Quick Links:
- Home Page
- Pinball Machines
- Video & Other Games
- Pinball Buyer's Guide
- Game Sales Info
- Game Parts & Supplies
- Ordering Info
- Contact Us
- What's new this week?
> General Parts & Supplies
> Flipper Parts
- Lighting
- Pop Bumper Parts
- Rubber Rings & Kits
- Game-Specific Parts
- Game Hardware
- Plastics & Decals
- Electronic Parts
- Coils (Solenoids) & Coil Parts
- Paperwork Items
- Bargain Basement
- Video & Other Parts/Supplies
- ROM Chips & Upgrades
- Technical Articles
- Game Service & Repair
- Ordering Info
- Contact Us
- Site Map
|
Information on this page is subject to change without notice, and may not necessarily be current. All prices are in US Funds.
 | Pinball:
Flipper Parts
|
 Flipper Rebuild Kits:
 |
Flipper Rebuild Kits:
Worn out flipper mechanical parts are the leading cause of WEAK and SLOPPY flippers! Bought a game that won't get the ball up the ramps? You probably need a flipper rebuild!
Click the corresponding links in the table below for kit details and picture/listing of kit contents.
KIT INSTRUCTIONS: Some kits we sell include installation instructions (as noted below). SOME DO NOT. We do not provide technical assistance for repair of your game. Parts we sell are sold on the assumption that you "know what you're doing". If you need technical assistance, consider the online repair guides at pinrepairs.com, pinrepair.com or homepinballrepair.com. Or if you are in our local area we may be able to do the work for you.
|
| Manufacturer: |
Kit Type: |
Kit Does #
of Flippers: |
Image/
Contents: |
Part #: |
Price Each: |
Order: |
| Bally |
Late EM / Early SS Games (May 1975 - Apr 1980):
LEFT FLIPPER KIT
Hi Deal through Space Invaders
Click here for a list of games that use this kit. |
For
1
Flipper
(left only) |
Click for info |
FLKIT7-L |
$24.03 |
|
| Bally |
Late EM / Early SS Games (May 1975 - Apr 1980):
RIGHT FLIPPER KIT
Hi Deal through Space Invaders
Click here for a list of games that use this kit. |
For
1
Flipper
(right only) |
Click for info |
FLKIT7-R |
$24.03 |
|
Bally
Bally/Midway |
Late Solid-State Games (Mid-1980 - Early 1988):
LEFT FLIPPER KIT
Skateball through Truck Stop (some exceptions)
For linear-style flipper assemblies. Includes instructions.
Click here for a list of games that use this kit. |
For
1
Flipper
(left only) |
Click for info |
FLKIT6-L |
$47.18 |
|
Bally
Bally/Midway |
Late Solid-State Games (Mid-1980 - Early 1988):
RIGHT FLIPPER KIT
Skateball through Truck Stop (some exceptions)
For linear-style flipper assemblies. Includes instructions.
Click here for a list of games that use this kit. |
For
1
Flipper
(right only) |
Click for info |
FLKIT6-R |
$47.18 |
|
| Bally/Williams |
Games from 1985-1991:
High Speed through Gilligan's Island
Orig. Mfr. Part # A-13524-1
NOTE:Will not fit on Bally/Midway solid-state games with
older "linear" flipper design- use FLKIT7-L or FLKIT7-R above.
Click here for a list of games that use this kit. |
For
2
Flippers
(1 left, 1 right) |
Click for info |
FLKIT1 |
$32.95 |
|
| Bally/Williams |
Same as above, but LEFT SIDE kit only.
Does 1 LEFT flipper.
|
For
1
Flipper
(left only) |
Click for info |
FLKIT1-L |
$16.95 |
|
| Bally/Williams |
Same as above, but RIGHT SIDE kit only.
Does 1 RIGHT flipper.
|
For
1
Flipper
(right only) |
Click for info |
FLKIT1-R |
$16.95 |
|
| Bally/Williams | Fliptronics Games (1992-1999):
Addams Family through Cactus Canyon
Orig. Mfr. Part # A-13524-8
Click here for a list of games that use this kit. |
For
2
Flippers
(1 left, 1 right) |
Click for info |
FLKIT2 |
$31.95 |
|
| Bally/Williams |
Same as above, but LEFT SIDE kit only.
Does 1 LEFT flipper.
|
For
1
Flipper
(left only) |
Click for info |
FLKIT2-L |
$16.49 |
|
| Bally/Williams |
Same as above, but RIGHT SIDE kit only.
Does 1 RIGHT flipper.
|
For
1
Flipper
(right only) |
Click for info |
FLKIT2-R |
$16.49 |
|
Chicago
Gaming Co. | Vacation America Pinball | For
2
Flippers
(1 left, 1 right) |
Click for info |
FLKIT2 |
$31.95 |
|
| Data East | Early Games 1987-1988:
Laser War, Secret Service, Time Machine, Torpedo Alley
KIT DOES ONE FLIPPER - LEFT OR RIGHT | For
1
Flipper
(left or right) |
Click for info |
FLKIT5 | $28.38 |
|
| Data East | Early Electronic Flipper Games 1989 - early 1992:
Robocop through Hook
KIT DOES ONE FLIPPER - LEFT OR RIGHT
Click here for a list of games that use this kit. | For
1
Flipper
(left or right) | 
Click for info | FLKIT3 | $24.88 |
|
| Data East | Mid Electronic Flipper Games late 1992 - mid 1993:
Lethal Weapon 3 through Jurassic Park
KIT DOES ONE FLIPPER - LEFT OR RIGHT
Click here for a list of games that use this kit. | For
1
Flipper
(left or right) | 
Click for info | FLKIT4 | $26.95 |
|
Data East
& Early Sega | Late Electronic Flipper Games late 1993 - early 1995:
Last Action Hero through Baywatch
KIT DOES ONE FLIPPER - LEFT OR RIGHT
Click here for a list of games that use this kit. | For
1
Flipper
(left or right) | 
Click for info | FLKIT11 | $31.94 |
|
Late Sega
& New Stern
(Late Model) | Games from 1995-present:
Sega Batman Forever to present Stern
LEFT side kit. Orig. Mfr. Part # 500-6307-10
Click here for a list of games that use this kit. | For
1
Flipper
(left only) |
Click for info |
500-6307-10 | $33.95 |
|
Late Sega
& New Stern
(Late Model) | Games from 1995-present:
Sega Batman Forever to present Stern
RIGHT side kit. Orig. Mfr. Part # 500-6307-00
Click here for a list of games that use this kit. | For
1
Flipper
(right only) |
Click for info |
500-6307-00 | $33.95 |
|
| Stern (Early) | Games from 1977-1985:
LEFT FLIPPER KIT
Click here for a list of games that use this kit. | For
1
Flipper
(left only) | 
Click for info |
FLKIT10-L | $33.75 |
|
| Stern (Early) | Games from 1977-1985:
RIGHT FLIPPER KIT
Click here for a list of games that use this kit. | For
1
Flipper
(right only) |
Click for info |
FLKIT10-R | $33.75 |
|
| Williams | Games from 1969-1979:
LEFT FLIPPER KIT
Late electro-mechanical through early solid-state.
Click here for a list of games that use this kit. | For
1
Flipper
(left only) |
Click for info |
FLKIT8-L | $26.25 |
|
| Williams | Games from 1969-1979:
RIGHT FLIPPER KIT
Late electro-mechanical through early solid-state.
Click here for a list of games that use this kit. | For
1
Flipper
(right only) |
Click for info |
FLKIT8-R | $26.25 |
|
| Williams | Games from 1980-1983:
LEFT FLIPPER KIT
Electronic (solid state) games from 2/1980 - 8/1983.
Click here for a list of games that use this kit. | For
1
Flipper
(left only) |
Click for info |
FLKIT9-L | $20.87 |
|
| Williams | Games from 1980-1983:
RIGHT FLIPPER KIT
Electronic (solid state) games from 2/1980 - 8/1983.
Click here for a list of games that use this kit. | For
1
Flipper
(right only) |
Click for info |
FLKIT9-R | $20.87 |
|
Not sure which kit you need? E-mail us and we can tell you!
Flipper Assemblies and Baseplates:
Click to enlarge |
Flipper Assembly, Bally/Williams Games
 | SHIPPING: Large/heavy item. Shipping outside the U.S. may require additional cost, due to size/weight (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote. |
Complete baseplate and mechanism assembly for left or right side flippers- as used on Bally/Williams games, but can also be used on other makes/models as a retrofit. Direct replacement for Bally/Williams flippers on games from approx. 1986-up. Will also replace earlier-style flipper assemblies on Williams games from 1980-1985.
These units are great for replacing/upgrading old obsolete flipper assemblies on older games and games from other manufacturers (Stern, Game Plan, Bally, etc) where old original replacement parts are difficult, expensive, or impossible to find. See our Flipper Assembly Upgrade article on our Technical Articles page for info on fitting these flipper assemblies on an older game.
Flipper bat/shaft and coil not included- order flipper bats separately below, and coils from our Coils (Solenoids) page- depending on the color of flippers you prefer, and type of coil your game uses. Any of the long coils (approx. 2 inch) can be used on this unit, including Data East 090-5020-30 & 090-5032-00, Bally/Williams FL-11753, FL-11722, FL-11630, FL15411, FL11629, FL17636, Williams SFL-19-400/30-750-DC, SFL-23-600/30-2600-DC. Short flipper coils on older games can be used on this assembly as well, but it requires you to move the front coil mounting bracket back, and drill/tap new screw holes for it, to accomodate the shorter coil. Modifications like this are not included and are done at your own risk.
This baseplate design includes and uses most parts in the Bally and Williams flipper rebuild kits listed above (kits # FLKIT1 and FLKIT2), plus flipper bushing, nuts, screws, rubber bumper, and front coil plunger guide/bracket.
|
EARLY GAMES
(with HIGH voltage EOS switch):
| Side: |
Part #: |
Price: |
Order: |
| LEFT | FLASSY1_L | $31.95 |
|
| RIGHT | FLASSY1_R | $31.95 |
|
LATER GAMES
(with LOW voltage EOS switch):
| Side: |
Part #: |
Price: |
Order: |
| LEFT | FLASSY2_L | $31.95 |
|
| RIGHT | FLASSY2_R | $31.95 |
|
Not sure which assembly your game should use? Just e-mail us with the name of your game.
|
|
 |
Flipper Baseplate, Bally/Williams Games:
| SHIPPING: Large item. Shipping outside the U.S. may require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote. |
Modern replacement flipper mounting baseplate unit for Bally and Williams pinball games. This baseplate is a direct replacement for any game that used the baseplate with the removable coil stop (Williams games from approx. 1985-up, and Bally games from approx. 1988-up). Some other models (earlier games too) may also use this style of baseplate. Please verify that your game uses this type before ordering.
These baseplates will also replace Bally/Williams part #'s B-13104-L, B-13104-R, C-11627-L, and C-11627-R. This baseplate design will accept all parts in the Bally and Williams flipper rebuild kits # FLKIT1A and FLKIT2A listed above.
Baseplate only- no hardware attached. All other parts must be purchased/obtained separately, or swapped over from old unit.
NOTE: Mounting hole for rubber bumper at front of assembly is too large on these aftermarket replacement baseplates (we have notified the manufacturer and hope to see this corrected). Your original bumper, or replacement bumper (#545-5105-00 below) will not stay in place when mounted. We recommend using some rubber cement to affix the bumper to the baseplate to help keep it in place.
|
| Side: |
Part #: |
Price: |
Order: |
| LEFT | C-16103-L | $11.40 |
|
| RIGHT | C-16103-R | $11.40 |
|
|
|
Click to enlarge |
Williams Flipper Baseplates - 1980-1986 Games (Used):
We have several original used baseplate units available for Williams pinball games from approx. 1980 to 1986. This is the unique flipper baseplate style that has the coil stop built-in. These have been discontinued since the late 1980's and very hard to find in good condition.
Please see our Used Playfield Parts page for full listing with details and prices.
|
 |
Flipper EOS Switch Mounting Bracket: $1.50 ea
Part # 01-9375
Vertical tab/bracket that mounts on flipper baseplate and holds EOS (end of stroke) switch. Also secures end of flipper plunger return spring (side-mount spring # 10-364). Removable tab (mounting screws not included)- used on flipper baseplates in later-model Bally & Williams games, approx. 1990-up.
|
Flipper Coil Stops:
 |
Flipper Coil Stop- Late Model Bally/Williams Games- $3.00 ea.
For later-model games- 1986-up
Part # A-12390
Also replaces older style stop part # A-12111. Flipper coil stop for use on Williams games with removable coil stop- approx. 1986-up. Also used on later-model Bally games approx 1988-up that use the same style flipper assembly. Commonly-worn part on most games that can cause weak flippers or sticking flippers.
|
 |
Flipper Coil Stop- Sega & new Stern Games- $6.05 ea.
Part # 515-6308-01
Flipper coil stop for use on Sega and modern Stern games. Commonly-worn part on most games.
|
|
Flipper Coil Stop- Data East Games- $6.46 ea.
Part # 515-5346-00
Flipper coil stop for use on Data East and Sega games (through Batman Forever) with large coil stop screws. For use on games using flipper assembly # 500-5606-74 (left) and # 500-5606-73 (right) and/or baseplate # 515-5077-01 (left) and # 515-5077-02 (right). Commonly-worn part on most games. Also replaces Data East # 515-5086-00 and # 515-5346-12.
|
 |
Flipper Coil Stop- Bally EM/SS Games- $8.95 ea.
For Bally EM and SS games, approx. 1968 through 1987
Part # A-613-127
New coil stop- fits all Bally flippers in games from approx. 1968 through 1987- both old style with link/crank, and newer 'linear' style flippers introduced in 1981. Also replaces Bally # A-613-67 (below).
|
 |
Flipper Coil Stop- Williams EM/early SS Games- $5.95 ea.
For Williams EM and early SS games, approx. 1965-1979.
Part # A-8143
New coil stop- fits on all Williams flippers used in games from approx. 1965 through 1979. Also replaces Data East # 515-5088-00.
|
 |
Flipper Coil Stop Screw/Washer Set- $1.00 ea.
Use with A-12390 and 515-6308-01 above.
For most Williams and late-model Bally pinball games...
Part # HWR42SET
Allen-head machine screw and lock washer set for use on flipper coil stop. Standard Bally/Williams parts, but also works great on some other makes/models, too. 2 screws and 2 lock washers per set- secures one (1) coil stop. Replace anytime you rebuild your flippers or replace the coil stop.
|
 |
Flipper Coil Stop Screw: 50¢ each
Use with 515-5346-00 above.
For Data East, Sega, and Capcom games...
Part# HWR48
Phillips-head screw for securing coil stop on flipper assemblies used in most Data East, Sega, and Capcom pinball games. 1/4-20 x 3/8" threads. Replaces Data East # 237-5861-00 and Capcom # SC00169-26. Two of these are used to secure the coil stop on one flipper assembly. Reference Data East flipper assembly #'s 500-5606-71 (right) and 500-5606-72 (left).
|
 |
Flipper Coil Stop Screw Set: 25¢ each
Use with A-613-127 and A-613-67 above.
For Bally EM and SS games...
Part# HWR26x2
Correct black Phillips-head screws (2) for securing one (1) coil stop on flipper assembly in Bally electro-mechanical games up through early solid state (approx. 1965-1987). Set includes 2 screws which will secure 1 coil stop.
|
 |
Flipper Coil Stop Screw Set: 50¢ each
Use with A-8143 above.
For Williams EM and early SS games...
Part# HWRKIT2A
Set of two Phillips-head screws and accompanying nuts for mounting coil stop and coil plunger guide brackets on Williams flippers in electro-mechanical games and early solid-state games- approx. 1965 through 1979. Set includes 4 pieces which will do 1 coil stop (or 1 coil plunger bracket).
|
Flipper Plungers, Links, Cranks:
 |
Plunger & Link- $3.95 ea.
New Style- Later-Model Bally & Williams Games
Part # A-15847
Replacement flipper plunger & plastic link as used on later-model Bally & Williams games (early 1990's & up). Includes coil plunger # 02-4219, link # 03-8753, and # 20-9370-1 roll pin. Will also fit other makes/models including Data East, Sega, and new Stern pinball games.
|
 |
Plunger & Link- $5.95 ea.
Old Style- Earlier-Model Bally & Williams Games
Part # A-10656
Replacement flipper plunger & tapered plastic link as used on Bally & Williams games (early to mid 1980's). Includes coil plunger # 02-4219, link # 03-8050-1, and # 20-9370-1 roll pin. Will also fit other makes/models including Data East, Sega, and new Stern pinball games.
|
 |
Plunger & Link: $10.95 ea.
Old Style- Earlier-Model Williams Games
Part # A-6939-1
Replacement flipper plunger & tapered/notched link as used on later-model electromechanical and early solid-state Williams games (through December 1979). Includes coil plunger # 02-3407, link # 01-4603-1, and # 20-8716-5 roll pin. May also fit some other makes/models as well.
|
 |
Plunger & Link - Stern Solid-State Games: $5.49 ea.
Part # A-633
Replacement flipper coil plunger & tapered plastic link as used on early Stern solid-state pinball games approx. 1977-1985. May be used on some earlier Stern and Chicago Coin electro-mechanical models, too.
|
 |
Plunger, Link, & Crank Assembly New Style- For Bally/Williams games
Replacement flipper plunger, link, and crank assembly as used on later-model Bally & Williams games (early 1990's & up). Can be used on earlier games too (some modification may be required on early solid-state games). Will also fit other makes/models including Data East, Sega, and new Stern pinball games.
|
| Side: |
Part #: |
Price: |
Order: |
| Left | A-15848-L
Also replaces B-13882-L | $7.95 ea |
|
| Right | A-15848-R
Also replaces B-13882-R | $7.95 ea |
|
|
|
 |
Plunger/Link/Crank Assembly - Data East & Early Sega: $16.95 ea.
Data East & Early Sega Games
Part # 515-5051-00
Plunger/link/crank assembly with EOS switch tab, as used on Data East and early Sega pinball games.
|
 |
Flipper Crank, LEFT - Bally EM/SS Games: $11.95 ea. - Bally games Oct. 1975 - Mar. 1980 -
Part # A-3711-2
Left side flipper crank and pawl, as used on Bally electro-mechanical (EM) and solid-state (SS) games from October 1975 (Hi-Deal) through March 1980 (Space Invaders) Use with A-3714-3 plunger below.
|
 |
Flipper Crank, RIGHT - Bally EM/SS Games: $11.95 ea. - Bally games Oct. 1975 - Mar. 1980 -
Part # A-3711-3
Right side flipper crank and pawl, as used on Bally electro-mechanical (EM) and solid-state (SS) games from October 1975 (Hi-Deal) through March 1980 (Space Invaders) Use with A-3714-3 plunger below.
|
 |
Plunger & Link - Bally: $7.50 ea. Bally games ~1975-1981
Part # A-3714-3
Flipper plunger & bakelite link as used on Bally electro-mechanical (EM) and solid-state (SS) games from October 1975 (Hi-Deal) through March 1980 (Space Invaders). Also replaces A-3714-1.
Measures 2-5/8 inches overall length. Bakelite link measures 1-1/8 inch long, 7/8 inches wide, 1/8 inch thick. Small hole (for roll pin) is 1/8 inch diameter. Large hole is 7/32 inch diameter. 9/16 inch between holes, center-to-center.
|
 |
Flipper Crank, Left - Bally/Midway Linear: $21.00 ea. Bally/Midway games ~1981-1988
Part # A-3711-4
Left side flipper crank and pawl with nylon bushing, as used on Bally and Bally/Midway games from approx. 1981-1988. Use with S-496-217 plunger below. Replaces Bally # A-360-38, A-3711-4 and Midway # A360-00038-0000.
|
 |
Flipper Crank, Right - Bally/Midway Linear: $21.00 ea. Bally/Midway games ~1981-1988
Part # A-3711-5
Right side flipper crank and pawl with nylon bushing, as used on Bally and Bally/Midway games from approx. 1981-1988. Use with S-496-217 plunger below. Replaces Bally # A-360-39, A-3711-5 and Midway # A360-00039-0000.
|
 |
Linear Style Flipper Plunger - Bally/Midway: $7.50 ea. Bally/Midway games ~1981-1988
Part # S-496-217
Slotted flipper coil plunger used on linear-style flipper assemblies, used in Bally & Bally/Midway games from approx. 1981 through about 1988, including Eight Ball Deluxe, Flash Gordon, Medusa, Eight Ball Champ, and many others. Replaces Bally # S-496-217 and Midway # 0360-00718-00XF (360-718).
|
 |
Flipper Crank, Left - Williams (Early): $9.00 ea. Williams games 1970's - early 1980.
Part # A-4962-L
Left side flipper crank and pawl, as used on Williams electro-mechanical and solid-state games during the 1970's and into early 1980. Replaces A-4962-L and A-4962-1L.
|
 |
Flipper Crank, Right - Williams (Early): $9.00 ea. Williams games 1970's - early 1980.
Part # A-4962-R
Right side flipper crank and pawl, as used on Williams electro-mechanical and solid-state games during the 1970's and into early 1980. Replaces A-4962-R and A-4962-1R.
|
 |
Flipper Link- 90¢ ea.
New Style- Later-Model Bally & Williams Games
Part # 03-8753
Replacement plastic linkage for flipper plunger/crank on later-model Bally/Williams games from late 1980's through 1999. Commonly worn or broken on most used games. Will also fit other makes/models including Data East, Sega, and new Stern pinball games.
Measures 1-5/16 inches long, 23/32 inches wide, 3/16 inches thick. Small hole is 5/32 inch diameter. Large hole is 5/16 inch diameter. Approx. 3/4 inch between holes, center-to-center.
|
 |
Flipper Link- $1.23 ea.
Old Style- Earlier-Model Bally & Williams Games
Part # 03-8050-1
Replacement tapered plastic linkage for flipper plunger/crank on earlier-model Bally/Williams games. Commonly worn or broken on most used games. Also replaces Williams 03-8050.
Used on Bally games from late 1980's through 1999. Used on Williams games from approx. 1985 through 1999. Will also fit other makes/models including Data East, Sega, and new Stern pinball games.
Measures 1-5/16 inches long, 3/4 inches wide, 5/32 inches thick. Small hole is 5/32 inch diameter. Large hole is 5/16 inch diameter. Approx. 3/4 inch between holes, center-to-center.
|
 |
Flipper Link- $1.00 ea.
For late-model Stern games
Part # 545-5611-00
Replacement plastic flipper plunger linkage. For late-model Stern pinball games. Commonly worn or broken on most used games. Replaces Data East, Sega, Stern #'s 545-5611-00, 545-5401-00, and 530-5570-00.
Measures 1-5/16 inches long, 3/4 inches wide, 5/32 inches thick. Small hole is 5/32 inch diameter. Large hole is 5/16 inch diameter. Approx. 3/4 inch between holes, center-to-center.
|
 |
Flipper Link- $1.00 ea. - SOLD OUT - Discontinued -
For late-model Stern games
Part # 545-5611-00LG
Replacement plastic flipper plunger linkage with large diameter hole on plunger end. For late-model Stern pinball games. Commonly worn or broken on most used games.
|
 |
Flipper Link Bushing- 95¢ ea.
For Bally/Williams games
Part # 02-4676
Replacement metal bushing for flipper linkage as used on Bally/Williams games from approx. 1985-up.
|
Flipper Bats & Shafts:
 |
Flipper Bat & Shaft- Yellow- $4.45 ea.
Part # 515-5133-06-06
New heavy-duty design! 3-inch long 1-piece plastic molded flipper bat and metal shaft. This modern flipper has added internal cross-bracing molded-in to increase the strength and durability of the plastic flipper bat. Won't break easily and quickly like earlier versions that were not as strong. Can be used on most makes/models. Replacement for Data East, Sega, and Stern part #515-5133-06-06. Also replaces Bally/Williams part # 20-9250-6 or 20-10110-6 and others.
|
 |
Flipper Bat & Shaft- White- $4.45 ea.
Part # 515-5133-08-06
New heavy-duty design! 3-inch long 1-piece plastic molded flipper bat and metal shaft. This modern flipper has added internal cross-bracing molded-in to increase the strength and durability of the plastic flipper bat. Won't break easily and quickly like earlier versions that were not as strong. Can be used on most makes/models. Replacement for Data East, Sega, and Stern part #515-5133-08-06. Also replaces Bally/Williams part # 20-9250-5 or 20-10110-5 and others.
|
 |
Flipper Bat & Shaft- Short Yellow - Tapered Tip- $6.75 ea.
Part # 515-7191-06
Short style flipper (approx. 2-inch long) as used on many late-model Stern pinball games. Similar to Bally/Williams short flipper # 20-9264-6 but has more of a tapered/pointed tip. Replaces Stern part # 515-7191-06 as used on games like Monopoly, Roller Coaster Tycoon, Simpsons Pinball Party and more. Can also be used for replacement on Bally/Williams part # 20-9264-6 as used on Addams Family, Twilight Zone, Road Show, Judge Dredd, etc. and even old games like Pharaoh and other makes/models. This modern flipper has added internal cross-bracing molded-in to increase the strength and durability of the plastic flipper bat. Won't break easily and quickly like earlier versions that were not as strong. Can be used on most makes/models.
|
 |
Flipper Bat & Shaft- Bally/Williams w/ "W" Logo - White- $6.99 ea.
Part # 20-10110-5
White 3-inch flipper bat with molded-in metal shaft. Original Bally/Williams design with "W" logo surrounded by thick circle on top. Later heavy-duty design for added strength and increased resistance to cracking/breaking. Replaces earlier part # 20-9250-5.
|
 |
Flipper Bat & Shaft- Bally/Williams w/ "W" Logo - Yellow- $6.99 ea.
Part # 20-10110-6
Yellow 3-inch flipper bat with molded-in metal shaft. Original Bally/Williams design with "W" logo surrounded by thick circle on top. Later heavy-duty design for added strength and increased resistance to cracking/breaking. Replaces earlier part # 20-9250-6.
|
|
Flipper Bat & Shaft- Short Yellow - Rounded Tip- $7.43 ea.
Part # 20-9264-6
Short style flipper (approx. 2-inch long) as used on many late-model Bally & Williams pinball games, including Addams Family, Twilight Zone, Road Show, Judge Dredd, etc.. Similar to Sega/Stern short flipper # 515-7191-06 but has more of a rounded tip. Can be used for replacement on Sega/Stern games and other makes/models as well.
|
 |
Flipper Bat & Shaft- White- Bally & Stern Games- $6.00 ea.
Part # A-3994-5
One-piece replacement flipper bat/shaft, as used on Bally and Stern solid-state pinball games, mid-1980's. Can be used to replace 2-piece (shaft/base & cap) units on older games (including earlier electro-mechanical games), or one-piece units on later games. Will work on other makes/models as well. White plastic bat molded to metal shaft.
|
 |
Bally/Stern Flipper Cap- White- $5.00 ea.
SOLD OUT - Discontinued - Use A-3994-5 or 20-10110-5 above.
Part # C-611-5
Replacement plastic white flipper "cap" for standard Bally and Stern 3-inch long flippers. Also fits most Gottlieb games. Cap secures to original metal bat/shaft with screw (not included) from bottom side- requires removal from playfield for replacement.
|
 |
Bally / Williams 2-Inch Flipper Cap Set: $18.00 / set - Temporarily out- please check back... -
Part # A-3739SET
Replacement 2-inch plastic white flipper "cap" set for many Bally and Williams pinball games that used short 2-inch flippers. White plastic with blue lettering. Set includes 1 left flipper cap, and 1 right flipper cap (sorry- not sold separately). Used on many Bally solid-state games, including Flash Gordon, Kings of Steel, Paragon, Space Invaders and more. Also used on many electro-mechanical Bally and Williams games made before 1972. Each flipper has a molded groove which holds a 1" round rubber ring. Cap secures to original metal bat/shaft with screw (not included) from bottom side- requires removal from playfield for replacement. Replaces original Bally part # A-3739, A-3739-1, A-3739-2, C-609-5, C-610-5, and Williams # 3A-7245-L, 3A-7245-R.
|
 |
Gottlieb Flipper Cap- White- $4.95 ea.
Part # C-13150
Replacement plastic white flipper "cap" for standard Gottlieb 3-inch long flippers. Features ridged top edge and holds 1-1/2" dia. x 3/8" tall flipper rubber ring. Can also be used on Bally and Stern games that use similar flippers. Cap secures to original metal bat/shaft with screw from bottom side- requires removal from playfield for replacement.
|
 |
Flipper Bat/Shaft - Black Ridged: $10.49 ea.
Part # 20-9592-7
Black flipper bat/shaft with "ridged" top. Originally used on Bally Party Zone pinball, and possible other Bally games late 1980's and early 1990's. Hard-to-find design.
|
Flipper Springs:
 |
Flipper Coil Plunger Return Spring: 89¢ ea
Part # 266-5047-00
Standard plunger return spring for most makes and models of older games that use a single spring around the coil plunger for the "return spring" on flipper assemblies and other similar devices. Ideal for use on Bally games up to 1980, Williams games up to 1986, and many other makes and models using similar designs. Replacement for Bally # SP-200-19, SP-200-175, SP-200-180, SP-200-189, SP-200-196, SP-200-212, Williams # 10-135, and Data East/Sega/Stern # 266-5047-00.
Can also be used on other similar devices on most games- pop bumpers, kicker bumpers, ball kick-outs, etc.
|
 |
Flipper Coil Plunger Return Spring, Tapered: $1.28 ea - SOLD OUT -
Part # 266-5020-00
Similar to above standard spring, but this spring has a very slight taper to it on one end, making it an ideal replacement, or upgrade, to standard coil plunger springs on flippers on older games.
|
 |
Flipper Coil Plunger Return Spring, Tapered: 72¢ ea
Part # 10-404
Large tapered coil spring for flipper coil plunger. As used on Williams games from 1980-1991 (Firepower through Hurricane), Bally games 1989-1991 (Atlantis through Gilligan's Island), and some Data East games. Also replaces Bally/Williams # 10-376 and Data East # 266-5002-00.
|
 |
Flipper Return Spring, Side-Mount - Bally/Williams WPC Games: 45¢ ea
Part # 10-364
Small side-mounted return spring as used on later-model Bally/Williams "WPC" games 1991-up. Can also be used on earlier games to replace 10-364 spring, with some modifications to other parts for mounting as required.
NOTE: We do not recommend this spring for use on flippers on Gottlieb games or Bally/Midway games with "linear" style flippers (games from approx. 1981-1986). Instead, use spring # 265-5035-00 below.
|
|
Flipper Coil Return Spring, Side-Mount: $1.79 ea
For Data East, Sega, and new Stern games.
Part # 265-5035-00
Replacement side-mounted flipper return spring for late-model Sega and modern Stern pinball games. This spring returns the flipper to it's "low" or "rest" position, and connects between the flipper crank/pawl, and end-of-stroke switch mounting tab. Commonly broken or worn-out on used games. Grab a few for emergency spares!
|
 |
Flipper Coil Return Spring, Side-Mount - Bally/Midway Linear Flippers:
Part # SP-100-363
- Discontinued - listed for reference only - Use 265-5035-00 (above) as replacement
Replacement side-mounted flipper return spring as used on "linear" style flippers as used on many Bally and Bally/Midway solid-state pinball games, approx. 1981-1986. This spring returns the flipper to it's "low" or "rest" position, and connects between the flipper crank/pawl, and baseplate EOS switch mounting bracket.
|
|
Flipper Coil Return Spring, Side-Mount - Gottlieb Games:
Part # A-779
- Discontinued - listed for reference only - Use 265-5035-00 (above) as replacement
Replacement side-mounted flipper return spring as used on most late-model Gottlieb electro-mechanical and some early solid-state pinball games. This spring returns the flipper to it's "low" or "rest" position, and connects between the flipper crank/pawl, and baseplate bracket. Commonly broken or worn-out on used games. Grab a few for emergency spares!
|
Flipper Bushings:
 |
Flipper Bushing- Bally/Williams Games (late): $1.55 ea.
For Williams games 1980-1999, Bally games ~1989-1999.
Part # 03-7568
For early solid-state Williams games (Firepower (1980) and up) and late-model Bally/Williams games (approx. 1989-up). This bushing mounts to the one-piece flipper "baseplate" (B-13104-x, C-8231-x, or C-16103-x) and uses screws and nuts (below) for securing to baseplate. Replacement for factory part #03-7568. Old original bushings are often cracked or broken on most games. They keep your flippers centered properly- from side to side, and up/down. Loose, broken, cracked, or otherwise worn out bushings can cause flippers to be sloppy, lose strength, and possibly contact the playfield surface, causing premature wear. If rebuilding your flippers, don't forget new flipper bushings!
For Bally games made before mid-1989, please consult your game manual to verify part number.
See the Hardware section above for new nuts and screws to mount your new bushings!
|
|
Flipper Bushing- Williams Games (early): $2.50 ea.
For games from Laser Ball (1979) and earlier.
Part # 03-6014
For older electro-mechanical Williams pinball games and early solid-state models up through, and including Laser Ball (December 1979). This is the taller design used on older individual-component-style flipper assemblies which use three studs mounted in the playfield to secure the bushing to the playfield wood. Old original bushings are often cracked or broken on most games. They keep your flippers centered properly- from side to side, and up/down. Loose, broken, cracked, or otherwise worn out bushings can cause flippers to be sloppy, lose strength, and possibly contact the playfield surface, causing premature wear. If rebuilding your flippers, don't forget new flipper bushings!
See the Hardware section above for new nuts to mount your new bushings!
|
|
Flipper Bushing- Bally Games (early): $1.99 ea.
For Bally games from approx. 1975-1988
Part # C-649-53
For Bally pinball games approx. 1975 through 1988 that use the older style flipper assemblies. Replaces Bally part # C-649-53. Used on electro-mechanical and early solid-state pinball games from approx. 1975-1981, and games that used the "linear" flipper design from 1981 to approx. 1988. Used on such games as Capt. Fantastic, Eight Ball, Eight Ball Deluxe, Fathom, Flash Gordon, Night Rider, Playboy, Xenon and many more. Old original bushings are often cracked or broken on most games. They keep your flippers centered properly- from side to side, and up/down. Loose, broken, cracked, or otherwise worn out bushings can cause flippers to be sloppy, lose strength, and possibly contact the playfield surface, causing premature wear. If rebuilding your flippers, don't forget new flipper bushings!
|
 |
Flipper Bushing- Sega/New Stern Games $2.84 ea.
Part #545-5594-00
For late-model Sega and new Stern pinball games. Stern part # 545-5594-00. Old original bushings are often cracked or broken on most games. They keep your flippers centered properly- from side to side, and up/down. Loose, broken, cracked, or otherwise worn out bushings can cause flippers to be sloppy, lose strength, and possibly contact the playfield surface, causing premature wear. If rebuilding your flippers, don't forget new flipper bushings!
See the Hardware section above for new nuts and screws to mount your new bushings!
|
 |
Flipper Bushing- Data East Games: $2.50 ea.
Part #545-5070-00
For Data East pinball games. Part # 545-5070-00. Correct replacement part with two notches on the edge, specifically made to fit Data East games. Old original bushings are often cracked or broken on most games. They keep your flippers centered properly- from side to side, and up/down. Loose, broken, cracked, or otherwise worn out bushings can cause flippers to be sloppy, lose strength, and possibly contact the playfield surface, causing premature wear. If repairing your flippers, don't forget to install new flipper bushings! (Flipper bushings are included with Data East flipper rebuild kits listed above.)
Click here for measurements/dimensions of this part.
See the Hardware section above for new nuts and screws to mount your new bushings!
|
 |
Flipper Bushing Nuts/Screws: $1.00 per bag (12 pcs)
Part # HWRKIT2
Set of 6 nuts and 6 screws for use on most makes and models of games that use machine screws to attach the nylon flipper bushing (above) to metal flipper baseplate. Can be used on early (1980-up) Williams, and late-model Bally/Williams games (1989-up), as well as all Data East, Sega, and new Stern pinballs. This set of 12 pcs. will do two flipper bushings (3 nuts/screws per bushing). Nuts are often missing on most games, and occasionally screws can be stripped or broken off, or missing as well. If rebuilding or repairing your flippers, be sure to replace the nuts and screws on the bushing for a complete job, and added reliability!
|
Flipper Buttons & Switches:
 |
Flipper Buttons:
We carry a variety of flipper buttons in various colors for old games and new.
For a complete listing, please see our Cabinet Parts page.
|
 |
Flipper EOS (End Of Stroke) Switch: $3.50 ea High Voltage / High Current
For use in most makes & models.
Part # 03-7811
Flipper EOS switch with heavy-duty tungsten contact points for older games that use higher voltage/current (25-72vdc). This switch is used on games where flipper coil voltage goes through this switch as part of the coil circuit. Most games made prior to 1992 will use this heavy-duty switch.
Used on Bally/Williams games prior to 1992 (pre-Fliptronics). Replaces # SW-10A-50. Also replaces older Bally # AS2-A20-1 and Data East # 180-5018-00. Can also be used on most all other makes/models of games as a generic replacement (some games may require slight adjustment or repositioning of the EOS switch mounting bracket).
Worn out EOS switch contact points are the main cause of weak or non-functioning flippers. Make sure your flipper button switches are in good shape too (below)- a brand new EOS switch is no good if your flipper button switch is worn out and pitted! Both switches need to be in top condition for best flipper power and performance!
See our Hardware page for switch mounting nuts and screws.
|
 |
Flipper EOS Switch w/Spacer - Normally Open: $7.27 ea For Some Dual-Flipper Games
Part # ASW-A10-45
Secondary (outer) normally-open-contact flipper EOS switch for use on double-stack EOS switch assemblies on some Bally solid-state games where a second (or upper) flipper is controlled by another flipper. Also used on some Midway & Stern solid-state games and possible other makes/models too including some electro-mechanical models. Includes a nylon spacer/actuator that is actuated by the first (normally closed) EOS switch, mounted closest to the coil. Replaces original Bally part # ASW-A10-45, Midway # A365-00046-0000, Stern # SW-481, Williams # SW-1A-183 and possible others.
Used on the following Bally/Midway solid-state games: Beat the Clock, Black Belt, Blackwater 100, BMX, City Slicker, Cybernaut, Dungeons & Dragons, Eight Ball Champ, Eight Ball Deluxe, Elektra, Embryon, Escape From the Lost World, Fathom, Fireball II, Flash Gordon, Grand Slam, Hardbody, Harlem Globetrotters, Hot Doggin', Karate Fight, Kings of Steel, Lady Luck, Motordome, Mr. & Mrs. Pac-Man, Paragon, Party Animal, Power Play, Space Invaders, Spy Hunter, Skateball, Strange Science, Transporter, Truck Stop, Vector
Used on the following Stern solid-state games: Big Game, Catacomb, Cheetah, Dracula, Iron Maiden, Lightning, Meteor, Nugent, Sea Witch, Split Second, Viper
|
 |
Dual Flipper EOS (End Of Stroke) Switch: $13.59 ea - SOLD OUT - Discontinued...
- No longer available. For substitute repplacement, use 1 each of # 03-7811 and # ASW-A10-45 (above), mounted back-to-back. Or use Midway # A365-00046-0000 (below). Any of these may require slight repositioning of original switch mounting bracket.
Part # SW-1010A
Dual flipper EOS switch with heavy-duty tungsten contact points. Used specifically on Williams Flash and Laser Ball for controlling both flippers on the right side of the game. Can be used on other makes/models as well.
|
 |
Dual Flipper EOS (End Of Stroke) Switch: $16.49 ea
Part # A365-00046-0000
Dual flipper EOS switch with heavy-duty tungsten contact points. Used on Bally/Midway games that have 2 flippers on one side of playfield. Can be used on other makes/models as well- some repositioning of switch mounting bracket may be necessary.
|
 |
Flipper EOS (End Of Stroke) Switch: $4.50 ea Low Voltage / Low Current
For Bally/Williams Fliptronics games.
Part # SW-1A-194
Low voltage / low current switch for use on games with solid-state controlled flippers, such as Bally/Williams Fliptronics games, from Addams Family (1992) and up. Can be used on some other makes/models of games that use low-voltage EOS switches for electronically-controlled flippers, or "solid-state-controlled" flippers, as a generic replacement.
These EOS switches are used in low voltage (non coil power) circuits to tell the computer when the flipper has pulled in all the way, and basically tell the computer when to turn on/off high voltage to the coil. Worn out or broken EOS switch contact points can cause weak, overheating, or malfunctioning flippers.
NOTE: This switch should not be used on an older (non-computer-controlled) flipper unit that uses high voltage (25-72vdc). The older flippers use higher voltage and current, which require heavy-duty contact points. Use switch part # 03-7811 (above) for these older games.
See our Hardware page for switch mounting nuts and screws.
|
 |
Flipper EOS (End Of Stroke) Switch With Bend: $4.99 ea
For Data East, Sega, and some late-model Stern games.
Part # 180-5124-01
As used on all solid-state electronic (computer) controlled flippers in late-model Data East, Sega, and some modern Stern pinball games. Overall length of this switch assembly is 2-15/16". Long blade measures 1-11/16" out from switch stack. This switch can also be used on most other makes/models of games that use low-voltage EOS switches for electronically-controlled flippers, as a generic replacement. These EOS switches are used to tell the computer when the flipper has pulled in all the way, and are used to control the current/power to the flipper coils. Worn out or broken EOS switch contact points can cause weak, overheating, or malfunctioning flippers.
See our Hardware page for switch mounting nuts and screws.
NOTE: This switch should not be used on an older (non-computer-controlled) flipper unit that uses high voltage (25-72vdc). The older flippers use higher voltage and current, which require heavy-duty contact points. Use switch part # 03-7811 (above) for these older games. 03-7811 replaces older Data East part # 180-5018-00.
|
 |
Flipper EOS (End Of Stroke) Switch: $3.99 ea
For late-model Stern games.
Part # 180-5149-00
Flipper end-of-stroke switch as used on later-model modern Stern pinball games. Overall length of this switch assembly is 2-11/16". Long blade measures 1-15/32" out from switch stack. These EOS switches are used to tell the computer when the flipper has pulled in all the way, and are used to control the current/power to the flipper coils. Worn out or broken EOS switch contact points can cause weak, overheating, or malfunctioning flippers.
See our Hardware page for switch mounting nuts and screws.
NOTE: This switch should not be used on an older (non-computer-controlled) flipper unit that uses high voltage (25-72vdc). The older flippers use higher voltage and current, which require heavy-duty contact points. Use switch part # 03-7811 (above) for these older games. 03-7811 replaces older Data East part # 180-5018-00.
|
 |
Flipper Lane-Change / Enter Initials Switch Assembly: $4.99 ea
For most makes/models.
Part # SW-1A-150
Replacement switch assembly for "lane change" feature and/or high score "enter initials" feature, as used in many solid-state games, where this switch is manually controlled by the flipper mechanism itself. This low-voltage switch sits behind, or "piggy-backs" onto, the main flipper EOS (end of stroke) switch, and closes when the flipper coil plunger pulls in all the way. It is activated (closed) by the main EOS switch in front of it (closer to the coil). Includes nylon insulator/actuator. Does not include diode- use 1N4007 diode, available above.
See our Hardware page for switch mounting nuts and screws.
|
 |
Flipper Button Opto Board (Type 1): $14.95 each
- DISCONTINUED -
Use A-20207-1 board with 03-9001.1 interrupter below.
Part # A-15878
New aftermarket replacement opto PC board for flipper buttons in early-model Bally & Williams "WPC" games. Replacement for original part # A-15878. Use with your existing metal plate type interrupter (part of original assembly).
The following games used this opto board: Creature From the Black Lagoon, Doctor Who, Dracula, Fish Tales, Judge Dredd (left side only), Twilight Zone, and White Water
|
 |
Flipper Button Opto Board (Type 2): $26.49 each
Part # A-20207.1
Same device as above, but shorter style used on later-model WPC games. Replacement for part # A-20207.1. Can be used with either black, or white plastic interrupters- available below, and also on our General Parts page.
The following games used this opto board: Attack From Mars, Cactus Canyon, Champion Pub, Cirqus Voltaire, Congo, Corvette, Demo. Man, Dirty Harry, Flintstones, Indiana Jones, Indianapolis 500, JackBot, Johnny Mnemonic, Judge Dredd (right side only), Junkyard, Medieval Madness, Monster Bash, NBA Fastbreak, No Fear, No Good Gofers, Popeye, Roadshow, Safe Cracker, Scared Stiff, Shadow, Star Trek: TNG, Tales of the Arabian Nights, Theatre of Magic, WhoDunnit, and World Cup Soccer 94.
Can also be used on earlier games (except Judge Dredd left side) that use the longer/taller opto board and metal interrupter by replacing the entire assembly (board and 03-9001.1 interrupter) together.
|
 |
Flipper Button Opto Interrupter: $5.95 each
Part # 03-9001.1
New replacement plastic interrupter for use on late-model games with flipper opto boards. Bally/Williams part # 03-9001.1. Works in place of original white or black plastic interrupters, and fits on opto board # A-20207.1. See part # A-20207.1 on our Electronic Parts Page for listing of games that use this interrupter.
|
 |
End-of-Stroke (EOS) Switch Tinnerman / Speed Nut: 80¢ each
Part # 20-6516
Tinnerman nut for flipper end-of-stroke (EOS) switch mounting. As used on many makes/models. Replaces Bally/Williams @ 20-6516. Uses #4 sheet metal screw (below).
|
 |
EOS Switch Mounting Screw- 5/8 inch: 14¢ each
Part # HWR46
Mounting screw for single end-of-stroke switch mounting on flipper assembly. Can be used for most makes/models. Use two (2) screws per switch. Used with tinnerman nut 20-6516 (above).
|
 |
EOS Switch Mounting Screw- 3/4 inch: 18¢ each
Part # HWR47
Mounting screw for end-of-stroke switch mounting on flipper assembly. This longer screw can be used with switch stacks using two switches- for dual flippers or "lane change" switch mounted behind EOS switch. Can be used for most makes/models. Use two (2) screws per switch. Used with tinnerman nut 20-6516 (above).
|
 |
Flipper Button Switch, Single Contact, High Voltage: $5.95 ea
Part # SW-10A-48
Single-contact flipper button leaf switch replacement unit with heavy-duty contacts. Direct replacement for Bally/Williams part # SW-10A-48. As used on games that had non-computer-controlled flippers (most pre-1992 games). Can also be used on later-model games that used low-current switch contacts to drive flippers electronically. Measures approx. 3-1/2 inches overall length. May require differently-placed screw mounting holes on games that used a different or shorter switch. Replace your old worn out and pitted flipper button switch contacts, and restore proper current/power flow to your flippers! Don't forget to replace your flipper EOS (end of stroke) switches if they are worn out too!
This switch was used in Bally/Williams switch assembly # A-9990 and A-9900-1. These assemblies came with switch, switch capacitor, and wiring with connector all attached. These assemblies are now discontinued and no longer available.
|
 |
Flipper Button Switch, Dual Contacts, High Voltage: $9.00 ea
Part # SW-1010A-13
Dual-contact flipper button leaf switch replacement unit with heavy-duty contacts. For use on games that use two flippers per side- such as Black Knight, Black Knight 2000, Contact, Grand Lizard, High Speed, Jungle Lord, Pharaoh, and more. Direct replacement for Bally/Williams part # SW-1010A-13 and # SW-1A-192. As used on games with non-computer-controlled flippers (most pre-1992 games). Can also be used on later-model games that used low-current switch contacts to drive flippers electronically. Measures approx. 3-1/2 inches overall length. May require differently-placed screw mounting holes on games that used a different or shorter switch. Don't forget to replace your flipper EOS (end of stroke) switches if they are worn out too!
|
 |
Flipper Button Switch, Single Contact, High Voltage: $7.95 ea
Part # ASW-A10-41
Standard flipper button leaf switch replacement unit with heavy-duty contacts. Can be used as replacement in many makes/models. Replaces original switch in Bally & Stern solid-state pinball games. Replaces original Bally # ASW-A10-23 and ASW-A10-41. Also replaces Gottlieb # B-12642 and B-17838. Measures approx. 3 inches overall length. Replace your old worn out and pitted flipper button switch contacts, and restore proper current/power flow to your flippers! Don't forget to replace your flipper EOS (end of stroke) switches if they are worn out too!
|
 |
Flipper Button Switch, Single Contact, Low Voltage: $16.29 ea
Part # 500-6889-01
Flipper button leaf switch replacement unit with low-voltage contacts. Direct replacement for Stern part # 500-6889-01 and # 180-5160-00. Includes disc capacitor (attached). As used on games that have an electronically-driven flipper system (not for use with high voltage applications where coil is powered directly through switch). Replace your old worn out and pitted flipper button switch contacts, and restore proper current/power flow to your flippers! Don't forget to replace your flipper EOS (end of stroke) switches if they are worn out (listed above). Both switches need to be in top condition to allow proper operation and performance from flippers.
|
 |
Flipper Button Switch, Dual Contacts, Low Voltage: $27.75 ea
Part # 500-6890-01
Flipper button leaf switch replacement unit with low-voltage contacts. Direct replacement for Stern part # 500-6890-01 and # 180-5164-00. Includes disc capacitors (attached). As used on games that have an electronically-driven flipper system (not for use with high voltage applications where coil is powered directly through switch). Replace your old worn out and pitted flipper button switch contacts, and restore proper current/power flow to your flippers! Don't forget to replace your flipper EOS (end of stroke) switches if they are worn out (listed above). Both switches need to be in top condition to allow proper operation and performance from flippers.
|
|
More Switches:
We carry a variety of switches for flippers, including flipper button switches, EOS switches, low and high voltage switches, and more.
For a complete listing, please see our Electronic Parts page.
|
Flipper Coils:
 |
Flipper Coils (Solenoids):
Common coils for most makes/models. See our Coils/Solenoids page for full listing.
|
Coil Sleeves:
 |
Coil Sleeves:
New nylon sleeves for most makes/models. See our Coil Sleeves section for full listing.
|
Flipper Rubber Rings:
 |
Flipper Rubber Rings:
Sold individually by size, or in complete kits for HUNDREDS of games!
Click here to see our Rubber Rings Page for a full listing, with pictures and prices!
|
Flipper Miscellaneous Parts:
 |
Flipper Plunger Bumper / Grommet 60¢ ea
Part# 545-5105-00
Mounts in front hole on flipper assembly and acts as a bumper/rest for flipper coil plunger linkage. Direct replacement for Data East, Sega, and new Stern games, # 545-5105-00. Can also be used on other makes/models. Measures 9/16" diameter and fits in 1/4" hole.
|
 |
Coil / Solenoid Tension Washer: 89¢ ea
For all makes and models.
Part# 269-5002-00
Used on many games to provide tension on front or back of coil to keep the coil firmly in place when mounted. Commonly used on older Bally solid-state games, and later-model Data East, Sega, and Stern pinball games. Will fit/work on any make/model that uses standard size coils. Measures 7/8" outer diameter, 1/2" inner diameter.
|
 |
EOS Switch Capacitor / Spark Suppressor: $2.50 each
Part # CAP2.2UF250V
Metalized polyster axial lead capacitor used across flipper end-of-stroke (EOS) switch to suppress spark and extend life of switch contact points. For most makes/models. Replaces Bally/Williams # 5045-12098-00 and Data East # 125-5002-00.
Secure to mounting tab on flipper assembly using 4-inch nylon cable tie.
SAVE: This item is also available in our Used Parts section.
|
 |
Coil Plunger Nyliner Bushing: $1.25 each
Part # 20-8790-2
Plastic 'nyliner' bushing used in Bally/Midway/Williams games during the early through mid 1980's. This bushing goes on the front bracket/guide for the coil plunger, on "linear" flipper designs that use a single coil plunger and no linkage between the plunger and crank (Eight Ball Deluxe, Xenon, Medusa, Flash Gordon, and many others) Helps keep the plunger centered in the guide and coil. Commonly worn, broken, or missing part on many games.
Replaces Williams # 20-8790-2, Bally # C-537-8, and Midway # 0017-00042-0418.
|
|
Flipper Parts
