Two mini-posts were replaced with larger "sleeve" posts- in front of the left orbit entrance, and to the right of the ramp entrance- to help absorb hard hits from balls (the original mini posts and small rubber rings they use just don't hold up long to ball hits in these spots).
The "beer can" target in the top/center of playfield was replaced with a brand new factory-original unit, including a brand new "Patriot Ale" decal. We also added a strip of clear Mylar around the front of the 'can' to help protect the can and decal from premature wear from ball hits.
The ball kick-out scoop mechanism was reinforced with some extra welding to strengthen the solenoid mounting brackets on it (common weak spot on these units). A new green standup target was also installed next to the scoop shot.
All mechanical assemblies were fully rebuilt and reconditioned during the overhaul, including all flippers fully rebuilt with brand new factory-original parts, drop target banks fully cleaned, overhauled, and rebuilt- including brand new decals for the upper 4-bank targets.
All bop bumpers, slingshot bumpers, kick-out hole mechanism, auto-launcher, kickout-scoop, up-post, and ball trough were also fully overhauled and rebuilt to look and work just like new.
The "Stewie" mini-playfield was also fully overhauled, including full disassembly, playfield cleaning/polishing, and all parts cleaned and overhauled. Even the mini flippers got new rubber rings!
All plastic parts and ramps were also removed and cleaned/reconditioned. A new rubber ring kit was installed, as well as new light bulbs and flasher bulbs, as required. A brand new set of pin balls was also installed (game uses 8 balls total), and the whole reconditioning was topped-off with a brand new sheet of clear tempered safety glass for a scratch-free view of the gorgeous playfield!
Cabinet and Backbox: The outside of the game is in excellent condition, showing very few signs of past use/handling- a very well-preserved game overall. A few tiny spots on the cabinet and backbox were touched-up during the overhaul to help maintain a clean, smooth look, and entire cabinet exterior was cleaned. Main cabinet interior was fully cleaned and cabinet side-walls were repainted in matching original semi-gloss black enamel for a fresh, clean look. All cabinet wiring harnesses were cleaned, as well as coin door- inside and out. A new flourescent tube was installed in the backbox to illuminate the backglass translite. Translite is original in this game and in mint condition with no scratches or scuffs from past use/handling.
Dot-matrix score display is in great condition with no signs of "burn in" from past use (a sign of a low-mileage, well cared-for game). Scores and graphics are bright and crisp with no defects.
Game was also upgraded to the latest 12.0 software revision so it features the latest and greatest updates, changes, and bug fixes.
Custom Modifications:
This machine has had it's software upgraded to the latest 12.0 revision.
Protective Mylar ring installed around center pop bumper to help protect playfield surface from wear/tear.
Post bumpers installed in front of left orbit entrance and right of ramp entrance to help absorb ball hits (much stronger than original mini-post bumpers in these spots).
Protective Mylar strip installed in front of ball kick-out scoop to protect playfield surface.
Stainless steel "Cliffy" protectors installed around scoop hole to protect playfield edges.
Kick-out scoop reinforced with additional welding to strengthen coil mounting bracket.
Protective fender washers added under slingshot plastics to protect against damage.
Upper playfield- view from left. The Stewie "mini playfield" seen here. Note also the brand new stainless steel "Cliffy" protectors installed around the scoop kickout hole, and new green standup target to the left of the scoop.
"Beer can" is brand new- factory original part- including new decal. We've also installed some protective Mylar around the lower part of the decal/can to help protect it from wear/tear from ball hits.
Upper left corner of playfield- Brian, Peter, and Chris figures. New decals have been installed on the 4-bank drop targets.
Note also the two black rubber sleeve posts below the drop targets, and to the right of the ramp entrance. We installed these in place of the small mini-posts that were originally in these locations, for added strength and reliability, as these spots take a lot of hard ball hits and the small mini-posts that are installed at the factory simply don't hold up under the wear/tear. These newly-installed sleeve posts will hold up against fast balls, and help protect valuable playfield parts- a great upgrade!
Upper mini "Stewie" playfield. This is a real, working, "mini" pinball playfield complete with functioning flippers, targets, and a ramp! Hit captive balls on the main playfield to spell P-I-N-B-A-L-L and then hit the scoop to start mini playfield play! Complete targets, loops, and ramp shot to collect family members and light them on the main playfield.
Playfield underside view. Note cleanliness of underside of playfield and parts- all assemblies having been rebuilt/reconditioned and cleaned. Just like when new!
Underside of playfield- mid and upper sections.
Cabinet/Backbox:
Thumbnail (Click for larger view)
Description
Game overall view.
Main cabinet- left side. Cabinet on this game is in outstanding condition- very fresh looking. Only a few very tiny nicks/scratches were present when we received this machine, most of which were touched-up during restoration so they don't appear obvious.
Front of main cabinet. Coin door on this game is original and has been cleaned inside and out- excellent condition. Game can be run on coins, or "free play".
Rear of game. Great condition- like new.
Main cabinet interior. All interior areas and parts have been cleaned, and interior side-walls have been repainted in matching black enamel for a fresh look. Once again looks just like when it came from the factory!
Coin box lid and game manual are also included (not pictured).
Backbox interior. All circuit boards are original and in excellent condition. Game software was upgraded to the latest 12.0 version during restoration. A new flourescent lamp was also added for backglass lighting.
Back of backglass translite. Translite is in mint condition with no blemishes or signs of use/handling. Just like new!
This machine comes complete with fully functional coin door & mechanisms with all parts present and working, and game manual and schematics (wiring diagrams) for this game.
Available for pick-up at our shop. Delivery/shipping available at additional charge.
Pinball Machines for Sale
Game Video: