boards! A chip socket allows for quick, easy, solder-less removal and replacement for testing or repair in the future, and saves your valuable circuit board from unnecessary soldering heat that can damage or shorten it's lifespan.
|
| Chip Sockets:
We feature high-quality machined-pin chip sockets which provide maximum connection/grip between chip socket and chip legs for reliable long-term performance, and far out-perform factory original standard low-profile non-machined pin sockets.
NOTE: Always install a chip socket when replacing a non-socketed chip on your game's circuit boards! A chip socket allows for quick, easy, solder-less removal and replacement for testing or repair in the future, and saves your valuable circuit board from unnecessary soldering heat that can cause damage or shorten it's lifespan.
# of Pins: |
Size (LxWxH): |
As used for: |
Part #: |
Price: |
Order: |
8 | 7/16" x 3/8" x 5/16" (10mm x 10mm x 8mm) | 555 timer and other IC's.
| SOC8PINM
| $0.60 | Order
|
14 | 23/32" x 3/8" x 5/16" (18mm x 10mm x 8mm) | 7402, 7408, 723 regulator, and other TTL/CMOS IC's.
| SOC14PINM
| $1.36 | Order
|
16 | 25/32" x 3/8" x 5/16" (20mm x 10mm x 8mm) | 556 timer, LM3900 amplifier, and other TTL/CMOS IC's.
| SOC16PINM
| $1.48 | Order
|
18 | 7/8" x 3/8" x 5/16" (23mm x 10mm x 8mm) | ULN2803A switch matrix driver, and display digit/segment drivers UDN7180A, UDN6118A & UDN6184A, & more.
| SOC18PINM
| $1.93 | Order
|
20 | 1" x 3/8" x 5/16" (25mm x 10mm x 8mm) | Many TTL IC's in late-model games.
| SOC20PINM
| $1.85 | Order
|
22 | 1-1/16" x 3/8" x 5/16" (28mm x 10mm x 8mm) | Bally U8, Williams IC19, Stern U8/U13 5101 CMOS RAM, more
| SOC22PINM
| $2.04 | More Info...
|
24 | 1-3/16" x 3/8" x 5/16" (30mm x 10mm x 8mm) | Many TTL IC's in late-model games.
| SOC24PINM
| $2.22 | Order
|
24 | 1-3/16" x 11/16" x 5/16" (30mm x 17mm x 8mm) | WIDE socket for ROM/PROM chips 2716, 2732, 2532, 9316, 9332, and 6810 RAM, more.
| SOC24PINMW
| $2.50 | Order
|
28 | 1-3/8" x 11/16" x 5/16" (35mm x 17mm x 8mm) | WIDE socket for RAM/ROM/PROM chips 6116, 6264, etc.
| SOC28PINM
| $2.75 | Order
|
40 | 2" x 11/16" x 5/16" (60mm x 17mm x 8mm) | WIDE socket for PIA chips 6820/6821, ROM chips, CPU chips, more.
| SOC40PINM
| $3.84 | Order
|
|
Score Displays & Parts:
| Bally / Stern 6-Digit LED Display Part #: PS6D Condition: New
New modern LED unit! Plug & Play Installation! Replace your aging, burned-out, or flickering original displays with... more
More Info | Related Items | Order
|
$64.95 each
(4 Available)
Order
|
| Bally / Stern 7-Digit LED Display Part #: PS7D Condition: New
New modern LED unit! Plug & Play Installation! Replace your aging, burned-out, or flickering original displays with... more
More Info | Related Items | Order
|
$64.95 each
(5 Available)
Order
|
| Score Display, Dot Matrix 128 x 32 - Glass Hi-Voltage Part #: DMD001 Condition: New
Complete, brand new unit! Just plug it in and play! 128 x 32 dot-matrix score display unit, as used in most pinball... more
More Info | Related Items | Order
|
$219.95 each
(7 Available)
Order
|
| Score Display, Dot Matrix - Large 192 x 64 (Sega) Part #: DMD002 Condition: New
Large 192 x 64 dot-matrix score display used in a few older Data East and Sega games (see game list below). Complete brand new... more
More Info | Related Items
|
$649.95 each
Call or e-mail |
| 192 x 64 Display Wiring Upgrade Kit - Data East / Sega Games Part #: 500-6326-00 Condition: New
This factory service upgrade kit addresses a problem with games that use the large 192 x 64 dot matrix display where the... more
More Info | Related Items
|
$20.00 each
Currently Unavailable more info...
|
| Score Display - Gottlieb Dual 20-Digit Alpha-Numeric Part #: MA-1361 Condition: New
Plug-and-play replacement score display assembly as used on early Gottlieb System 3 games. Features PC board with two 20-digit... more
More Info | Related Items
|
$195.00 each
Currently Unavailable more info...
|
| Quad Opto Board (Gottlieb) Part #: MA-1925 Condition: New
Quad opto driver board as used in some late-model Gottlieb and Premier games. Includes mounting brackets.
More Info | Related Items | Order
|
$45.00 each
(1 Available)
Order
|
| Sega / Stern Pinball Dot Matrix Display Power Supply PCB Part #: 520-5138-00 Condition: New
Power supply PCB assembly for Sega and Stern Whitestar and SAM pinball games that use ... more
More Info | Related Items | Order
|
$79.95 each
(1 Available)
Order
|
| Score Display Power Supply Rebuild Kit - Williams (1977-1988) Part #: KIT_WMS_HV1 Condition: New
Rebuild the score display high-voltage power supply circuitry in your Williams solid-state pinball game with this handy kit.... more
More Info | Related Items | Order
|
$36.38 each
Order
|
| Score Display Power Supply Rebuild Kit - Bally/Williams (1988-1991) Part #: KIT_WMS_HV2 Condition: New
Rebuild the score display high-voltage power supply circuitry in your Williams solid-state pinball game with this handy kit.... more
More Info | Related Items | Order
|
$22.92 each
Order
|
| Data East High-Voltage Power Supply Rebuild Kit for PS # 520-5000-00 Part #: KIT_DE_HV1 Condition: New
20-piece kit for use with Data East power supply # 520-5000-00 (see note and game listing below).
Rebuild the score... more
More Info | Related Items | Order
|
$36.49 each
Order
|
| Data East High-Voltage Power Supply Rebuild Kit for PS # 520-5047-00 Part #: KIT_DE_HV2 Condition: New
23-piece kit for use with Data East power supply # 520-5047-00 (see note and game listing below).
Rebuild the score... more
More Info | Related Items | Order
|
$28.29 each
Order
|
| Data East High-Voltage Power Supply Rebuild Kit for PS # 520-5047-01 Part #: KIT_DE_HV3 Condition: New
24-piece kit for use with Data East power supply # 520-5047-01 (see note and game listing below).
Rebuild the score... more
More Info | Related Items | Order
|
$34.19 each
(5 Available)
Order
|
| Data East High-Voltage Power Supply Rebuild Kit for PS # 520-5047-02 Part #: KIT_DE_HV4 Condition: New
25-piece kit for use with Data East power supply # 520-5047-02 (see note and game listing below).
Rebuild the score... more
More Info | Related Items | Order
|
$34.69 each
(5 Available)
Order
|
Rectifiers & Diodes:
| Power Rectifier- 35 amp 400v, Wire Leads Part #: REC3504W Condition: New
Heavy-duty replacement rectifier for most electronic solid-state (SS) pinball games- old and new models. Rated at 35 amps, 400... more
More Info | Related Items | Order
|
$7.95 each
Order
|
| Power Rectifier- 35 amp 400v, Lug Leads Part #: REC3504L Condition: New
Heavy-duty replacement rectifier for use in many models of pinball games- old and new. Used in many Data East and Williams... more
More Info | Related Items | Order
|
$7.95 each
Order
|
| Power Rectifier- VJ248 Type Part #: VJ248 Condition: New
As used in early Bally (1977-1980) and Stern (1977-1984) electronic solid-state (SS) pinballs (For Bally games 1981-up, use ... more
More Info | Related Items | Order
|
$3.89 each
(8 Available)
Order
|
| 1N4001 Diode Part #: 1N4001 Condition: New
Non-stock item. Use 1N4004 as replacement. Replaces Data East / Sega / Stern # 112-5001-00... more
More Info | Related Items
|
SOLD OUT more info...
|
| 1N4004 Diode Part #: 1N4004 Condition: New
1N4004 diode. Also replaces 1N4001, 1N4002, and 1N4003. As used on most devices including flipper and bumper coils (solenoids),... more
More Info | Related Items | Order
|
$0.25 each
Order
|
| Rectifier Diode - Large, 6A 400 PIV Part #: P600D Condition: New
Large diode used as power rectifier in many applications, including Williams solid-state L3-L7 power supply (2 used),... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| 1N4148 Diode Part #: 1N4148 Condition: New
General purpose switching diode. Commonly used on switches in Bally and Stern solid-state (SS) pinball games (1977 to approx.... more
More Info | Related Items | Order
|
$0.25 each
Order
|
| 1N4730A Zener Diode Part #: 1N4730A Condition: New
3.9 volt 1-watt Zener diode, DO-41 case. Supercedes old part # 1N4730.
More Info | Related Items | Order
|
$0.49 each
Order
|
| 1N4733A Zener Diode Part #: 1N4733A Condition: New
5.1 volt 1-watt Zener diode, DO-41 case. Supercedes old part # 1N4733.
More Info | Related Items | Order
|
$0.30 each
Order
|
| 1N4742A Zener Diode Part #: 1N4742A Condition: New
12 volt 1.3-watt Zener diode, DO-41 case. Supercedes old part # 1N4742. Used for zener diode D11 in high-voltage display power... more
More Info | Related Items | Order
|
$0.25 each
Order
|
| 1N4743A Zener Diode Part #: 1N4743A Condition: New
13 volt 1.3-watt Zener diode, DO-41 case. Supercedes old part # 1N4743. Used for zener diode D11 in high-voltage display power... more
More Info | Related Items | Order
|
$0.25 each
Order
|
| 1N4760A Zener Diode Part #: 1N4760A Condition: New
68 volt 1.3-watt Zener diode, DO-41 case. Supercedes old part # 1N4760. Used for zener diode D9 in high-voltage display power... more
More Info | Related Items | Order
|
$0.25 each
Order
|
| 1N4764A Zener Diode Part #: 1N4764A Condition: New
100.0 volt 1-watt Zener diode, DO-41 case. Supercedes old part # 1N4764. Used in high-voltage display power supply circuitry in... more
More Info | Related Items | Order
|
$0.30 each
Order
|
| 1N5228B Zener Diode Part #: 1N5228B Condition: New
3.9 volt 1/2-watt Zener diode, DO-35 case. Supercedes old part # 1N5990. Used for zener diodes ZR1 and ZR3 in high-voltage... more
More Info | Related Items | Order
|
$0.31 each
Order
|
| 1N5379B Zener Diode Part #: 1N5379B Condition: New
110 volt 5-watt Zener diode. Used in location D10 on Data East power supply board # 520-5047-00 for score display high voltage... more
More Info | Related Items | Order
|
$1.39 each
Order
|
Relays & Relay Parts:
| Relay Coils:
See our Coils (Solenoids) page for full listing.
|
| Small Stepper Unit Ratchet Arm / Finger (Gottlieb) Part #: A-7561 Condition: New
Small relay-activated arm with spring-loaded nylon 'finger' for use on small stepper units in older Gottlieb electro-mechanical... more
More Info | Related Items | Order
|
$21.95 each
(14 Available)
Order
|
| Relay Armature Plate (Bally) Part #: P-7469-1 Condition: New
Metal actuator armature or plate as used on relay assemblies in many Bally electro-mechanical (EM) pinball games. This is the... more
More Info | Related Items
|
$2.50 each
Currently Unavailable more info...
|
| Relay, 48-volt DPDT - Flipper Enable (K1) (Bally / Stern) Part #: RELAY_BLY_K1 Condition: New
Replacement K1 relay for flipper enable, as used on original Bally and Stern solenoid/regulator boards in solid-state (SS)... more
More Info | Related Items
|
$14.95 each
Currently Unavailable more info...
|
| Relay, 6-volt DPDT - Flipper Enable (K1) (Bally / Williams / Data East) Part #: RELAY_WMS_K1 Condition: New
Replacement 6-volt flipper enable relay used in many Bally, Williams, and Data East games. Replaces "K1" relay in... more
More Info | Related Items | Order
|
$21.49 each
Order
|
| Relay, 12-volt DPDT - Flipper Enable (Bally/Williams WPC Games) Part #: RELAY_WPC Condition: New
Flipper control/enable relay used on power/driver boards in early pre-Fliptronics WPC pinball games by Bally and Williams... more
More Info | Related Items | Order
|
$21.49 each
Order
|
| Relay - 100VDC 4PDT Part #: RELAY_100V Condition: New
Not a pinball part, but we have a surplus of 100VDC 4PDT relays. Not sure where they came from or what they're used for, but... more
More Info | Related Items | Order
|
$5.00 each
Order
|
| Relay Snubber Board Assy, 24 Volt Part #: C-11232R Condition: New
Relay board for controlling coils (A/C select relay), motors, and/or general illumination lights, as used in many Bally and... more
More Info | Related Items
|
$39.95 each
Currently Unavailable more info...
|
| Relay Snubber Board Assy, 24 Volt (USED) Part #: C-11232 Condition: Used
Used relay board for controlling coils (A/C select relay), motors, and/or general illumination lights, as used in many Bally... more
More Info | Related Items
|
$20.00 each
SOLD OUT more info...
|
Resistors:
We carry many different types of resistors for most common pinball applications. Resistors are listed below by wattage (W) and resistance (Ohms), in ascending order (lowest to highest).
Need a resistor that isn't listed below? Just e-mail us.
Section Contents:
- 1/4-Watt Resistors
- 1/2-Watt Resistors
- 1-Watt to 10-Watt Resistors
|
|
Resistor Color Code Chart:
(Click for Large View)
|
|
| 1/4-Watt Resistors 25¢ each:
Available individually in various values. 5% tolerance, and standard carbon-film type resistors (unless otherwise noted). If you need a specific type of resistor for a specific application, e-mail us before ordering, to confirm availability.
No returns, exchanges, or refunds on electronic parts- all sales are final.
Part number format: RES[value]-1/4W
Examples: RES39-1/4W, RES2.7K-1/4W
|
Value (Ohms): |
Add to Cart: |
0 Replaces Bly/Wms # 5010-09534-00 | Order
| 1 | Order
| 2.2 | Order
| 10 | Order
| 15 | Order
| 22 | Order
| 33 | Order
| 39 | Order
| 47 | Order
| 51 | Order
| 68 | Order
| 82 | Order
| 100 | Order
| 120 | Order
| 150 | Order
| 180 | Order
| 220 | Order
| 270 | Order
| 330 | Order
| 390 | Order
| 470 | Order
|
|
Value (Ohms): |
Add to Cart: |
510 | Order
| 560 | Order
| 680 | Order
| 820 | Order
| 1k | Order
| 1.2k | Order
| 1.5k | Order
| 1.8k | Order
| 2.2k | Order
| 2.7k | Order
| 3k | Order
| 3.3k | Order
| 3.9k | Order
| 4.7k | Order
| 5.1k | Order
| 5.6k | Order
| 6.8k | Order
| 8.2k | Order
| 10k | Order
| 12k | Order
| 15k | Order
| 18k | Order
| 22k | Order
| 27k | Order
|
|
Value (Ohms): |
Add to Cart: |
30k | Order
| 33k | Order
| 39k | Order
| 47k | Order
| 51k | Order
| 56k | Order
| 68k | Order
| 82k | Order
| 100k | Order
| 120k | Order
| 150k | Order
| 180k | Order
| 220k | Order
| 270k | Order
| 300k | Order
| 330k | Order
| 470k | Order
| 1 meg | Order
| 1.5 meg | Order
| 2.2 meg | Order
| 3.3 meg | Order
| 4.7 meg | Order
| 10 meg | Order
|
|
|
| 1/2-Watt Resistors:
Popular values for many pinball applications. Available individually. If you need a specific type of resistor for a specific application, e-mail us before ordering, to confirm availability. No returns, exchanges, or refunds on electronic parts- all sales are final.
Need a resistor not listed here? We may have it, or can get it. Just e-mail us!
Value (Ohms): |
Part #: |
Price: |
Add to Cart: |
Other: |
68
| RES68-1/2W
| $0.50 | Order
| Used in solenoid driver transistor circuits in Williams solid-state games.
|
100
| RES100-1/2W
| $0.50 | Order
|
|
330
| RES330-1/2W
| $0.50 | Order
|
|
390
| RES390-1/2W
| $0.50 | Order
|
|
680
| RES680-1/2W
| $0.50 | Order
| Used in display high voltage circuitry on Williams solid-state games.
|
1k
| RES1K-1/2W
| $0.50 | Order
|
|
1.2k
| RES1.2K-1/2W
| $0.50 | Order
|
|
1.5k
| RES1.5K-1/2W
| $0.50 | Order
| Used for R12 & R13 on late-model Data East power supplies.
|
10k
| RES10K-1/2W
| $0.50 | Order
| Used for segment display on master display unit in Williams games. Common failure part.
|
100k
| RES100K-1/2W
| $0.50 | Order
| Used on Bally and Stern 6/7 digit score displays. Replaces original 1/4-watt resistors which are prone to failure from heat buildup (R1, R3, R5, R7, R9, etc). Replace 1/4-watt with 1/2-watt resistor for longer life.
|
220k
| RES220K-1/2W
| $0.50 | Order
|
|
330k
| RES330K-1/2W
| $0.50 | Order
| Used in display high voltage circuitry on Williams solid-state games.
|
|
|
| 1-Watt Resistors:
Available individually in various values and types. If you need a specific type of resistor for a specific application, e-mail us before ordering, to confirm availability. No returns, exchanges, or refunds on electronic parts- all sales are final.
Need a resistor not listed here? We may have it, or can get it. Just e-mail us!
Value (Ohms): |
Part #: |
Price: |
Add to Cart: |
Other: |
82
| RES82-1W
| $0.99 | Order
| Resistor # R11 on early Bally and Stern solid-state MPU boards- commonly overheated/burned. Handles current for 5v logic power supply.
|
100
| RES100-1W
| $0.99 | Order
| For Bally/Williams relay "snubber" boards. (Use 2-watt version below. Runs cooler, lasts longer.)
|
220
| RES220-1W
| $0.99 | Order
|
|
39k
| RES39K-1W
| $0.99 | Order
| For Bally/Williams power supply- display voltage circuitry. (Use 2-watt version below. Runs cooler, lasts longer.) |
47k
| RES47K-1W
| $0.99 | Order
| Used for R8 & R9 on some late Data East power supplies.
|
|
|
| 2-Watt Resistors:
Available individually in various values and types. If you need a specific type of resistor for a specific application, e-mail us before ordering, to confirm availability. No returns, exchanges, or refunds on electronic parts- all sales are final.
Need a resistor not listed here? We may have it, or can get it. Just e-mail us!
Value (Ohms): |
Part #: |
Price: |
Add to Cart: |
Other: |
27
| RES27-2W
| $0.99 | Order
| Lamp matrix power resistor for Williams L3-L7 driver boards. Metal-film resistor. 8 used per driver board.
|
100
| RES100-2WFP
| $0.99 | Order
| As used on snubber relay boards in Bally/Williams System 11 games and Data East games. Excellent upgrade replacement for original under-rated part.
|
270
| RES270-2W
| $0.99 | Order
| For Bally/Williams opto PC boards (replacement for the big "blue" resistors). Flameproof power resistor.
|
39k
| RES39K-2W
| $0.99 | Order
| For Bally/Williams power supply- display voltage circuitry. Common failure part- 2 used per game.
|
|
|
| 5-Watt Resistors:
Available individually in various values and types. 5 watt ceramic power resistors measure 7/8 inch (22mm) x 3/8 inch (10mm) x 3/8 inch (10mm).
If you need a specific type of resistor for a specific application, e-mail us before ordering, to confirm availability.
No returns, exchanges, or refunds on electronic parts- all sales are final.
Need a resistor not listed here? We may have it, or can get it. Just e-mail us!
Value (Ohms): |
Part #: |
Price: |
Add to Cart: |
Other: |
1/3
| RES1/3-5W
| $0.99 | Order
| 1/3 (.33) ohm resistor. Used in some Gottlieb games. This is a standard block ceramic resistor that replaces the original flameproof/wirewound blue resistor in these games.
|
25
| RES25-5W
| $0.99 | Order
| Replacement for resistor R2 on early Bally/Stern power/rectifier boards.
|
27
| RES27-5W
| $0.99 | Order
| Upgrade for Williams L3-L7 driver boards. Ceramic power resistor. Replaces original 2-watt metal-film resistors and provides much better heat dissipation- helps your board run cooler and last longer. 8 used per driver board.
|
130
| RES130-5W
| $0.99 | Order
| Used on Data East power supply boards.
|
2K
| RES2K-5W
| $0.99 | Order
| Used on Data East power supply boards.
|
|
|
| 7-Watt Resistors:
7-Watt resistors are discontinued (obsolete) and no longer being manufactured. Use equivalent 10-watt replacement (below), as required. 10-watt resistors are longer than 7-watt and may require alternative mounting, depending on your exact application.
|
 Ceramic
 Wirewound
| 10-Watt Resistors:
Available individually in various values and types- ceramic or wirewound (as specified). 10 watt resistors measure 1-7/8 inch (48mm) x 3/8 inch (10mm) x 3/8 inch (10mm).
If you need a specific type of resistor for a specific application, e-mail us before ordering, to confirm availability.
No returns, exchanges, or refunds on electronic parts- all sales are final.
Need a resistor not listed here? We may have it, or can get it. Just e-mail us!
Value (Ohms):Type: |
Part #: |
Price: |
Add to Cart: |
Other: |
5 Ohms Ceramic
| RES5-10W
| $1.29 | Order
| For Bally/Williams flashlamp circuits, as used on games circa late 1980's (F-14 Tomcat and others). Replaces original shorter 7-watt resistor (discontinued), and may require slight modification for mounting. Use in conjunction with 330-ohm 10-watt resistor (below).
|
330 Ohms Ceramic
| RES330-10W
| $1.29 | Order
| For Bally/Williams flashlamp circuits, as used on games circa late 1980's (F-14 Tomcat and others). Use in conjunction with 5-ohm 10-watt resistor (above).
|
470 Ohms Ceramic
| RES470-10W
| $1.29 | Order
|
|
500 Ohms Ceramic
| RES500-10W
| $1.29 | Order
| Used for display power supply on some Data East games.
|
600 Ohms Ceramic
| RES600-10W
| $1.29 | Order
| Power resistor R1 for early Bally and Stern solid-state pinball power/rectifier boards. (Discontinued- use 620 ohm below.)
|
620 Ohms Ceramic
| RES620-10W
| $1.29 | Order
| Current replacement for resistor R1 on early Bally/Stern solid-state pinball power/rectifier boards (replaces obsolete 600 ohm unit).
|
4k Ohms Wirewound
| RES4K-10W
| $2.49 | Order
| Used for display power supply on some Data East games.
|
|
|
Resistor Networks:
|
Resistor network or "array". High-failure parts in most original Williams System 11 games (1986-1990). Used in MPU board circuitry for switch matrix, display data/signal lines, solenoid control lines, and similar. Used in many other makes/models of solid-state pinball games as well.
Available individually in various values, sizes, and types, for most common pinball applications. If you need a specific type of network for a specific application, e-mail us before ordering, to confirm availability. No returns, exchanges, or refunds on electronic parts- all sales are final.
Note on resistor/capacitor networks: RC networks are no longer available. If you need to replace an RC network, you can usually do so with only a resistor network (no capacitors in the network). This will work for most pinball applications.
|
|
Resistor network types:
Bussed:
Isolated:
|
|
Value (Ohms): |
Type: |
# of Pins: |
Part #: |
Price Each: |
Add to Cart: |
470 ohm | Bussed | 10
| RNET470-10PB
| $1.00 | Order
|
560 ohm | Bussed | 10
| RNET560-10PB
| $1.50 | Order
|
1.0k ohm | Bussed | 8
| RNET1.0K-8PB
| $1.50 | Order
|
1.0k ohm | Bussed | 10
| RNET1.0K-10PB
| $1.50 | Order
|
3.3k ohm | Bussed | 10
| RNET3.3K-10PB
| $1.50 | Order
|
4.7k ohm | Bussed | 8
| RNET4.7K-8PB
| $1.50 | Order
|
4.7k ohm | Bussed | 10
| RNET4.7K-10PB
| $1.00 | Order
|
18k ohm | Bussed | 10
| RNET18K-10PB
| $1.50 | Order
|
|
|
Regulators:
| 2N6057 NPN Transistor Part #: 2N6057 Condition: New
Large transistor in TO-3 case/package. Commonly used for voltage regulator and solenoid driver in many electronic solid-state... more
More Info | Related Items | Order
|
$4.95 each
Order
|
| 2N6059 NPN Transistor Part #: 2N6059 Condition: New
OBSOLETE / DISCONTINUED. Use # 2N6057 instead.
Replaces 2N6057 regulator transistor.... more
More Info | Related Items
|
$4.95 each
Discontinued more info...
|
| LM317K 5V Voltage Regulator Part #: LM317K Condition: New
Type LM317K for use in 5v power supply regulator circuitry. As used in later-model Bally/Williams pinball games, approx.... more
More Info | Related Items | Order
|
$5.99 each
(22 Available)
Order
|
| LM323K 5V Voltage Regulator Part #: LM323K Condition: New
Type LM323K for use in 5v power supply regulator circuitry. As used on most all electronic pinball machines from 1977 on up,... more
More Info | Related Items | Order
|
$7.49 each
Order
|
| LM7805CT Regulator IC Part #: LM7805CT Condition: New
Linear voltage regulator in TO-220 case. Ships as LM7805CT. Commonly used on sound boards in older Bally games, and for 12-volt... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| LM7905CT Negative 5V Voltage Regulator Transistor Part #: LM7905CT Condition: New
Negative 5 volt DC (-5vdc) regulator transistor. 3 terminals, TO-220 case. Interchanges with UA7905UC, SG7905CP. Replaces... more
More Info | Related Items | Order
|
$1.59 each
Order
|
| MC7812CTG 12V 1A Voltage Regulator Part #: MC7812CTG Condition: New
Type 7812 regulator in standard TO-220 case. 12 volts, 1 amp, positive polarity. Used for 12-volt regulation on Bally/Williams... more
More Info | Related Items | Order
|
$2.49 each
Order
|
| TL783C High Voltage Regulator Part #: TL783C Condition: New
High-voltage regulator as used for score display power on some aftermarket solenoid driver / voltage regulator boards for older... more
More Info | Related Items | Order
|
$3.29 each
Order
|
Ribbon Cables:
| Ribbon Cable - 34-pin 23.5-inch 4-connector Part #: 5795-13018-01 Condition: New
4-connector ribbon cable with 34 pins per connector, 23-1/2 inch overall length. Used on most Bally/Williams WPC pinball games.... more
More Info | Related Items
|
$15.60 each
Temporarily out. Please check back. more info...
|
| Ribbon Cable - 20-pin 9-inch 2-connector Part #: 5795-10937-09 Condition: New
Short 9-inch ribbon cable with two 20-pin connector housings on each end. Used in some Bally and Williams games.
More Info | Related Items | Order
|
$9.95 each
Order
|
| Ribbon Cable - 26-pin 30-inch 2-connector Part #: 5795-10938-30 Condition: New
2-connector ribbon cable with 26 pins per connector, 30-inch overall length. Used for alphanumeric score display connection on... more
More Info | Related Items | Order
|
$14.25 each
(1 Available)
Order
|
| Ribbon Cable - 34-pin 3-3/4 inch 2-connector Part #: 5795-12653-03 Condition: New
2-connector ribbon cable with 34 pins per connector, 3-3/4 inches overall length. Used between MPU board and power/driver board... more
More Info | Related Items | Order
|
$5.71 each
(2 Available)
Order
|
| Ribbon Cable - 34-pin 12-inch 2-connector Part #: 5795-12653-12 Condition: New
2-connector ribbon cable with 34 pins per connector, 12-inch overall length. Used between MPU board and score display... more
More Info | Related Items | Order
|
$8.95 each
(1 Available)
Order
|
| Ribbon Cable - 34-pin 17-inch 3-connector Part #: 5795-12837-02 Condition: New
3-connector ribbon cable with 34 pins per connector, 17 inch overall length. Used on Williams Slugfest baseball game.... more
More Info | Related Items
|
$13.95 each
Call or e-mail |
| Ribbon Cable - 14-pin 30-inch 2-connector Part #: 5795-12838-30 Condition: New
2-connector ribbon cable with 14 pins per connector, 30-inch overall length. Used between boards in backbox and score display... more
More Info | Related Items | Order
|
$10.39 each
(2 Available)
Order
|
| Ribbon Cable - 34-pin 23.5-inch 4-connector Part #: 5795-13018-01 Condition: New
4-connector ribbon cable with 34 pins per connector, 23-1/2 inch overall length. Used on most Bally/Williams WPC pinball games.... more
More Info | Related Items
|
$15.60 each
Temporarily out. Please check back. more info...
|
| Ribbon Cable - 40-pin 12-inch 2-connector Part #: 5795-16308-12 Condition: New
2-connector ribbon cable with 40 pins per connector, 12 inches overall length. Used on some Bally, Williams, Midway games. Has... more
More Info | Related Items
|
$12.00 each
Discontinued more info...
|
| DeoxIT Anti-Oxidant Compound D100L Part #: D100L Condition: New
Great for improving connections. It's what we use! We use DeoxIT anti-oxidant compound in our shop all the time on all... more
More Info | Related Items | Order
|
$5.95 each
Order
|
Need a cable not listed here? Just e-mail us with game name, cable description (if possible: cable length, number of connections, number of pins per connector). We may have it or can get it!
Transformers:
| Transformer (Bally/Williams) WPC-89 Pinball Games Part #: 5610-12835-00 Condition: New
Main power transformer used in Bally & Williams WPC-89 pinball games from approx. 1990-1994.
More Info | Related Items
|
Currently Unavailable more info...
|
| Transformer (Midway) Arcade Video Games Part #: 5610-13326-00 Condition: New
Main power transformer used in some later-model Midway arcade video games. 115v/230v 60/50Hz, with leads and connectors.
More Info | Related Items
|
Currently Unavailable more info...
|
| Transformer- Williams 50v Flipper Power w/ Wiring Harness (USED) Part #: TRANS50V Condition: Used
Transformer and wiring harness for 50-volt flipper power, as used in several mid-1980s Williams games including Space... more
More Info | Related Items
|
Currently Unavailable more info...
|
Transistors, MOSFETs, SCRs:
Listed alphabetically/numerically by part number.
| Small Signal Surface-Mount MOSFET Part #: BSS123 Condition: New
Miniature surface-mount MOSFET used on late-model Stern Pinball games for devices such as opto switches used on drop target PC... more
More Info | Related Items | Order
|
$0.25 each
Order
|
| LM7905CT Negative 5V Voltage Regulator Transistor Part #: LM7905CT Condition: New
Negative 5 volt DC (-5vdc) regulator transistor. 3 terminals, TO-220 case. Interchanges with UA7905UC, SG7905CP. Replaces... more
More Info | Related Items | Order
|
$1.59 each
Order
|
| MJE340 Transistor Part #: MJE340 Condition: New
High-voltage transistor for Data East score display power. MJE340 is the NPN companion to the ... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| MJE350 Transistor Part #: MJE350 Condition: New
High-voltage transistor for Data East score display power. MJE350 is the PNP companion to the ... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| MJE15030 Transistor Part #: MJE15030 Condition: New
Replacement high-voltage transistor for Williams score display power. Direct replacement for games from the mid-to-late 1980s,... more
More Info | Related Items | Order
|
$2.49 each
Order
|
| MJE15031 Transistor Part #: MJE15031 Condition: New
Replacement high-voltage transistor for Williams score display power. Direct replacement for games from the mid-to-late 1980s,... more
More Info | Related Items | Order
|
$2.49 each
Order
|
| MPSA13 Transistor Part #: MPSA13 Condition: New
NPN transistor. TO-92 case. 30v 500ma. Used on cpu and driver boards in some games. Replaces MPS-A13, Gottlieb XO304. Used on... more
More Info | Related Items | Order
|
$0.69 each
Order
|
| MPSA42 Transistor Part #: MPSA42 Condition: New
NPN pre-driver transistor often used for high voltage applications such as display units and power supply circuits. Use as... more
More Info | Related Items | Order
|
$0.50 each
Order
|
| MPSA92 Transistor Part #: MPSA92 Condition: New
OBSOLETE - use 2N5401 as replacement.
PNP pre-driver transistor often used for high... more
More Info | Related Items
|
$0.50 each
Discontinued more info...
|
| MPSD02 Transistor Part #: MPSD02 Condition: New
OBSOLETE - Use MPSA42 as replacement.
Used as Q4 transistor in display high voltage... more
More Info | Related Items
|
$0.50 each
Discontinued more info...
|
| MPSD52 Transistor Part #: MPSD52 Condition: New
OBSOLETE - Use 2N5401 as replacement.
Used as Q2 transistor in display high voltage... more
More Info | Related Items
|
$0.50 each
Discontinued more info...
|
| MPSU45 Transistor Part #: MPSU45 Condition: New
2 amp NPN Darlington transistor used in many Gottlieb System 80 games. Replaces MPS-U45, Gottlieb #s XO-146, XO-306, CEN-U45,... more
More Info | Related Items | Order
|
$3.95 each
(3 Available)
Order
|
| SDS201 Transistor Part #: SDS201 Condition: New
OBSOLETE - Use MJE15030 with modifications described... more
More Info | Related Items
|
Discontinued more info...
|
| SDS202 Transistor Part #: SDS202 Condition: New
OBSOLETE - Use MJE15031 with modifications described... more
More Info | Related Items
|
Discontinued more info...
|
| TIP31C Transistor Part #: TIP31C Condition: New
NPN driver transistor. Max. ratings: 100vdc, 3 amps, 40 watts. Used on many makes/models of electronic solid-state (SS) pinball... more
More Info | Related Items | Order
|
$1.20 each
(27 Available)
Order
|
| TIP32C Transistor Part #: TIP32C Condition: New
PNP driver transistor used in many pinball applications. Max. ratings: 100vdc, 3 amps, 40 watts.
More Info | Related Items | Order
|
$1.20 each
Order
|
| TIP36C Transistor Part #: TIP36C Condition: New
PNP bipolar power transistor, TO-218 (SOT-93, TO-3P) case. Rated at 100v, 25a. Large, heavy-duty transistor for use on many... more
More Info | Related Items | Order
|
$2.95 each
Order
|
| TIP42C Transistor Part #: TIP42C Condition: New
Replaces standard TIP42. PNP driver transistor used in most lamp matrix driver circuitry. Max. ratings: 100vdc, 6 amps.... more
More Info | Related Items | Order
|
$1.20 each
Order
|
| TIP102 Transistor Part #: TIP102 Condition: New
NPN driver transistor as used for many solenoid, flashlamp, and flipper devices in several makes/models of games- old and new.... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| TIP107 Transistor Part #: TIP107 Condition: New
PNP Darlington driver transistor. Commonly used in lamp matrix driver circuitry for driving lamp columns/rows in Williams,... more
More Info | Related Items | Order
|
$1.20 each
Order
|
| TIP115 Transistor Part #: TIP115 Condition: New
Darlington PNP driver transistor. Typically used for switching pop bumper and slingshot bumper circuits in Bally/Midway... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| TIP120 Transistor Part #: TIP120 Condition: New
Darlington NPN driver transistor as used for many solenoid, flashlamp, flipper devices. Mostly used on older (early)... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| TIP122 Transistor Part #: TIP122 Condition: New
NPN driver transistor as used for many solenoid, flashlamp, flipper devices. Can be used in older games with lower coil... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| TIP145 Transistor Part #: TIP145 Condition: New
OBSOLETE - Use TIP147G as replacement.
PNP bipolar Darlington switching transistor,... more
More Info | Related Items
|
Discontinued more info...
|
| TIP146 Transistor Part #: TIP146 Condition: New
OBSOLETE - Use TIP147G as replacement.
PNP bipolar Darlington switching transistor,... more
More Info | Related Items
|
Discontinued more info...
|
| TIP147G Transistor Part #: TIP147G Condition: New
Coil driver transistor used in several home-model pinball games made in late 1970s. Replaces original TIP147. PNP bipolar... more
More Info | Related Items | Order
|
$3.82 each
Order
|
| P20N10L MOSFET Solenoid Driver Part #: P20N10L Condition: New
DISCONTINUED- use P24NF10 as replacement.
Replacement for 20N10L MOSFET and similar... more
More Info | Related Items
|
Discontinued more info...
|
| P24NF10 MOSFET Solenoid Driver Part #: P24NF10 Condition: New
Replacement for 20N10L MOSFETs and similar others (see part number list below). Coil and flashlamp driver N-channel Mosfet used... more
More Info | Related Items | Order
|
$2.75 each
Order
|
| 2N3055 Transistor Part #: 2N3055 Condition: New
Heavy duty switching transistor as used on solenoid driver board in Gottlieb System 1 and System 80 pinball games. TO-3 case,... more
More Info | Related Items | Order
|
$3.95 each
Order
|
| 2N3584 Transistor Part #: 2N3584 Condition: New
High voltage regulator transistor for display power in solid-state (SS) Bally and Stern pinball games, 1977-1985. Replaces... more
More Info | Related Items | Order
|
$7.61 each
(3 Available)
Order
|
| 2N3792 Transistor Part #: 2N3792 Condition: New
Bipolar PNP switching transistor, TO-3 case. Can be used to replace obsolete transistor # 2N5875 in Gottlieb games. Rated 80v,... more
More Info | Related Items | Order
|
$6.95 each
(7 Available)
Order
|
| 2N3904 Transistor Part #: 2N3904 Condition: New
Common-use transistor in many pinball games. NPN transistor, rated at 200ma, 40v. Used for switch column drives in Williams... more
More Info | Related Items | Order
|
$0.50 each
Order
|
| 2N3906 Transistor Part #: 2N3906 Condition: New
Common-use transistor in many pinball games. PNP transistor, rated at 200mA, 40v.
More Info | Related Items | Order
|
$0.50 each
Order
|
| 2N4401 Transistor Part #: 2N4401 Condition: New
PNP pre-driver transistor often used in conjunction with TIP102, ... more
More Info | Related Items | Order
|
$0.50 each
Order
|
| 2N4403 Transistor Part #: 2N4403 Condition: New
PNP pre-driver transistor often used in conjunction with TIP102, ... more
More Info | Related Items | Order
|
$0.50 each
Order
|
| 2N5060 Lamp Driver SCR Part #: 2N5060 Condition: New
DISCONTINUED / OBSOLETE - Use # 2N5061 as replacement.
SCR (silicon controlled... more
More Info | Related Items
|
$0.90 each
Discontinued more info...
|
| 2N5061 Lamp Driver SCR Part #: 2N5061 Condition: New
SCR (silicon controlled rectifier) as used on early Bally and Stern electronic solid-state (SS) pinballs (1977-1985). Type... more
More Info | Related Items | Order
|
$0.49 each
(21 Available)
Order
|
| 2N5401 Transistor Part #: 2N5401 Condition: New
PNP pre-driver transistor often used for high voltage applications such as display units and display power supply circuits.... more
More Info | Related Items | Order
|
$0.50 each
Order
|
| 2N5550 Transistor Part #: 2N5550 Condition: New
High voltage bipolar transistor. NPN transistor rated at 160 volts, 600mA. TO-92 case. Used on many MPU and driver boards in... more
More Info | Related Items | Order
|
$0.69 each
Order
|
| 2N5551 Transistor Part #: 2N5551 Condition: New
High voltage transistor as used in score display power circuitry on power supply in many Data East games. NPN transistor rated... more
More Info | Related Items | Order
|
$0.89 each
Order
|
| 2N5875 Transistor Part #: 2N5875 Condition: New
DISCONTINUED/OBSOLETE - can use 2N3792 as replacement in most applications.
Bipolar... more
More Info | Related Items
|
Discontinued more info...
|
| 2N5878 Transistor Part #: 2N5878 Condition: New
Transistor, TO-3 case.
More Info | Related Items | Order
|
$4.85 each
Order
|
| 2N6122 Transistor Part #: 2N6122 Condition: New
OBSOLETE - Use # TIP31C as replacement.
More Info | Related Items
|
Discontinued more info...
|
| 2N6427 Transistor Part #: 2N6427 Condition: New
NPN transistor used in many pinball machines for driving switch matrix lines and small lamps on gadgets/devices, as well as... more
More Info | Related Items | Order
|
$0.59 each
Order
|
| 2N6532 Transistor Part #: 2N6532 Condition: New
OBSOLETE - Use # TIP122 as replacement.
More Info | Related Items
|
Discontinued more info...
|
| MCR106 Lamp Driver SCR Part #: MCR106 Condition: New
Thyristor SCR (silicon controlled rectifier) as used on early Bally and Stern electronic solid-state (SS) pinballs (1977-1985).... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| VN02N Lamp Column Driver Part #: VN02N Condition: New
Solid state lamp driver unit as used on Sega and modern Stern Pinball games (Whitestar CPU system). Looks similar to a TO-220... more
More Info | Related Items | Order
|
$5.95 each
Order
|
Triacs:
| BT138-600E Lamp Driver Triac Part #: BT138-600E Condition: New
Lamp driver rail triac in TO-220 case. Used on Bally / Williams WPC power/driver boards (5 used per board). These triacs... more
More Info | Related Items | Order
|
$2.95 each
Order
|
Fuses, Circuit Breakers, & Accessories:
|
FUSE TECH TIP:
Most replacement fuses we sell have a maximum voltage rating of 250 volts. These will replace older fuses with lower maximum voltage ratings in all pinball applications. For example, a 250 volt fuse can be used to replace a 32 volt fuse. This applies to pinball machine applications- other non-pinball applications may require a specific voltage rating on fuses.
The critical value on replacement fuses in pinball applications is the current, or "amperage" rating. Always use fuses with an amperage rating that is equal to the recommended rating as specified by your game's operation manual or schematic diagram, or by the label on the board or elsewhere in your game.
DO NOT OVERFUSE! Never install a fuse with a higher amperage rating than what your game calls for. For example, a 10 amp fuse should never be used to replace an 8 amp fuse. It is okay to use a fuse with a lower amperage rating, but using one that is too low may cause the fuse to blow unnecessarily.
Always use the correct type fuse for your application. For example, never use a slow-blow fuse in place of a fast-blow fuse, and vice-versa.
All electronic repair components we sell are sold with the assumption that you "know what you're doing". We are not responsible for any damage resulting from improper handling/installation. If you are uncomfortable replacing components or have any doubts/questions, we recommend enlisting the help of a professional. See our Game Service & Repair page for information on finding help in your area.
|
| Circuit Breaker Testing Set (6pcs) Part #: CBSET Condition: New
Save fuses and money! This handy set of 4 resettable circuit breakers and 2 clip-on test leads allows you to connect a... more
More Info | Related Items
|
$24.99 set
Temporarily out. Please check back. more info...
|
| Fuse Puller Tool - For Glass Fuses Part #: FPT1 Condition: New
Handy fuse puller tool for use with large and small diameter glass fuses as used in most all pinball games- old and new. Works... more
More Info | Related Items | Order
|
$3.99 each
(23 Available)
Order
|
| Fuses and Fuse Kits:
Kits listed below contain 12 fuses each, and include most or all of the most common replacement fuses for the types of games shown.
- Click the Order link for any fuse kit to see a list of games that kit is used in.
- Click the Contents link for any fuse kit to see what comes in the kit.
- Click the Notes link for any fuse kit to see any specific notes for that kit.
Fuse Kit Disclaimer: Kits we sell include a selection of common fuses used in most games of the same type/era. Some games had different designs which may have required additional or different fuses, so kits we sell may not include all possible fuses for all possible designs/variations of all games. See our Fuse Kit Contents page for a listing of what fuses come in each kit, to verify that you are ordering what you need. You can order additional/separate fuses individually, below, if needed.
Fuse Kits:
Game |
Price |
Part # |
Contents |
Order |
Atari Games (1977-1984)
| $10.60 | FKATARI
| Contents
| Order |
Bally Electro-Mechanical Games (pre-1978)
| $7.40 | FKBLYEM
| Contents
| Order
|
Bally Solid-State (1977-1985)
| $8.50 | FKBLYSS
| Contents Notes
| Order
|
Bally/Midway 6803 Games (1985-1989)
| $9.40 | FKBLY6803
| Contents
| Order
|
Data East (1987-1994)
| $10.60 | FKDE
| Contents
| Order
|
Game Plan (All)
| $8.90 | FKGPN
| Contents
| Order
|
Gottlieb Electro-Mechanical Games (pre-1978)
| $8.60 | FKGTBEM
| Contents
| Order
|
Gottlieb Solid-State Games (1977-1994)
| $9.70 | FKGTBSS
| Contents
| Order
|
Sega Pinball (1994-1998)
| $10.68 | FKSEGSS
| Contents
| Order
|
Stern Solid-State (1977-1985)
| $8.50 | FKSTNSS
| Contents Notes
| Order
|
Stern Pinball (1998-present)
| $10.68 | FKSEGSS
| Contents
| Order
|
Williams Electro-Mechanical (pre-1978)
| $7.60 | FKWMSEM
| Contents
| Order
|
Williams L3-L7 (1977-1984)
| $9.60 | FKWMSL3L7
| Contents
| Order
|
Williams System 9, 11 (1985-1990)
| $10.05 | FKWMSSYS9
| Contents
| Order
|
Bally/Williams WPC (1990-1995)
| $9.80 | FKWPC
| Contents
| Order
|
Bally/Williams WPC-95 (1995-1999)
| $14.62 | FKWPC95
| Contents
| Order
|
Individual Fuses:
1/4" x 1-1/4" Glass Fuses:
Fuses listed below are AGC (fast-acting) and MDL (slow-blow) standard glass fuses- 1/4" x 1-1/4" in size. As used in most all pinball games. The most common pinball game type fuses are listed below. If you need a fuse not listed below, e-mail us- we may have, or be able to get it!
AGC Fast-Acting Fuses |
MDL Slow-Blow Fuses |
Amperage |
Max. Voltage |
Part # |
Price |
Order |
1/4 | 250
| FUSE1/4A
| $0.50 | Order
|
3/4 | 250
| FUSE3/4A
| $0.60 | Order
|
4 | 250
| FUSE4A
| $0.50 | Order
|
5 | 250
| FUSE5A
| $0.50 | Order
|
8 | 250
| FUSE8A
| $0.50 | Order
|
10 | 250
| FUSE10A
| $0.50 | Order
|
15 | 250
| FUSE15A
| $0.60 | Order
|
20 | 250
| FUSE20A
| $0.60 | Order
|
|
Amperage |
Max. Voltage |
Part # |
Price |
Order |
1/8 | 250
| FUSE1/8ASB
| $1.05 | Order
|
1/4 | 250
| FUSE1/4ASB
| $0.80 | Order
|
3/8 | 250
| FUSE3/8ASB
| $0.80 | Order
|
1/2 | 250
| FUSE1/2ASB
| $0.80 | Order
|
3/4 (8/10 amp) | 250
| FUSE3/4ASB
| $0.88 | Order
|
1 | 250
| FUSE1ASB
| $0.80 | Order
|
2 | 250
| FUSE2ASB
| $0.80 | Order
|
2-1/2 | 250
| FUSE2.5ASB
| $0.80 | Order
|
3 | 250
| FUSE3ASB
| $0.80 | Order
|
4 | 250
| FUSE4ASB
| $0.80 | Order
|
5 | 250
| FUSE5ASB
| $0.80 | Order
|
6 | 250
| FUSE6ASB
| $0.80 | Order
|
7 | 250
| FUSE7ASB
| $0.80 | Order
|
8 | 250
| FUSE8ASB
| $0.80 | Order
|
10 | 250
| FUSE10ASB
| $0.80 | Order
|
15 | 250
| FUSE15ASB
| $0.80 | Order
|
|
5mm x 20mm Glass Fuses:
Miniature glass fuses- 5mm x 20mm in size. Also known as "GMA" or "Bussman" fuses. As used in late-model Bally/Williams pinball games, and many types of late-model monitors, power supplies, and other electronic devices.
Fast-Acting Fuses |
Slow-Blow Fuses |
Amperage |
Max. Voltage |
Part # |
Price |
Order |
0.315 (315mA) | 250
| FUSET0.315A
| $0.60 | Order
|
0.630 (630mA) | 250
| FUSET0.630A
| $0.60 | Order
|
2.5 | 250
| FUSET2.5A
| $0.60 | Order
|
4.0 | 250
| FUSET4.0A
| $0.60 | Order
|
5.0 | 250
| FUSET5.0A
| $0.60 | Order
|
6.3 | 250
| FUSET6.3A
| $0.60 | Order
|
|
Amperage |
Max. Voltage |
Part # |
Price |
Order |
0.315 (315mA) | 250
| FUSET0.315ASB
| $1.31 | Order
|
0.630 (630mA) | 250
| FUSET0.630ASB
| $1.20 | Order
|
4.0 | 250
| FUSET4.0ASB
| $1.20 | Order
|
5.0 | 250
| FUSET5.0ASB
| $1.20 | Order
|
6.3 | 250
| FUSET6.3ASB
| $1.20 | Order
|
|
Specialty Fuses:
Unique type fuses for special applications.
Specialty Fuses: |
Amperage |
Type |
Max. Voltage |
Part #: |
Price |
Order |
Notes |
3/16 | AGX fast-blow | 250 | FUSE3/16AGX | $1.90 ea. | - DISCONTINUED - Obsolete Use 1/4A AGX instead | Short fuse used for display high voltage in Bally & Stern games (located on solenoid board or back of insert door). |
1/4 | AGX fast-blow | 250
| FUSE1/4AGX
| $1.95 | Order
| Short fuse used for display high voltage in Bally games (located on solenoid/regulator board).
|
|
|
| Fuse Holder for 1/4 x 1-1/4 Fuses- Solder Lug Type Part #: FUSEHLDR1 Condition: New
Replacement fuse holder for standard glass 3AG, AGC, MDL type fuses measuring 1/4 x 1-1/4 inch (7mm x 32mm), fast-acting or... more
More Info | Related Items | Order
|
$1.75 each
Order
|
| Fuse Holder for 1/4 x 1-1/4 Fuses- PCB Mount Type Part #: FUSEHLDR2 Condition: New
Replacement fuse holder for standard glass 3AG, AGC, MDL type fuses measuring 1/4" x 1-1/4" (7mm x 32mm), fast-acting or... more
More Info | Related Items | Order
|
$1.79 each
Order
|
| Fuse Holder for 5mm x 20mm Fuses- PCB Mount Type Part #: FUSEHLDR3 Condition: New
Replacement fuse holder for 5mm x 20mm glass fuses, fast-acting or slow-blow. Rated at 6.3 amps, 250 volts maximum. PCB mount... more
More Info | Related Items | Order
|
$1.85 each
Order
|
| Fuse Holder for 1/4 x 1-1/4 Fuses- Push/Twist Panel Mount Type Part #: FUSEHLDR4 Condition: New
Replacement fuse holder for standard glass 3AG, AGC, MDL type fuses measuring 1/4 x 1-1/4 inch (7mm x 32mm), fast-acting or... more
More Info | Related Items | Order
|
$4.95 each
Order
|
| Fuse Holder, Twist-In Style - for 5mm x 20mm Fuses Part #: 5733-12869-00 Condition: New
Twist-in fuse holder for small 5mm x 20mm fuses, as used in later-model Bally and Williams games. Typically used for main line... more
More Info | Related Items | Order
|
$3.95 each
(1 Available)
Order
|
| Fuse Clips for 1/4 x 1-1/4 Fuses - PCB Mount Part #: FUSECLIP Condition: New
Replacement fuse clips for standard size 1/4 x 1-1/4-inch glass fuses, fast-acting or slow-blow. PC board mount type. Original... more
More Info | Related Items | Order
|
$0.25 each
(86 Available)
Order
|
Standoffs (Spacers) - Circuit Board Mounting:
| Power Supply Shield Holder - Bally Games Part #: M-1829-3 Condition: New
Nylon standoff / holder for the clear plastic protective shield that mounts over the top of the power supply (fuse/rectifier... more
More Info | Related Items | Order
|
$0.99 each
(15 Available)
Order
|
Switches:
Important note on switch polarity:
Some switches listed below may require the use of a diode in certain games. Such switches will be required to be connected properly in your game, with respect to diode orientation, otherwise improper operation may occur. Always be sure to observe proper polarity of switch leads, diode, and connecting switch wires when replacing any switch in your game. Make a note of wire color, connectivity, and diode orientation before removing your old switch, to avoid confusion!
| DeoxIT Anti-Oxidant Compound D100L Part #: D100L Condition: New
Great for improving connections. It's what we use! We use DeoxIT anti-oxidant compound in our shop all the time on all... more
More Info | Related Items | Order
|
$5.95 each
Order
|
| Power Switch - Rocker Type Part #: WRG-32F2 Condition: New
Main power switch used for many late-model pinball games and other video/arcade games. Cherry brand rocker switch w/ 2... more
More Info | Related Items | Order
|
$4.95 each
Order
|
| Power Switch - Toggle Part #: 2GK50-73 Condition: New
Main power on/off switch, as used on most makes and models of pinball and video games- old and new. Heavy-duty double-pole,... more
More Info | Related Items | Order
|
$10.23 each
Order
|
| Power Switch - Pushbutton On/Off w/ Black Knob Part #: GSW-21 Condition: New
Main power on/off switch. Pushbutton type with black knob- push on, push off. Similar type as used on some early solid-state... more
More Info | Related Items | Order
|
$8.95 each
Order
|
| Power Switch - Pushbutton On/Off w/ Metal Knob Part #: GSW-24 Condition: New
Main power on/off switch. Pushbutton type with metal push-knob- push on, push off. Similar type as used on some early... more
More Info | Related Items | Order
|
$6.49 each
Order
|
| DIP Switch Bank - 8 Position Part #: DIPSW8 Condition: New
8-position DIP switch bank. As used on many MPU boards in electronic pinball games and video games mid-1970s and up. Each... more
More Info | Related Items | Order
|
$2.40 each
Order
|
| Leaf Switch - Standard/Universal Part #: 7618 Condition: New
Universal leaf switch assembly. Multiple uses including rollover switches, start buttons, fire buttons and joysticks in early... more
More Info | Related Items | Order
|
$3.50 each
Order
|
| Score Reel Wiper Contact (Gottlieb) Part #: A-7516 Condition: New
Brass wiper contact as used on score reels in many Gottlieb electro-mechanical (EM) games. Discontinued part- no longer being... more
More Info | Related Items | Order
|
$7.95 each
Order
|
| Small Leaf Switch, Normally Closed (Gottlieb) Part #: A-7564 Condition: New
Small leaf switch used in some Gottlieb electro-mechanical (EM) games. Possibly used for score-reel runout switch. Measures... more
More Info | Related Items
|
$5.95 each
Currently Unavailable more info...
|
| Leaf Switch Actuator Blade (Gottlieb) Part #: A-8306 Condition: New
Single actuator blade for switch stack with 'bump' on end. Measures 2-11/16-inches (69mm) overall length, 3/8-inch (10mm)... more
More Info | Related Items | Order
|
$4.95 each
Order
|
| Playfield Tilt Switch w/ Bracket (Gottlieb) Part #: B-9141 Condition: New
Weighted switch with mounting bracket for use in tilt circuit. Typically mounted on underside of playfield but can be installed... more
More Info | Related Items | Order
|
$8.95 each
Order
|
| Flipper End-of-Stroke Switch - Williams Games 1980-1992 Part #: 03-7811 Condition: New
Flipper EOS switch with normally-closed heavy-duty tungsten contact points for older games that use higher voltage/current... more
More Info | Related Items | Order
|
$3.50 each
Order
|
| Flipper End-of-Stroke Switch, Secondary - Dual Flippers (Bally) Part #: ASW-A10-45 Condition: New
Secondary (outer) normally-open-contact flipper EOS switch for use on double-stack EOS switch assemblies on some Bally... more
More Info | Related Items | Order
|
$9.95 each
(1 Available)
Order
|
| Flipper End-of-Stroke Switch w/Lifter, Right- Normally Closed (Bally) Part #: ASW-A20-12 Condition: New
DISCONTINUED/OBSOLETE PART - no replacements currently available. Listed for reference only.
Normally-closed EOS switch... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Flipper End-of-Stroke Switch w/Lifter, Left- Normally Closed (Bally) Part #: ASW-A20-13 Condition: New
DISCONTINUED/OBSOLETE PART - no replacements currently available. Listed for reference only.
Normally-closed EOS switch... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Flipper End-of-Stroke Switch w/Lifter- Normally Closed (Bally) Part #: ASW-A20-34 Condition: New
3-leaf flipper EOS switch with nylon spacer/lifter. Normally-closed contacts. Used on many later solid-state Bally games, and... more
More Info | Related Items | Order
|
$9.95 each
(8 Available)
Order
|
| Flipper End-of-Stroke Switch, Right (Bally) Part #: ASW-A20-36 Condition: New
DISCONTINUED/OBSOLETE PART - use # 03-7811 as replacement.
Flipper EOS switch used on... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Flipper End-of-Stroke Switch, Left (Bally) Part #: ASW-A20-37 Condition: New
DISCONTINUED/OBSOLETE PART - use # 03-7811 as replacement.
Flipper EOS switch used on... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Dual Flipper End-of-Stroke Switch (Bally) Part #: A365-00046-0000 Condition: New
Dual flipper EOS switch with heavy-duty tungsten contact points. Used on Bally/Midway games that have 2 flippers on one side of... more
More Info | Related Items | Order
|
$19.90 each
(1 Available)
Order
|
| Cabinet Flipper Button Switch (Gottlieb) Part #: B-12642 Condition: New
Standard single-contact flipper button leaf switch replacement unit with heavy-duty contacts for high-voltage/high-current... more
More Info | Related Items | Order
|
$8.95 each
(5 Available)
Order
|
| Cabinet Flipper Button Switch (Gottlieb) Part #: B-17838 Condition: New
Standard single-contact flipper button leaf switch replacement unit with heavy-duty contacts for high-voltage/high-current... more
More Info | Related Items | Order
|
$6.75 each
Order
|
| Leaf Switch- 3-Lug, Slingshot Bumper / Rebound (Bally/Williams) Part #: SW-1A-120 Condition: New
3-blade leaf switch commonly used in electronic solid-state (SS) pinball games on slingshot bumpers and for rebound scoring... more
More Info | Related Items | Order
|
$4.25 each
(11 Available)
Order
|
| Leaf Switch - Eject Hole / Kickout (Williams) Part #: SW-1A-130 Condition: New
Leaf switch with nylon actuator as used for some eject holes and ball trough kickouts on many Williams electronic solid-state... more
More Info | Related Items | Order
|
$7.50 each
(4 Available)
Order
|
| Flipper Lane-Change / Enter Initials Switch Assembly (Williams) Part #: SW-1A-150 Condition: New
Replacement switch assembly for lane-change feature and/or high score enter initials feature, as used in many Williams... more
More Info | Related Items | Order
|
$7.50 each
(16 Available)
Order
|
| Vertical Up-Kicker Ball Leaf Switch Assembly (Bally/Williams) Part #: SW-1A-167 Condition: New
Ball detector switch assembly as used on some vertical up-kickers, or ball poppers, in some late 1980s and early 1990s Bally &... more
More Info | Related Items | Order
|
$10.49 each
(4 Available)
Order
|
| Flipper End-of-Stroke Switch - Bally/Williams Games (Late) Part #: SW-1A-194 Condition: New
Low-voltage flipper EOS switch for later-model Bally and Williams games that use the Fliptronics flipper control system... more
More Info | Related Items | Order
|
$4.50 each
Order
|
| Leaf Contact Switch - Joystick / Buttons (Midway) Part #: A932-00009-0000 Condition: New
Leaf switch with actuator blade and nylon spacer with 2 solder lugs. As used on many Midway arcade video games for joystick and... more
More Info | Related Items
|
$7.50 each
Currently Unavailable more info...
|
| Rollover Switch Actuator, Left - Shuffle Games (Williams / United) Part #: 12-6470-L Condition: New
Left-hand rollover switch actuator wireform as used on many United and Williams shuffle alley games.
More Info | Related Items | Order
|
$5.95 each
Order
|
| Rollover Switch Actuator, Right - Shuffle Games (Williams / United) Part #: 12-6470-R Condition: New
Right-hand rollover switch actuator wireform as used on many United and Williams shuffle alley games.
More Info | Related Items
|
$5.95 each
Call or e-mail |
| Coin Switch with Trip Wireform - UL/LR Mounting Part #: 42-1075-00 Condition: New
Large microswitch with 3-inch straight trip/actuator wire. Screw mounting holes in upper left (UL) and lower right (LR) of... more
More Info | Related Items | Order
|
$6.50 each
(18 Available)
Order
|
| Coin Switch with Trip Wireform - LL/UR Mounting Part #: 42-1351-00 Condition: New
Large microswitch with 3-inch straight trip/actuator wire. Screw mounting holes in lower left (LL) and upper right (UR) of... more
More Info | Related Items | Order
|
$6.50 each
(12 Available)
Order
|
| Microswitch Assembly (Data East / Sega) Part #: 180-5118-00 Condition: New
Microswitch assembly with blade actuator used in ball trough in some Data East and Sega games. Also replaces # 500-5683-00,... more
More Info | Related Items | Order
|
$8.85 each
(8 Available)
Order
|
| Flipper End-of-Stroke Switch w/Bend - Data East / Sega / Stern Part #: 180-5124-01 Condition: New
Used on Data East, Sega, and some early modern Stern Pinball games. Flipper EOS (end-of-stroke) switch with bend on end of long... more
More Info | Related Items | Order
|
$4.99 each
Order
|
| Coin Door Interlock Switch - 2 Circuit Part #: 180-5136-00 Condition: New
Used on most later-model games. Push-pull operation, and pull-out to lock. Double pole contacts (2 sets for 2 circuits).... more
More Info | Related Items | Order
|
$6.95 each
Order
|
| Flipper End-of-Stroke Switch (Stern) Part #: 180-5149-00 Condition: New
Used on modern late-model Stern Pinball games. Flipper EOS (end-of-stroke) switch. Overall length of this switch assembly is... more
More Info | Related Items | Order
|
$3.99 each
(34 Available)
Order
|
| Flipper Lane-Change / Enter Initials Switch Assembly (Williams) Part #: SW-1A-150 Condition: New
Replacement switch assembly for lane-change feature and/or high score enter initials feature, as used in many Williams... more
More Info | Related Items | Order
|
$7.50 each
(16 Available)
Order
|
| Drop Target Bank Switch w/ Insulator & Diode Part #: 180-5025-01 Condition: New
Used on Data East, Sega, and possibly some modern Stern Pinball games. Used on drop target banks to detect fallen (down)... more
More Info | Related Items
|
$9.95 each
Currently Unavailable more info...
|
| Switch- Leaf, Lane-Change (Data East) Part #: 180-5026-00 Condition: New
Leaf switch with nylon insulator/spacer used on flipper assemblies in early Data East games for lane-change feature. Uses ... more
More Info | Related Items | Order
|
$6.59 each
Order
|
| Switch- Leaf, Drop Target (Data East / Sega / Stern) Part #: 180-5104-00 Condition: New
Used on Data East, Sega, and possibly some late-model Stern Pinball games. Used on drop target banks to detect fallen (down)... more
More Info | Related Items
|
$10.35 each
Temporarily out. Please check back. more info...
|
| Vertical Up-Kicker Ball Leaf Switch Assembly (Bally/Williams) Part #: A-11657 Condition: New
Ball detector switch assembly as used on some vertical up-kickers, or ball poppers, in some early 1990s Bally & Williams games.... more
More Info | Related Items | Order
|
$11.74 each
(4 Available)
Order
|
| Spinner / Ball Gate Leaf Switch Assembly (Bally/Williams) Part #: A-11664 Condition: New
Switch assembly used with spinning targets and ball roll-under wireforms on many makes & models. Replaces Bally/Williams #s... more
More Info | Related Items
|
$9.95 each
Currently Unavailable more info...
|
| Spinner / Rollunder Leaf Switch (Gottlieb) Part #: B-18807 Condition: New
Leaf switch assembly with bend/hook on end for use with spinner targets and roll-under wireform gates on many Gottlieb games.... more
More Info | Related Items
|
$12.94 each
Temporarily out. Please check back. more info...
|
| Slingshot Bumper Leaf Switch (Data East/Sega/Stern) Part #: 180-5054-00 Condition: New
Replacement vertically-mounted switch for slingshot bumpers. Direct replacement for Data East, Sega, and new Stern games (part... more
More Info | Related Items | Order
|
$7.13 each
(3 Available)
Order
|
| Leaf Switch- 3-Lug, Slingshot Bumper / Rebound (Bally/Williams) Part #: SW-1A-120 Condition: New
3-blade leaf switch commonly used in electronic solid-state (SS) pinball games on slingshot bumpers and for rebound scoring... more
More Info | Related Items | Order
|
$4.25 each
(11 Available)
Order
|
| Leaf Switch - Eject Hole / Kickout (Williams) Part #: SW-1A-130 Condition: New
Leaf switch with nylon actuator as used for some eject holes and ball trough kickouts on many Williams electronic solid-state... more
More Info | Related Items | Order
|
$7.50 each
(4 Available)
Order
|
| Flipper End-of-Stroke Switch - Williams Games (Early) Part #: SW-10A-8 Condition: New
Flipper EOS switch used on older Williams games approx. 1965-1979. Can also be used as replacement on some other makes/models... more
More Info | Related Items | Order
|
$5.25 each
(27 Available)
Order
|
| Flipper Button Switch, Single Contact, High Voltage (Bally/Williams) Part #: SW-10A-48 Condition: New
Single-contact flipper button leaf switch assembly with heavy-duty contacts. Direct replacement for Bally/Williams part #... more
More Info | Related Items | Order
|
$5.95 each
(33 Available)
Order
|
| Flipper Button Switch, Dual Contact, High Voltage (Bally/Williams) Part #: SW-1010A-13 Condition: New
Dual-contact flipper button leaf switch assembly with heavy-duty contacts. Direct replacement for Bally/Williams part #... more
More Info | Related Items | Order
|
$11.95 each
(16 Available)
Order
|
| Cabinet Flipper Button Switch (Bally/Stern) Part #: ASW-A10-41 Condition: New
Standard single-contact flipper button leaf switch replacement unit with heavy-duty contacts for high-voltage/high-current... more
More Info | Related Items | Order
|
$9.45 each
(33 Available)
Order
|
| Flipper Button Switch, Single Contact, Low Voltage (Stern) Part #: 500-6889-01 Condition: New
Flipper button leaf switch assembly with low-voltage/low-current contacts and attached disc capacitor. Direct replacement for... more
More Info | Related Items | Order
|
$11.95 each
(5 Available)
Order
|
| Flipper Button Switch, Dual Contact, Low Voltage (Stern) Part #: 500-6890-01 Condition: New
Flipper button leaf switch assembly with low-voltage/low-current contacts. Dual-contact switch for use on games that have 2... more
More Info | Related Items | Order
|
$24.05 each
(2 Available)
Order
|
| Pop Bumper Switch Stack Assembly - Right Mount (Data East/Sega/Stern) Part #: 515-6459-09R Condition: New
Complete switch assembly with mounting bracket and actuator for use on pop bumpers on many solid-state games that use ONE SET... more
More Info | Related Items
|
$14.95 each
Temporarily out. Please check back. more info...
|
| Pop Bumper Switch Stack Assembly - Left Mount (Data East/Sega/Stern) Part #: 515-6459-09L Condition: New
Complete switch assembly with mounting bracket and actuator for use on pop bumpers on many solid-state games that use ONE SET... more
More Info | Related Items
|
$14.95 each
Temporarily out. Please check back. more info...
|
| Microswitch with Wireform Actuator Part #: 180-0040-01 Condition: New
Microswitch with extended wireform actuator. Used on vertical up-kickers (VUK) on some Data East games. Revision B design-... more
More Info | Related Items | Order
|
$5.95 each
Order
|
| Large Microswitch With Short Blade Part #: 180-5009-00 Condition: New
Large microswitch with short blade. Commonly used for ball trough in many Bally, Data East, and Williams games. Replaces part... more
More Info | Related Items | Order
|
$3.75 each
Order
|
| Microswitch With Blade Actuator Part #: 180-5010-01 Condition: New
Standard microswitch unit with removable blade actuator. Blade measures 1-11/16" (43mm). Replaces old part # 180-5010-00. As... more
More Info | Related Items | Order
|
$7.95 each
(10 Available)
Order
|
| Microswitch With Short Blade Actuator Part #: 180-5010-04 Condition: New
Standard microswitch unit with removable blade actuator. Blade measures 1-5/16" (33mm).
More Info | Related Items | Order
|
$8.25 each
Order
|
| Large Microswitch with Long Actuator Blade Part #: 180-5011-00 Condition: New
Large microswitch body with actuator blade mounted in rear position on switch body. Used as ball outhole switch and for other... more
More Info | Related Items | Order
|
$5.99 each
Order
|
| Large Microswitch with Short Actuator Blade Part #: 180-5052-00 Condition: New
Large microswitch body with short actuator blade. Used on up-kicker mechanisms and motor assemblies and cams in various... more
More Info | Related Items | Order
|
$7.95 each
(8 Available)
Order
|
| Microswitch Body - Small, With/Without Diode Part #: MICROSWITCH Condition: New
Standard replacement microswitch unit- high-quality Cherry brand as used in most pinball games from mid-1980s on up. Bare... more
More Info | Related Items | Order
|
$4.00 each
Order
|
| Microswitch with Wireform Actuator Part #: 180-5053-00 Condition: New
Microswitch with angled actuator wire and switch diode. As used in ball shooter lane or kickback lane on some Data East games,... more
More Info | Related Items | Order
|
$8.99 each
Order
|
| Microswitch with Blade Actuator Part #: 180-5057-00 Condition: New
Microswitch body with angled actuator blade. Stern replacement part # 180-5057-00, as used on Lord of the Rings on the... more
More Info | Related Items | Order
|
$7.95 each
Order
|
| Microswitch with Wireform Actuator & Diode (Data East) Part #: 180-5064-01 Condition: New
Microswitch body with actuator wireform and diode attached. Commonly used on up-kicker mechanisms on many Data East games.... more
More Info | Related Items | Order
|
$10.99 each
Order
|
| Microswitch with Blade Actuator Part #: 180-5087-00 Condition: New
Microswitch body with long angled actuator blade. Used in many applications including Data East ramp ball gate assembly #... more
More Info | Related Items | Order
|
$7.25 each
(9 Available)
Order
|
| Microswitch with Blade Actuator & Diode Part #: 180-5093-00 Condition: New
Microswitch body with angled actuator blade and switch diode.
More Info | Related Items | Order
|
$12.95 each
(13 Available)
Order
|
| Microswitch with Wireform Actuator Part #: 180-5100-01 Condition: New
Microswitch body with wireform actuator. Used on select Data East, Sega, and Stern Pinball games.
More Info | Related Items | Order
|
$8.12 each
Order
|
| Microswitch Assembly for VUK and Saucer Kick-Outs Part #: 180-5116-00 Condition: New
DISCONTINUED - Superceded by 180-5116-01.
Microswitch assembly with... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Microswitch Assembly for VUK and Saucer Kick-Outs Part #: 180-5116-01 Condition: New
Used on many late-model Stern Pinball games for vertical up-kickers (VUKs) and saucer kickouts. Can also be used in place of... more
More Info | Related Items | Order
|
$12.95 each
(2 Available)
Order
|
| Microswitch w/Roller Actuator Part #: 180-5119-02 Condition: New
Microswitch unit with roller actuator, as used in ball troughs and other mechanisms on Data East, Sega, and modern Stern... more
More Info | Related Items | Order
|
$4.49 each
(12 Available)
Order
|
| Microswitch w/Wireform- Plunger Lane Part #: 180-5157-00 Condition: New
Standard microswitch unit with wireform, as used for rollover switches and plunger lane (ball shooter) switch, in most makes... more
More Info | Related Items | Order
|
$7.95 each
(4 Available)
Order
|
| Microswitch with Blade Actuator - Saucer / Eject Hole Part #: 180-5186-00 Condition: New
Microswitch unit with blade actuator, as used in eject holes or kickout saucers. Can be used on all makes/models that use this... more
More Info | Related Items | Order
|
$9.50 each
Order
|
| Microswitch with Blade Actuator Part #: 180-5190-28 Condition: New
Standard microswitch unit with built-in blade actuator. Blade measures 1-3/16 inches (30mm). Used for spinner switch on most... more
More Info | Related Items | Order
|
$6.95 each
(4 Available)
Order
|
| Microswitch with Blade Actuator Part #: 180-5198-00 Condition: New
Standard microswitch unit with removable blade actuator. Blade measures 2-1/8 inches (55mm). Used as rollover switch on most... more
More Info | Related Items | Order
|
$8.20 each
(4 Available)
Order
|
| Microswitch with Blade Actuator Part #: 180-5210-00 Condition: New
Microswitch body with long angled actuator blade. Long blade measures just under 2 inches overall length, and rises... more
More Info | Related Items | Order
|
$7.15 each
(4 Available)
Order
|
| Universal Rollover Switch with Bracket Part #: A-12245 Condition: New
Rollover microswitch with wireform actuator and plastic mounting bracket. Universal/generic replacement- can be used on most... more
More Info | Related Items | Order
|
$9.95 each
(4 Available)
Order
|
| Rollover Switch (Offset) & Bracket Assembly (Bally/Williams) Part #: A-12687 Condition: New
Rollover microswitch with offset actuator wireform and mounting bracket/hardware.
Available with or without diode... more
More Info | Related Items
|
$19.58 each
Currently Unavailable more info...
|
| Rollover Switch & Bracket Assembly (Bally/Williams) Part #: A-12688 Condition: New
Rollover microswitch with actuator wireform and mounting bracket/hardware.
Available with or without diode (select above... more
More Info | Related Items | Order
|
$13.58 each
(15 Available)
Order
|
| Rollover Switch & Bracket Assembly (Bally/Williams) Part #: A-12688-1 Condition: New
Rollover microswitch with actuator wireform and mounting bracket/hardware.
Available with or without diode (select above... more
More Info | Related Items | Order
|
$13.58 each
(21 Available)
Order
|
| Rollover Switch Assembly w/Bracket (Bally/Williams) Part #: A-17813 Condition: New
Rollover switch assembly with zinc (silver colored) mounting bracket, as used on some later-model Bally/Williams pinball games.... more
More Info | Related Items | Order
|
$12.83 each
(15 Available)
Order
|
| Rollover Switch Assembly w/Bracket (Bally/Williams) Part #: A-17813-1 Condition: New
Rollover switch assembly with yellow (brass colored) mounting bracket, as used on some later-model Bally/Williams pinball... more
More Info | Related Items | Order
|
$8.33 each
(21 Available)
Order
|
| Rollover Microswitch Assembly w/ Mounting Bracket, Right Part #: 500-6227-04 Condition: New
Complete microswitch assembly for rollover lane, right-hand mount, rounded wire actuator. Includes plastic mounting bracket,... more
More Info | Related Items | Order
|
$15.25 each
(6 Available)
Order
|
| Rollover Microswitch Assembly w/ Mounting Bracket Part #: 515-5133-00 Condition: New
SOLD OUT - DISCONTINUED. Use 500-6227-04 as replacement.
Complete microswitch... more
More Info | Related Items
|
$9.00 each
Discontinued more info...
|
| Microswitch with Wireform Actuator Part #: 5647-12073-32 Condition: New
Microswitch body with wireform actuator. Many uses, including rollover lanes and ramps, on most makes and models.
More Info | Related Items | Order
|
$5.99 each
(2 Available)
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12073-37 Condition: New
Microswitch body with wireform actuator. Many uses, including rollover lanes and ramps, on most makes and models.
More Info | Related Items | Order
|
$5.99 each
(2 Available)
Order
|
| Microswitch - Large, No Actuator Part #: 5647-12133-00 Condition: New
Large microswitch without actuator. Commonly used for start buttons on pinball games and most buttons on later-model video... more
More Info | Related Items | Order
|
$3.95 each
(21 Available)
Order
|
| Microswitch - Large, w/ 3-Inch Actuator Part #: 5647-12133-08 Condition: New
Large white microswitch with 3-inch long straight blade actuator. Rated 0.1A at 125/250vac.
... more
More Info | Related Items | Order
|
$5.85 each
(8 Available)
Order
|
| Large Microswitch with Actuator Blade (Bally/Williams) Part #: 5647-12133-11 Condition: New
Large microswitch body with actuator blade. Blade end has 90-degree bend. Used for kickout saucers, eject holes, drop targets,... more
More Info | Related Items
|
$7.95 each
Currently Unavailable more info...
|
| Eject Switch & Bracket Assembly (Bally/Williams) Part #: A-8933 Condition: New
Large microswitch with blade actuator and mounting bracket. Commonly used for ball eject/saucer kickouts on many makes and... more
More Info | Related Items | Order
|
$15.00 each
Order
|
| Large Microswitch with Long Actuator Blade Part #: 5647-12133-12 Condition: New
Large microswitch body with actuator blade mounted in forward position on switch body. Used as ball outhole switch and for... more
More Info | Related Items | Order
|
$8.99 each
Order
|
| Outhole Switch Assembly, Right Mount (Bally/Williams) Part #: A-10417 Condition: New
Outhole switch assembly used on many Bally and Williams games. Can also be used on some Data East games. Includes large... more
More Info | Related Items | Order
|
$22.47 each
(13 Available)
Order
|
| Microswitch - Large, w/ 3-Inch Actuator Part #: 5647-12133-08 Condition: New
Large white microswitch with 3-inch long straight blade actuator. Rated 0.1A at 125/250vac.
... more
More Info | Related Items | Order
|
$5.85 each
(8 Available)
Order
|
| Large Microswitch with Actuator Blade (Bally/Williams) Part #: 5647-12133-11 Condition: New
Large microswitch body with actuator blade. Blade end has 90-degree bend. Used for kickout saucers, eject holes, drop targets,... more
More Info | Related Items
|
$7.95 each
Currently Unavailable more info...
|
| Microswitch with Wireform Actuator Part #: 5647-12693-01 Condition: New
Microswitch body with wireform actuator. Replaces older part # 5647-12073-01.
More Info | Related Items | Order
|
$5.99 each
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12693-04 Condition: New
Microswitch body with wireform actuator. Many uses, including rollover lanes and plunger lane on most makes and models. Used in... more
More Info | Related Items | Order
|
$5.99 each
Order
|
| Microswitch with Blade Actuator 2-1/4 Inch Part #: 5647-12693-08 Condition: New
Microswitch body with straight flat blade actuator measuring 2-1/4 inches length. Used on select Bally and Williams games.
More Info | Related Items | Order
|
$3.95 each
(13 Available)
Order
|
| Microswitch With Blade Actuator 1-1/2 Inch Part #: 5647-12693-11 Condition: New
Standard microswitch unit with removable blade actuator. Blade measures 1-1/2" (38mm). Available with or without diode attached... more
More Info | Related Items | Order
|
$7.95 each
(10 Available)
Order
|
| Microswitch with Blade Actuator Part #: 5647-12693-13 Condition: New
Microswitch body with blade actuator. Used on select Bally and Williams games.
More Info | Related Items | Order
|
$7.95 each
Order
|
| Microswitch with Blade Actuator Part #: 5647-12693-17 Condition: New
Microswitch body with short blade actuator with upward bend on end. Flat part of actuator blade measures 7/8 inches. Upward... more
More Info | Related Items | Order
|
$7.49 each
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12693-18 Condition: New
Microswitch body with offset wireform actuator. Used on select Bally and Williams games.
NOTE: This switch is... more
More Info | Related Items
|
$12.95 each
Currently Unavailable more info...
|
| Microswitch with Wireform Actuator Part #: 5647-12693-19 Condition: New
Microswitch body with wireform actuator. Many uses, including rollover lanes and ramps, on most makes and models.
NOTE:... more
More Info | Related Items | Order
|
$3.95 each
Order
|
| Microswitch with Blade Actuator Part #: 5647-12693-21 Condition: New
Microswitch body with blade actuator. Many uses, including rollover lanes and ramps, on most makes and models.
More Info | Related Items | Order
|
$4.95 each
(18 Available)
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12693-25 Condition: New
Microswitch body with wireform actuator. Typically used for ramp switches, ball troughs, and similar devices. Can be used on... more
More Info | Related Items | Order
|
$8.99 each
(7 Available)
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12693-26 Condition: New
OBSOLETE - Not currently available. May be able to use # 5647-12693-20 or ... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Microswitch with Wireform Actuator Part #: 5647-12693-32 Condition: New
Microswitch body with wireform actuator. Many uses, including rollover lanes and ramps, on most makes and models.
More Info | Related Items | Order
|
$5.99 each
(2 Available)
Order
|
| Microswitch with Blade Actuator Part #: 5647-12693-39 Condition: New
Microswitch body with blade actuator with upward bend on end. Long part of actuator measures 1-1/4 inches. Upward bend measures... more
More Info | Related Items | Order
|
$5.95 each
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12693-48 Condition: New
Microswitch body with offset wireform actuator. Used for right eye on Williams Machine: Bride of PinBot.
More Info | Related Items | Order
|
$10.95 each
(6 Available)
Order
|
| Microswitch with Extended Wireform Part #: 5647-12693-62 Condition: New
Microswitch body with extended wireform actuator. Used on select late-model Bally and Williams games.
More Info | Related Items | Order
|
$8.00 each
Order
|
| Microswitch with Wireform Actuator Part #: 5647-12693-69 Condition: New
Microswitch body with wireform actuator. Many uses, including rollover lanes and ramps, on most makes and models.
More Info | Related Items | Order
|
$5.99 each
Order
|
| Reed Switch Assembly (Bally/Williams) Part #: 20-10293 Condition: New
Reed switch assembly as used on some late-model Bally/Williams games. Mostly used on ramps to detect ball movement without a... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Reed Switch Mounting Bracket (Bally/Williams) Part #: 20-10293BKT Condition: Used
Thin metal bracket that rivets to ramp to hold ball detector (reed) switch. Use with reed switch # ... more
More Info | Related Items
|
$5.00 each
Currently Unavailable more info...
|
| Reed Switch Assembly (Sega / Stern) Part #: 180-5145-00 Condition: New
Reed switch assembly as used on many Sega & modern Stern Pinball games. Mostly used on ramps to detect ball movement without a... more
More Info | Related Items
|
$20.99 each
Temporarily out. Please check back. more info...
|
| Service Button Assembly - 3 Buttons (Sega / Stern) Part #: 500-6056-03 Condition: New
Coin door service button assembly with 3 pushbutton switches (all normally open, single-pole, momentary contact). Includes red,... more
More Info | Related Items | Order
|
$17.95 each
(2 Available)
Order
|
| Service Button Assembly - 4 Buttons Part #: 5641-12724-00 Condition: New
Coin door service button assembly with 4 pushbutton switches. As used on most Bally & Williams games from late 1980s through... more
More Info | Related Items | Order
|
$14.95 each
(2 Available)
Order
|
| Service Button Assembly - 3 Buttons Part #: 5641-09369-00 Condition: New
Coin door service button assembly with 3 pushbutton switches. As used on most Bally & Williams games from late 1970s through... more
More Info | Related Items
|
$9.95 each
Currently Unavailable more info...
|
Optos & Opto Boards:
| Opto Switch Emitter Element (LED) Part #: OPTO_EMITTER Condition: New
Replacement emitter (infrared LED) element for opto switch pairs. This is the element in an opto switch pair that emits... more
More Info | Related Items | Order
|
$0.99 each
(12 Available)
Order
|
| Opto Switch Receiver Element Part #: OPTO_RECEIVER Condition: New
Replacement receiver (light-activated transistor) element for opto switch pairs. This is the element in an opto switch pair... more
More Info | Related Items | Order
|
$1.05 each
(14 Available)
Order
|
| Opto Switch Emitter Element / LED (Capcom) Part #: DI00103 Condition: New
Replacement emitter element (infrared LED) for opto switch pairs. Commonly used in Capcom games, but may be used in other... more
More Info | Related Items | Order
|
$1.69 each
(8 Available)
Order
|
| Opto Switch Receiver Element (Capcom) Part #: TR00104 Condition: New
Replacement receiver (light-activated transistor) element for opto switch pairs. Commonly used in Capcom games, but may be used... more
More Info | Related Items | Order
|
$1.39 each
(8 Available)
Order
|
 

| Opto Emitters & Receivers: - For Late-Model Bally/Williams Games -
Opto emitter and receiver PCB's, assemblies, and individual replacement elements. Used on many late-model Bally and Williams games. Sold individually, but used in pairs in the pinball machine (one emitter and one receiver per "opto" pair).
The emitter unit projects UV light which is picked up by the receiver unit mounted across from it. When a ball rolls between the emitter and receiver units on your game, a break in the UV light beam translates to a switch signal in the game's electronics. If you have an "opto" that isn't detecting when a ball rolls past it, chances are either your emitter or receiver opto unit is faulty.
Image: |
Type: |
Part #: |
Price: |
Order: |
| Emitter PCB (PCB with element)
| A-14231
| $3.99 each | Order
|
| Receiver PCB (PCB with element)
| A-14232
| $3.99 each | Order
|
| Emitter Assembly (PCB with element and housing)
| A-16908
| $6.95 each | Order
|
| Receiver Assembly (PCB with element and housing)
| A-16909
| $6.95 each | Order
|
| Emitter Element (Element only)
| OPTO_EMITTER
| $0.99 each | Order
|
| Receiver Element (Element only)
| OPTO_RECEIVER
| $1.05 each | Order
|
|
|
| 16-Opto Driver Board (Bally/Williams) Part #: A-16998 Condition: New
16-opto switch driver board for use in some later-model Bally/Williams games. Includes mounting brackets. Replaces A-16998.2,... more
More Info | Related Items
|
Currently Unavailable more info...
|
| 16-Opto Driver Board (Bally/Williams) Part #: A-22019 Condition: New
16-opto switch driver board for use in some later-model Bally/Williams games. Mounting brackets not included (swap over from... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Opto Transceiver Assembly w/ Wire Harness (Stern) Part #: 500-6775-01 Condition: New
Opto transceiver assembly that functions as EITHER an emitter OR a receiver. Use 2 of these as a pair to make an opto switch.... more
More Info | Related Items | Order
|
$6.95 each
(6 Available)
Order
|
| Opto Emitter Assembly w/ Wire Harness (Stern) Part #: 500-6746-00 Condition: New
Obsolete- use 500-6775-01 as replacement.
Opto emitter assembly with wire harness... more
More Info | Related Items
|
$23.75 each
SOLD OUT more info...
|
| Opto Receiver Assembly w/ Wire Harness (Stern) Part #: 500-6747-00 Condition: New
Opto receiver assembly with wire harness and 2-pin female connector. For use on many later-model Stern Pinball games. Use with... more
More Info | Related Items | Order
|
$23.75 each
Order
|
| Opto Receiver PCB (Gottlieb / Premier) Part #: 31240 Condition: New
Small PCB with opto receiver LED element and solder pads. Used in some late-model Gottlieb and Premier games. Measures approx.... more
More Info | Related Items
|
$8.69 each
Currently Unavailable more info...
|
| Opto Emitter / Transmitter PCB (Gottlieb / Premier) Part #: 31241 Condition: New
Small PCB with opto emitter LED element and solder pads. Used in some late-model Gottlieb and Premier games. Measures approx.... more
More Info | Related Items
|
$8.69 each
Currently Unavailable more info...
|
| Opto Emitter/Receiver Assembly Part #: 5490-10159-00 Condition: New
Discontinued/obsolete part. Can use # 5490-12451-00 as replacement.
New opto... more
More Info | Related Items
|
$4.54 each
Currently Unavailable more info...
|
| Opto Emitter/Receiver Assembly - Long Leads Part #: 5490-12451-00 Condition: New
New opto emitter/receiver assembly with long leads, as used on clock minute PCB in Twilight Zone. Each unit includes... more
More Info | Related Items | Order
|
$4.75 each
Order
|
| Opto Emitter/Receiver Assembly (Stern) Part #: H21A1 Condition: New
Replacement opto emitter/receiver unit as used in late-model Stern Pinball games. This part is the most common cause of... more
More Info | Related Items | Order
|
$7.95 each
(11 Available)
Order
|
| Wheel of Fortune (Stern) Wheel Slotted Opto 3mm Part #: 112-6004-00 Condition: New
Small surface-mount horizontal slotted opto emitter/receiver unit EE-SX11091. Used on Stern Wheel of Fortune pinball for... more
More Info | Related Items
|
$11.60 each
Call or e-mail |
| Opto Transmitter/Receiver Amplifier PC Board (Stern) Part #: 520-5239-01 Condition: New
Opto transmitter/receiver PC board used in later-model Stern Pinball games. Runs 2 pairs of optos. Replaces earlier part #... more
More Info | Related Items | Order
|
$19.95 each
(3 Available)
Order
|
| Opto Switch PC Board, Single Drop Target - Stern Games Part #: 520-5252-01 Condition: New
Single opto PCB as used on single drop target assemblies on some later-model Stern pinball games. If your drop target doesn't... more
More Info | Related Items | Order
|
$69.95 each
(1 Available)
Order
|
| Opto PC Board, Inline Drop Targets (Stern) Part #: 520-5255-00 Condition: New
Opto switch PCB used on in-line drop target banks on some late-model Stern Pinball games.
More Info | Related Items | Order
|
$20.00 each
(4 Available)
Order
|
| Opto Switch PC Board - Stern Games Part #: 520-5292-00 Condition: New
Single opto PCB as used on cannon assembly (pro and L.E. models) and bell assembly (L.E. models only) assemblies in Stern... more
More Info | Related Items | Order
|
$16.95 each
Order
|
| Opto Board, 1-Bank Drop Target Assembly (Williams) Part #: C-11903-R Condition: New
NOS factory-original opto PC board for single drop target assemblies as used on many mid-1980s & up Williams games. Hard to... more
More Info | Related Items | Order
|
$29.95 each
Order
|
| Flipper Button Switch Opto Board Assembly, Type 1 (Bally/Williams) Part #: A-15878 Condition: New
OBSOLETE / DISCONTINUED. PC board available as # A-15894, or may be able to use complete... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Flipper Button Opto Board, Type 2 (Bally/Williams) Part #: A-20207.1 Condition: New
New aftermarket replacement opto PC board for flipper buttons in late-model Bally & Williams WPC games. 2nd design featuring... more
More Info | Related Items | Order
|
$25.00 each
(10 Available)
Order
|
| Flipper Button Opto Interruptor, Type 2 (Bally/Williams) Part #: 03-9001.1 Condition: New
Plastic interruptor for opto PCB used for flipper buttons on late-model Bally and Williams games. Black plastic. Replaces... more
More Info | Related Items | Order
|
$3.95 each
(6 Available)
Order
|
 Sample
| Sega/Stern Ball Trough Opto PC Boards:
Factory original replacements for the opto emitter and receiver PC boards on late-model Sega and Stern pinball ball troughs. Both single, and dual opto type boards are available. Failed opto boards are the common cause of multiple balls being served or continuously-kicking ball shooters.
|
Type: |
Optos |
Image: |
Part #: |
Price: |
PayPal: |
Emitter | 1
|
| 515-7307-00
| $30.92 each | Order
|
Receiver | 1
|
| 515-7308-00
| $28.00 each | Order
|
Emitter | 2
|
| 515-0173-00 Also replaces: 520-5173-00
| $11.49 each | Order
|
Receiver | 2
|
| 515-0174-00 Also replaces: 520-5174-00
| $11.49 each | Order
|
Emitter & Receiver - 2pc set (1-Element) | 1
|
| 502-5008-00
| $36.49 set | Order
|
Emitter | 1
|
| 520-5230-00
| $26.25 each | Order
|
Receiver | 1
|
| 520-5231-00
| $26.25 each | Order
|
|
|

| Sega/Stern Playfield Opto PC Boards - Emitter / Receiver:
Factory original replacements for the tall "long hop" opto emitter and receiver PC boards as used on some late-model Sega and Stern pinball games, including Harley Davidson, Independence Day, South Park, X-Files and more.
|
Type: |
Image: Click to Enlarge |
Part #: |
Price: |
Order: |
Notes: |
Emitter
|
| 520-5082-00
| $37.49 | Order
|
|
Receiver
|
| 520-5083-00
| $36.89 | Order
| Early design with no diode next to LED.
|
Receiver
|
| 520-5083-01
| $36.89 | Order
| Updated design with diode next to LED.
|
Emitter & Receiver
|
| 520-5082-SET
| $56.95 | Order
| 2-piece replacement set. Updated design.
|
|
|
Potentiometers (Pots, Volume Control Knobs):
| Potentiometer- 5K Ohm Rotary Linear Taper, 15mm Shaft - Universal Part #: POT5K1 Condition: New
Universal 5K-ohm pot for use in many different types of pinball and other arcade games. Commonly used as volume control knob in... more
More Info | Related Items | Order
|
$4.95 each
Order
|
Line Cords, Plugs, Surge Protectors, Power Strips:
| Power Cord, Grounded - 8-Foot 16 Gauge Flat Brown w/ Wire Leads Part #: COR001 Condition: New
Great restoration part! Similar to original 3-wire brown power cords as originally used on many vintage solid-state pinball... more
More Info | Related Items | Order
|
$14.38 each
Order
|
| Power Cord, Grounded - 9 Foot 14 Gauge Round Black w/ Wire Leads Part #: COR002 Condition: New
9-foot long power cord, black, with grounded 3-prong plug end (wall plug), and bare wire leads at the other end (game end).... more
More Info | Related Items | Order
|
$17.32 each
Order
|
| Power Cord, Grounded - 7-1/2 Foot 18 Gauge Round Black w/ Female Plug End Part #: COR003 Condition: New
7-1/2 foot long power cord, black, with grounded 3-prong plug end (wall plug), and 3-prong IEC female connector plug on the... more
More Info | Related Items | Order
|
$8.95 each
Order
|
| Power Cord Adapter for Service Outlet (Bally / Williams) Part #: COR004 Condition: New
For late-model Bally/Williams WPC-S and WPC-95 games! This 14-inch adapter cord plugs into the unique receptacle on the power... more
More Info | Related Items | Order
|
$5.95 each
Order
|
| Service Outlet - Cabinet Power Part #: SER001 Condition: New
Clip-in service outlet, as used on power interface box/panel in most domestic makes and models (U.S. / North America). Provides... more
More Info | Related Items | Order
|
$3.95 each
Order
|
| Line Cord Plug End, Grounded 3-Prong Part #: PLUG3PRONG Condition: New
For all makes and models of games! If you own an electronic (1977 or newer) pinball machine or video game, your game should be... more
More Info | Related Items | Order
|
$5.50 each
Order
|
| Line Cord Plug End, 2-Prong Part #: PLUG2PRONG Condition: New
For use on older electro-mechanical (non-electronic) games which did not require a ground lead. Rugged, durable unit with sleek... more
More Info | Related Items | Order
|
$3.95 each
(3 Available)
Order
|
| Power Strip, 4-Outlet Switched / Surge-Protected Part #: PSTRIPX4 Condition: New
Protect your game's valuable electronics! This handy and compact 4-outlet power strip features surge protection that will... more
More Info | Related Items | Order
|
$9.95 each
Order
|
Varistors (MOV):
| 47V DC Varistor / Surge Protector Part #: MOV047VDC Condition: New
Commonly used in Williams and Bally games on power supply for protection of the DC solenoid power circuit. Replacement for... more
More Info | Related Items | Order
|
$1.49 each
Order
|
| 130V AC Varistor / Surge Protector Part #: MOV130VAC Condition: New
Used by most electronic pinball machines from 1977-up which are operated at 120vac. This metal-oxide varistor protects the... more
More Info | Related Items | Order
|
$1.49 each
Order
|
Batteries & Battery Holders:
| CR2032 Lithium Battery - 3-Volt Part #: CR2032 Condition: New
Replacement memory-backup battery as used in PC-based video games including Arcade Legends 1, Ultracade, and... more
More Info | Related Items | Order
|
$3.99 each
Order
|
| CR2032 Lithium Battery w/ Solder Leads- 3-Volt Part #: CR2032A Condition: New
Replacement memory-backup battery with solder leads for direct PC-board mounting (requires... more
More Info | Related Items | Order
|
$1.50 each
Order
|
| CR2430 Lithium Battery - 3-Volt Part #: CR2430 Condition: New
Replacement memory-backup battery for MPU boards as used in many later-model pinball games including modern Stern SAM System... more
More Info | Related Items | Order
|
$2.69 each
(13 Available)
Order
|
| CR2032 / CR2025 Lithium Battery Holder - Horizontal PC Mount Part #: HU2032 Condition: New
Horizontal PCB mount battery holder for CR2032 or CR2025 lithium battery. Through-hole pcb... more
More Info | Related Items | Order
|
$1.99 each
Order
|
| CR2430 Lithium Battery Holder - Horizontal PC Mount Part #: HU2430 Condition: New
Horizontal PCB mount battery holder for CR2430 lithium battery used on later-model Stern... more
More Info | Related Items | Order
|
$1.99 each
Order
|
| 3 x AA Battery Holder w / Wire Leads Part #: BATTHLDRKIT Condition: New
Includes mounting screws. 3-position screw-mountable battery holder for "AA" size alkaline or rechargeable batteries.... more
More Info | Related Items | Order
|
$2.75 each
Order
|
| MPU Board Battery Holder- Bally / Williams Early Style Part #: BATTHLDR2 Condition: New
Original style as used on Williams games from 1977-1993 and Bally/Williams games from late 1980s through 1993. Original factory... more
More Info | Related Items | Order
|
$7.50 each
(5 Available)
Order
|
| MPU Board Battery Holder- Bally / Williams Late Style Part #: A-15814 Condition: New
Original style as used on Bally & Williams games from approx. 1994-up. Original factory part # 5881-09021-00. Solders directly... more
More Info | Related Items | Order
|
$12.99 each
(3 Available)
Order
|
Switching Power Supplies:
| Switching Power Supply - 15 Amp 110 Watts Part #: PWRSUP15 Condition: New
Ideal, compact, modern replacement power supply for many commercial arcade/video and other coin-op games and... more
More Info | Related Items | Order
|
$37.95 each
(5 Available)
Order
|
| Arcade Legends 1 (Chicago Gaming) Power Supply Part #: PS_AL1 Condition: New
Power supply for PC unit used in original Arcade Legends (Arcade Legends 1). Motherboard-activated on/off.
... more
More Info | Related Items
|
$49.95 each
Call or e-mail |
Connectors- Pins & Housings:
NOTE: Sales on electrical parts are all final- no returns, refunds, or exchanges. Instructions not included- tools and connector pins/parts listed below are sold with the understanding that you "know what you're doing". Some experience with electronic work/repair is recommended.
| Connector Pin Headers:
Available in 2 common pin-spacing sizes- small pin spacing (0.100" inch), and large pin spacing (0.156" inch).
0.100" Spacing Headers:
|
| 0.156" Spacing Headers:
|
Pin Length: See specs above. Some applications may require a longer or shorter pin- check your application before ordering.
Different Sizes: Most header strips can be easily cut shorter (especially "break away" headers) if you need a shorter strip, as required (such as an 4-pin, or 5-pin placement, etc.) Combine header strips on PC board to make longer connectors- such as two 10-pin headers to make a 20-pin header.
Friction Lock: Some headers come with a "friction lock" tab molded in to the back side (see listings/images below), which will "lock" into place on corresponding housings that have "locking ramp" tabs. Headers with friction lock can also be used with housings that have no locking ramp tabs, and vice-versa.
Break-Away: Some headers are made as "break-away" strips (see listings/images below) that can be easily snapped-off to make a shorter strip.
0.100" (Small) Headers (Break-Away):
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
12 | 0.100"
|
| 22-28-4361-12
| $1.49 each | Order
|
15 | 0.100"
|
| 22-28-4361-15
| $1.49 each | Order
|
16 | 0.100"
|
| 22-28-4361-16
| $1.49 each | Order
|
17 | 0.100"
|
| 22-28-4361-17
| $1.49 each | Order
|
18 | 0.100"
|
| 22-28-4361-18
| $1.49 each | Order
|
19 | 0.100"
|
| 22-28-4361-19
| $1.49 each | Order
|
20 | 0.100"
|
| 22-28-4361-20
| $1.49 each | Order
|
23 | 0.100"
|
| 22-28-4361-23
| $1.49 each | Order
|
25 | 0.100"
|
| 22-28-4361-25
| $1.49 each | Order
|
28 | 0.100"
|
| 22-28-4361-28
| $1.49 each | Order
|
36 | 0.100"
|
| 22-28-4361
| $1.49 each | Order
|
0.156" (Large) Headers (Break-Away):
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
12 | 0.156"
|
| 26-48-1121
| $1.13 each | Order
|
0.156" (Large) Headers (Break-Away w/ Locking Ramp):
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
12 | 0.156"
|
| 26-48-1125
| $1.92 each | Order
|
0.156" (Large) Headers:
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
12 | 0.156"
|
| 26-60-2120
| $1.42 each | Order
|
0.156" (Large) Headers (w/ Locking Ramp):
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
6 | 0.156"
|
| 26-60-4060
| $1.38 each | Order
|
7 | 0.156"
|
| 26-60-4070
| $1.56 each | Order
|
8 | 0.156"
|
| 26-60-4080
| $1.60 each | Order
|
9 | 0.156"
|
| 26-60-4090
| $1.60 each | Order
|
10 | 0.156"
|
| 26-60-4100
| $1.80 each | Order
|
11 | 0.156"
|
| 26-60-4110
| $1.85 each | Order
|
12 | 0.156"
|
| 26-60-4120
| $1.90 each | Order
|
|

Click to enlarge
Connector housing colors may vary
| Connector Pin Housings - IDC Style:
IDC or "Insulation Displacement Connectors" come with built-in pins. Wires are simply pressed into the back of the housing with a tool, and the built-in pins "bite" into the wire, holding it in place, and making the electrical connection.
Uses: Commonly used on some later solid-state models (late 1970's) through modern pinball games. Can also be used on older-model games to replace crimp pin connectors (available below).
Sizes: Two sizes are available accomodating various numbers of pins (see chart at right)- large pin spacing (0.156" inch between pins), and small pin spacing (0.100" inch between pins). These connectors accomodate wires in the range of 16-22 AWG (ie: most all common pinball and video game applications).
Locking Ramp: IDC connector housings come with "locking ramp" tabs molded in to reverse side, which will "lock" into place on corresponding header pin units that have "friction lock" backing. Housings with locking ramp can also be used with header pin units that have no backing for locking ramps, and vice-versa. See Connector Pin Headers above for more info.
Polarizing Keys (Pins): Most connector headers & housings will have one pin that is "blank", which is the "key". This prevents connectors from being installed in the wrong place. New polarizing keys are available separately for replacement in IDC housings- see part # 15-04-0297 below.
Wire Insertion Tools: IDC insertion tools are available in our Electrical Tools section below.
0.100" (Small) IDC Housings:
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
4 | 0.100"
|
| A31095-4
| $1.30 ea
| Order
|
5 | 0.100"
|
| A31095-5
| $1.30 each | Order
|
6 | 0.100"
|
| A31095-6
| $1.30 each | Order
|
7 | 0.100"
|
| A31095-7
| $1.35 each | Order
|
8 | 0.100"
|
| A31095-8
| $1.35 each | Order
|
9 | 0.100"
|
| A31095-9
| $1.35 each | Order
|
10 | 0.100"
|
| A31060-10
| $1.40 each | Order
|
11 | 0.100"
|
| A31060-11
| $1.40 each | Order
|
12 | 0.100"
|
| A31060-12
| $1.40 each | Order
|
15 | 0.100"
|
| A31063-15
| $1.67 each | Order
|
0.156" (Large) IDC Housings:
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
2 | 0.156"
|
| A31664-2
| $1.92 each | Order
|
3 | 0.156"
|
| A31664-3
| $1.92 each | Order
|
4 | 0.156"
|
| A31664-4
| $1.92 each | Order
|
5 | 0.156"
|
| A31664-5
| $1.92 each | Order
|
6 | 0.156"
|
| A31664-6
| $1.92 each | Order
|
7 | 0.156"
|
| A31664-7
| $1.92 each | Order
|
8 | 0.156"
|
| A31664-8
| $1.92 each | Order
|
9 | 0.156"
|
| A31664-9
| $1.92 each | Order
|
10 | 0.156"
|
| A31664-10
| $1.92 each | Order
|
11 | 0.156"
|
| A31664-11
| $1.50 each | Order
|
12 | 0.156"
|
| A31354-12
| $1.55 each | Order
|
|
|
| Connector Pin Housings - Crimp Pin Style:
These housings come without pins (available separately below). Pins are crimped and soldered onto wires, then pushed into these housings, and "click" in place.
Uses: Commonly used on older solid-state pinball games. Can also be used on later-model games to replace IDC connectors (available above) to provide better connections in some applications.
Sizes: Available in 2 common pinball sizes- large pin spacing (0.156" inch), and small pin spacing (0.100" inch). Connector housings accept crimp/solder pins listed below.
Different Lengths: These nylon housings can be easily cut shorter, if you need a shorter strip, as required (such as a 6-pin, or 9-pin placement, etc.)
Locking Ramp: Some housings come with "locking ramp" tabs molded in to reverse side, which will "lock" into place on corresponding header pin units that have "friction lock" backing. Housings with locking ramp can also be used with header pin units that have no backing for locking ramps, and vice-versa. See Connector Pin Headers above for more info.
Crimp & Solder Pins: Available below in various sizes and styles. Pins should be crimped onto wire properly, before being inserted in housing. We recommend a small bit of solder on the crimped pin to secure the wire firmly, and guarantee good connection between pin and wire.
Crimp and Extractor Tools: See our Electrical Tools section below.
0.100" (Small) Crimp Pin Connector Housings:
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
12 | 0.100"
|
| 22-01-2127
| $1.42 each | Order
|
25 | 0.100"
|
| 22-01-2257
| $1.42 each | More Info
|
0.156" (Large) Crimp Pin Connector Housings:
Number of Pins: |
Pin Spacing: |
Image: |
Part #: |
Price: |
Order: |
4 | 0.156"
|
| 09-50-3041
| $0.50 each | Order
|
5 | 0.156"
|
| 09-50-3051
| $0.83 each | Order
|
6 | 0.156"
|
| 09-50-3061
| $0.83 each | Order
|
7 | 0.156"
|
| 09-50-3071
| $0.83 each | Order
|
8 | 0.156"
|
| 09-50-3081
| $0.83 each | Order
|
9 | 0.156"
|
| 09-50-3091
| $0.88 each | Order
|
10 | 0.156"
|
| 09-50-3101
| $0.96 each | Order
|
11 | 0.156"
|
| 09-50-3111
| $0.99 each | Order
|
12 | 0.156"
|
| 09-50-3121
| $1.67 each | Order
|
20 | 0.156"
|
| 09-50-7201
| $1.99 each | Order
|
|
|
| Connector Pin Housings - Card Edge - Crimp Pin Style:
These housings are for card-edge connectors and come without pins. They use KK style 0.156" pins for card-edge connectors (available separately below). Pins are crimped and soldered onto wires, then pushed into these housings, and "click" in place.
Housings come in single-sided style (for connections on one side of the board only), or double-sided style (for connections on both sides of the board).
Crimp and Extractor Tools: See our Electrical Tools section below.
|
Number of Pin Positions: |
Single or Double Sided: |
Image: |
Part #: |
Price: |
Order: |
18 | Single
|
| 1-640136-8
| $3.00 each | Order
|
25 | Double
|
| 09-50-5255
| $5.99 each | Order
|
|
|
| Connector Housing Pin - 0.156 Inch Spacing, Trifurcon Type Part #: 08-50-0189 Condition: New
Heavy-duty Trifurcon connector pin for use in standard 0.156-inch crimp-pin style housings. This connector pin can be crimped... more
More Info | Related Items | Order
|
$0.18 each
Order
|
| Connector Housing Pin - 0.156 Inch Spacing Part #: 08-50-0108 Condition: New
Standard connector housing pin for use in 0.156-inch crimp-pin style housings. This connector pin can be crimped to stripped... more
More Info | Related Items | Order
|
$0.17 each
Order
|
| Connector Housing Pin - 0.100 Inch Spacing Part #: 08-50-0114 Condition: New
Standard connector housing pin for use in 0.100-inch crimp-pin style housings. This connector pin can be crimped to stripped... more
More Info | Related Items | Order
|
$0.18 each
Order
|
| Connector Housing Pin - 0.156 Inch Spacing, Card-Edge / KK-Type Part #: 08-03-0304 Condition: New
KK type card-edge housing connector pin, for use in crimp-pin style card-edge housings where the wire is crimped/soldered to... more
More Info | Related Items
|
Currently Unavailable more info...
|
| Connector Housing Pin - 0.156 Inch Spacing, Card-Edge Type Part #: 350011-1 Condition: New
Card-edge housing connector pin, for use in crimp-pin style card-edge housings. This connector pin can be crimped to stripped... more
More Info | Related Items | Order
|
$0.29 each
Order
|
| Polarizing Keys for 0.156 IDC Connector Housings, Set of 10 (not for use with Molex) Part #: 15-04-0297 Condition: New
NOT FOR USE WITH MOLEX HOUSINGS - USED FOR 0.156 IDC... more
More Info | Related Items | Order
|
$2.00 set
(4 Available)
Order
|
| Connector Housing, 8-Position 0 0.156 Inch Spacing (Williams Driver Board) Part #: 09-52-3082 Condition: New
Brand new correct replacement header pin receptacle as used along the top of Williams pinball driver boards in solid-state (SS)... more
More Info | Related Items | Order
|
$2.07 each
Order
|



| 0.062" Male/Female Polarized Connector Housings:
Molex® brand/type connector housings which use 0.062" diameter connector pins and are polarized so they will fit together in only one direction. Several sizes available.
Use 0.062" pins (available separately)- male pins with male housing, female pins with female housing.
Uses: Commonly used for in-harness connectors on older solid-state Bally, Stern, and Williams games (1977-1985) including coin door harness (Bally/Stern) and inter-cabinet harnesses (Williams). Also used for smaller 2,3,4-pin connectors on later-model Bally/Williams (WPC) games for optos, switches, lamps, and other possible applications.
Crimp and Extractor Tools: See our Electrical Tools section below for tools you can use to extract pins from, and crimp wires into, pins that these housings use.
|
0.062" (shown here) are the SMALLER size round pins used in most pinball applications. For larger round pins/connectors, use 0.093" next section below.
# of Pins: |
Gender: |
Image: (Sample) |
Part #: |
Price ea: |
Order: |
1 | Female
|
| 03-06-1011
| $0.28 each | Order
|
1 | Male
|
| 03-06-2011
| $0.20 each | Order
|
2 | Female
|
| 03-06-1023
| $0.40 each | Order
|
2 | Male
|
| 03-06-2023
| $0.40 each | Order
|
3 | Female
|
| 03-06-1032
| $0.50 each | Order
|
3 | Male
|
| 03-06-2032
| $0.52 each | Order
|
4 | Female
|
| 03-06-1042
| $0.90 each | Order
|
4 | Male
|
| 03-06-2042
| $0.80 each | Order
|
4 | Female
|
| 03-06-1044
| $0.80 each | Order
|
4 | Male
|
| 03-06-2044
| $0.80 each | Order
|
5 | Female
|
| 03-06-1056
| $0.84 each | Order
|
5 | Male
|
| 03-06-2055
| $0.72 each | Order
|
6 | Female
|
| 03-06-1062
| $0.86 each | Order
|
6 | Male
|
| 03-06-2061
| $0.82 each | Order
|
9 | Female
|
| 03-06-1092
| $0.94 each | Order
|
9 | Male
|
| 03-06-2092
| $0.76 each | Order
|
12 | Female
|
| 03-06-1122
| $0.90 each | Order
|
12 | Male
|
| 03-06-2122
| $0.90 each | Order
|
15 | Female
|
| 03-06-1152
| $1.30 each | Order
|
15 | Male
|
| 03-06-2152
| $1.14 each | Order
|
24 | Female
|
| 03-06-1241
| $3.49 each | Order
|
24 | Male
|
| 03-06-2242
| $3.49 each | Order
|
36 | Female
|
| 03-06-1361
| $2.48 each | Order
|
36 | Male
|
| 03-06-2362
| $2.32 each | Order
|
1 | Male Pin
|
| PINM062
| $0.18 each | Order
|
1 | Female Pin
|
| PINF062
| $0.18 each | Order
|
|
|



| 0.093" Male/Female Polarized Connector Housings:
Molex® brand/type connector housings which use 0.093" diameter connector pins and are polarized so they will fit together in only one direction. Several sizes available.
Use 0.093" pins (available separately)- male pins with male housing, female pins with female housing.
Uses: Commonly used for main power supply input and ground connectors on most Williams solid-state pinball games 1977-1988, Bally games approx. 1987-1988, and Data East games. Also used for power, transformer, and lighting connectors in some games. Many other handy uses, too.
Crimp and Extractor Tools: See our Electrical Tools section below for tools you can use to extract pins from, and crimp wires into, pins that these housings use.
|
0.093" (shown here) are the LARGER size round pins used in most pinball applications. For smaller round pins/connectors, use 0.062" in previous section above.
# of Pins: |
Gender: |
Image: (Sample) |
Part #: |
Price ea: |
Order: |
2 | Female
|
| 770065-1
| $0.69 each | Order
|
2 | Male
|
| 770069-1
| $0.74 each | Order
|
3 | Female
|
| 03-09-1032
| $0.89 each | Order
|
3 | Male
|
| 03-09-2032
| $0.89 each | Order
|
4 | Female
|
| 03-09-1042
| $0.99 each | Order
|
4 | Male
|
| 03-09-2042
| $0.99 each | Order
|
6 | Female
|
| 03-09-1064
| $1.99 each | Order
|
6 | Male
|
| 03-09-2062
| $2.24 each | Order
|
9 | Female
|
| 03-09-1094
| $2.36 each | Order
|
9 | Male
|
| 03-09-2092
| $2.67 each | Order
|
12 | Female
|
| 03-09-1126
| $2.60 each | Order
|
12 | Male
|
| 03-09-2121
| $2.98 each | Order
|
1 | Male Pin
|
| PINM093
| $0.18 each | Order
|
1 | Female Pin
|
| PINF093
| $0.18 each | Order
|
|
|
| Power Supply Input Connector Repair Kit - Bally / Williams / Data East Part #: CN1SET Condition: New
Connector repair & replacement kit for main 12-pin power supply input connector as used on many Bally (1987-1990), Data East... more
More Info | Related Items | Order
|
$10.71 set
(4 Available)
Order
|
| 2-Pin Male/Female Wire Connector Set Part #: 2PINMF Condition: New
Add a quick connector to most any 2-wire device for easy removal, testing, and repair. Great for remote-mount battery holder... more
More Info | Related Items | Order
|
$2.15 set
(3 Available)
Order
|
| Round Connector Pins:
Male and female round crimp connector pins in 0.062" -inch and 0.093" -inch sizes- commonly used in old and new pinball and video games.
Pins should be crimped onto wire properly, before being inserted in housing. We recommend a small bit of solder on the crimped pin to secure the wire firmly, and guarantee good connection between pin and wire.
Crimp Tools and Pin Extractor Tools: See our Electrical Tools section below.
|
Size: |
Type: |
Image: |
Part #: |
Price: |
Order: |
0.062" -inch | Male
|
| PINM062
| $0.18 each | Order
|
0.062" -inch | Female
|
| PINF062
| $0.18 each | Order
|
0.093" -inch | Male
|
| PINM093
| $0.18 each | Order
|
0.093" -inch | Female
|
| PINF093
| $0.18 each | Order
|
|
|
Tools - Electrical:
NOTE: Sales on tools and electronic parts are all final- no returns, refunds, or exchanges. Instructions not included- tools and connector pins/parts listed below are sold with the understanding that you "know what you're doing". Some experience with electronic work/repair is recommended.
Not finding what you need here? See our Regular Tools Page, or e-mail us.
| Circuit Breaker Testing Set (6pcs) Part #: CBSET Condition: New
Save fuses and money! This handy set of 4 resettable circuit breakers and 2 clip-on test leads allows you to connect a... more
More Info | Related Items
|
$24.99 set
Temporarily out. Please check back. more info...
|
| Hand Crimper / Stripper Tool Part #: HCT9900 Condition: New
For 0.062 inch dia., 0.093 inch dia., and 0.100 inch / 0.156 inch spaced connector pins- 18-30 AWG wire.
The... more
More Info | Related Items | Order
|
$24.95 each
(4 Available)
Order
|
| Hand Crimper / Stripper Tool Part #: HCT9900A Condition: New
For 0.093 inch dia. and 0.100 inch / 0.156 inch spaced connector pins- 14-24 AWG wire.
Cuts and strips wire from 14-24... more
More Info | Related Items
|
$24.95 each
Call or e-mail |
| Ratcheting Hand Crimper Tool for 0.156 Inch Pins Part #: 63811-7500 Condition: New
For 0.156 inch connector pins, 18-24 AWG wire.
SHIPPING: Special-order item- please allow 2 weeks for domestic... more
More Info | Related Items | Order
|
$293.00 each
Order
|

| IDC Wire Insertion / Punchdown Tools: For .100" and .156" IDC connector housings
Wire insertion / punch down tools for use with both .100" and .156" IDC connector housings (available separately above). These tools are used to press the wire down into the IDC connector from the back side. Built-in pins in the IDC housing will "bite" into the pressed-in wire to hold it in place and make the electrical connection.
|
Connector Size: |
Tool Type: |
Image: |
Part #: |
Price: |
Order: |
0.100" | Commercial
|
| 13-3503
| $60.00 | Order
|
0.156" | Commercial
|
| 13-3504
| $36.08 | Order
|
0.156" | Economy
|
| 478-4517
| $11.95 | Order
|
|
|
 Tool colors may vary
| Crimp Pin Extractor Tools:
Precision Molex/Waldom brand factory pin extractors make connector pin removal easy and painless. For common pinball connectors.
NOTE FOR USE: Do not pry up/down with extractor tools- tips can break off.
|
Pin Type / Size: |
Image: |
Part #: |
Price: |
Order: |
0.062" -inch round pin male/female (For pins # PINF062 & PINM062 above)
|
| EXT062
| $22.95
| Order
|
0.093" -inch round pin male/female (For pins # PINF093 & PINM093 above)
|
| EXT093
| $26.52
| Order
|
0.100" -inch flat housing pin (For pin # 08-50-0114 above)
|
| EXT100
| $16.95
| Order
|
0.156" -inch flat housing pin (Pin # 08-50-0108 or 08-50-0189 above)
|
| EXT156
| $14.95
| Order
|
|
|
| Chip / IC Extractor Tool - Economy Part #: EXT_IC1 Condition: New
Economy extractor tool for use with most standard types of socketed DIP integrated circuits (chips / ICs). Remove socketed ICs... more
More Info | Related Items | Order
|
$3.95 each
(16 Available)
Order
|
| Chip / IC Extractor Tool For 24-36 Pin DIP ICs Part #: EXT_IC2 Condition: New
Extractor tool for use with most standard types of socketed DIP integrated circuits (chips / ICs) with 24-36 pins. Use with... more
More Info | Related Items | Order
|
$17.98 each
(8 Available)
Order
|
| Chip / IC Extractor Tool for ASIC / PLCC Chips Part #: EXT_IC3 Condition: New
Extractor tool for use with PLCC (ASIC) chips. PLCC chips are square chips with legs on all 4 sides, and some are used on many... more
More Info | Related Items | Order
|
$5.95 each
(6 Available)
Order
|
Soldering Irons & Solder:
| Soldering Irons & Solder:
See our Tools & Accessories page for a full listing of soldering irons, solder, and soldering iron kits.
|
Circuit Boards:
| Fliptronics PC Board (Bally/Williams) - Aftermarket Replacement Part #: A-15472 Condition: New
Fliptronics flipper control circuit board. Used in many Bally and Williams games from approx. 1992 - 1996 (see game listing... more
More Info | Related Items | Order
|
$85.00 each
(2 Available)
Order
|
| Bally Solid-State Pinball Fuse/Rectifier Board (1981-1985) Part #: BPS054 Condition: New
New aftermarket replacement fuse/rectifier board for solid-state Bally and Bally/Midway pinball games made from Dec. 1980... more
More Info | Related Items | Order
|
$111.25 each
(2 Available)
Order
|
| Bally / Stern Early Solid-State Pinball Fuse/Rectifier Board Part #: BSPS018 Condition: New
New aftermarket replacement fuse/rectifier board for early solid-state Bally and Stern pinball games. Replaces original Bally... more
More Info | Related Items | Order
|
$79.95 each
(2 Available)
Order
|
| Relay Snubber Board Assy, 24 Volt Part #: C-11232R Condition: New
Relay board for controlling coils (A/C select relay), motors, and/or general illumination lights, as used in many Bally and... more
More Info | Related Items
|
$39.95 each
Currently Unavailable more info...
|
| Opto Board, 1-Bank Drop Target Assembly (Williams) Part #: C-11903-R Condition: New
NOS factory-original opto PC board for single drop target assemblies as used on many mid-1980s & up Williams games. Hard to... more
More Info | Related Items | Order
|
$29.95 each
Order
|
| Opto PC Board, 1-Bank Drop Targets w/ Right-Side Connector (Bally/Williams) Part #: C-13311-R Condition: New
Small opto PC board for single drop target units with right-side connector. Used on many Bally/Williams solid-state games.... more
More Info | Related Items
|
$32.50 each
Temporarily out. Please check back. more info...
|
| Sega / Stern Pinball Dot Matrix Display Power Supply PCB Part #: 520-5138-00 Condition: New
Power supply PCB assembly for Sega and Stern Whitestar and SAM pinball games that use ... more
More Info | Related Items | Order
|
$79.95 each
(1 Available)
Order
|
| Opto Transmitter/Receiver Amplifier PC Board (Stern) Part #: 520-5239-01 Condition: New
Opto transmitter/receiver PC board used in later-model Stern Pinball games. Runs 2 pairs of optos. Replaces earlier part #... more
More Info | Related Items | Order
|
$19.95 each
(3 Available)
Order
|
Cable Ties (Tie Wraps):
| Nylon Cable Ties:
New nylon cable ties. Keep the wiring in your game clean, neat, and out of the way of dangerous moving parts! In original factory clear/white color to match the originals in your game.
|
Length: |
Part #: |
Price: |
Order: |
4 Inch
| TIEWRAP4
| $0.07 each | Order
|
8 Inch
| TIEWRAP8
| $0.14 each | Order
|
|
|
Heat Shrink Tubing:
| Heat Shrink Tubing Kit - 127 Pieces Part #: HS_KIT Condition: New
BIG 127 Piece Set! This handy shrink tubing kit includes seven different sizes of tubing from 5/64 inch to 1/2 inch, in... more
More Info | Related Items | Order
|
$11.95 each
Order
|
Heat Sinks & Accessories:
| Heat Sink, Triac - WPC Power/Driver Board (Bally/Williams) Part #: 5705-12638-00 Condition: New
Heat sink for general-illumination triacs, as used on Bally/Williams WPC power/driver boards. Mounts to triac and helps... more
More Info | Related Items | Order
|
$8.95 each
Order
|
| Heat Sink for TO-220 Regulator / Amplifier / Transistor Part #: HS-TO-220 Condition: New
Small heat sink designed to fit on PC boards behind TO-220 style transistor, amplifier, or regulator. Can also be used on top... more
More Info | Related Items | Order
|
$3.49 each
Order
|
| Heat sink, Q20 - Solenoid / Regulator Board (Bally/Stern) (USED) Part #: U177 Condition: Used
Large heat sink used in upper right corner on solenoid/regulator PC board in Bally and Stern solid-state pinball games,... more
More Info | Related Items | Order
|
$7.50 each
(4 Available)
Order
|
| Heat sink, Q21 - Solenoid / Regulator Board (Bally/Stern) (USED) Part #: U440 Condition: Used
Small heat sink used in upper left corner on solenoid/regulator PC board in Bally and Stern solid-state pinball games,... more
More Info | Related Items | Order
|
$7.50 each
(1 Available)
Order
|
| Heat Sink Compound Part #: HSCOMP Condition: New
6.5 gram tube of white heat sink grease (thermal paste). Used to assure proper heat transfer between semiconductor component... more
More Info | Related Items | Order
|
$5.65 each
(6 Available)
Order
|
Wire & Cable:
| Lamp Socket Braided Wire - 15ft Roll Part #: 462148 Condition: New
15 foot roll of 16-gauge braided uninsulated wire as used for stationary lamp sockets on bottom side of playfields and insert... more
More Info | Related Items | Order
|
$3.49 each
Order
|
Other / Miscellaneous Items:
| Power EMI Line Filter Part #: 150-5000-00 Condition: New
Grounded line EMI filter for main line power, as used in most all makes/models of electronic pinball and video games 1977-up.... more
More Info | Related Items | Order
|
$15.49 each
Order
|
| DeoxIT Anti-Oxidant Compound D100L Part #: D100L Condition: New
Great for improving connections. It's what we use! We use DeoxIT anti-oxidant compound in our shop all the time on all... more
More Info | Related Items | Order
|
$5.95 each
Order
|
| Heat Sink Compound Part #: HSCOMP Condition: New
6.5 gram tube of white heat sink grease (thermal paste). Used to assure proper heat transfer between semiconductor component... more
More Info | Related Items | Order
|
$5.65 each
(6 Available)
Order
|
| Starter for Fluorescent Lamp 14-20 Watt Part #: FS2 Condition: New
New starter for 14-, 15-, and 20-watt fluorescent lamps as used in most video games, newer pinball games, and some pinballs... more
More Info | Related Items | Order
|
$2.49 each
Order
|
| Ballast - Fluorescent Lamp, 120v (1 Lamp) Part #: BALLAST24 Condition: New
120 volt ballast, 60Hz, used to run one (1) fluorescent lamp 18 to 24 inches in length, 12 to 22 watts. Can be used in most... more
More Info | Related Items | Order
|
$21.95 each
(18 Available)
Order
|
|