 |
Red Bullseye Decal for Standup Targets: $1.00 ea.
Part # PDG332
Round adhesive decal for round standup (stationary) targets, featuring red and white "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Williams solid-state pinball games, including Firepower, Space Shuttle, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
 |
Blue Bullseye Decal for Standup Targets: $1.00 ea.
Part # PDG333
Round adhesive decal for round standup (stationary) targets, featuring blue and white "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Williams solid-state pinball games, including Flash, Stellar Wars, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
 |
Blue / Red Bullseye Decal for Standup Targets: $1.00 ea. - As used on vintage Gottlieb games -
Part # PDG368
Round adhesive decal for round standup (stationary) targets, featuring red, white, and blue "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Gottlieb pinball games. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
 |
Red Bullseye Decal for Drop Targets: 75¢ ea.
Part # PDG352
Rectangular adhesive decal for drop targets- red "bullseye" design on white background. Ideal for use on drop targets on older Bally games to replace worn-away original design. Can also be used on other makes/models, too. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Bally solid-state pinball games including Capt. Fantastic, Evel Knievel, KISS, Mata Hari, Night Rider, Six Million Dollar Man, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decal measures 13/16-inch wide by 1-inch high. Diameter of round red bullseye design in center of decal is 11/16-inch. Sold individually.
|
 |
Blue Bullseye Decal for Drop Targets: 75¢ ea.
Part # PDG353
Same as above, but featuring a blue "bullseye" design on white background. Ideal replacement for targets on older Bally solid-state pinball games including Bobby Orr's Power Play, Rolling Stones, Star Trek, and more.
Decal measures 13/16-inch wide by 1-inch high. Diameter of round red bullseye design in center of decal is 11/16-inch. Sold individually.
|
 |
Blue Star Decal for Drop Targets: 75¢ ea.
Part # PDG365
Rectangular adhesive decal for drop targets- blue "star" design on white background. Ideal for use on drop targets on older Bally games to replace worn-away original design. Can also be used on other makes/models, too. This design was originally used on Bally Future Spa and Harlem Globetrotters. Use on any game for a nice new look. Install over the worn-away paint on your original targets for a fresh, new appearance! Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decal measures 13/16-inch wide by 1-inch high. Sold individually.
|
Click to enlarge |
1 thru 5 Drop Target Decal Set: $6.25/set
Part # PDG312
Standard/generic drop target decal set for use on most makes/models of games. Exact replacement for many Stern solid-state games, including Cheetah, Flight 2000, Iron Maiden and more. Includes 5 decals per set, numbered 1 through 5. Black printing on white background, with protective mylar film covering for added protection.
|
Click to enlarge |
1 thru 3 Drop Target Decal Set: $5.00/set
Part # PDG313
Standard/generic drop target decal set for use on most makes/models of games. Includes 3 decals per set, numbered 1 through 3. Black printing on white background, with protective mylar film covering for added protection.
|
 |
Hologram Spinner Decal Sets: $3.00 pair of 2
Great replacement item! 2 sizes and 2 colors available!
Hot new item! Laser-printed "hologram" decals for spinning targets- available in two colors- silver and amber. Two sizes also available- 1-3/8" x 1-1/8" (35mm x 29mm) and 1-1/2" x 1-1/4" (38mm x 32mm). Larger size fits completely across most types of spinners. Smaller size fits within edges of most spinners- such as Star Trek: The Next Generation, and High Speed.
|
|
| Size: |
Color: |
Part #: |
Order: |
1-3/8 x 1-1/8 inch
(35mm x 29mm) |
Silver |
PDG257SS |
|
1-1/2 x 1-1/4 inch
(38mm x 32mm) |
Silver |
PDG258LS |
|
1-3/8 x 1-1/8 inch
(35mm x 29mm) |
Amber |
PDG257SA |
|
1-1/2 x 1-1/4 inch
(38mm x 32mm) |
Amber |
PDG257LA |
|
|
|
 |
Hologram Drop Target Decals: $1.00 ea
Great replacement item! 2 sizes and 2 colors available!
Hot new item! Laser-printed "hologram" decals for drop targets- available in two colors- silver and amber. Two sizes also available- 1-3/8" x 15/16" (24mm x 35mm) and 7/8" x 1-1/32" (22mm x 26mm). Larger size fits most standard drop targets on most makes and models of games (Bally, Williams, older Stern, etc). Smaller size fits Gottlieb, Data East, Sega, and new Stern games.
|
|
| Size: |
Color: |
Part #: |
Order: |
1-3/8 x 15/16 inch
(24mm x 35mm) |
Silver |
PDG260 |
|
7/8 x 1-1/32 inch
(22mm x 26mm) |
Silver |
PDG261 |
|
1-3/8 x 15/16 inch
(24mm x 35mm) |
Amber |
PDG262 |
|
7/8 x 1-1/32 inch
(22mm x 26mm) |
Amber |
PDG263 |
|
|
|
 |
Hologram Round Target Decals: $1.00 ea
Great replacement item! 2 colors available!
Hot new item! Laser-printed "hologram" decals for round stand-up targets- available in two colors- silver and amber. Fits on most makes and models of games! Great replacement item for discontinued or no-longer-available original decals, or neat custom design idea, too!
|
|
| Color: |
Part #: |
Order: |
| Silver |
PDG264 |
|
| Amber |
PDG265 |
|
|
|
 Click to enlarge |
Alvin G. & Co. Cabinet / Shop-Out Decal Set, 11 pcs: $14.95/set
Part # PDG319
NOS factory originals! Cabinet or "shop-out" decal set for use on any Alvin G. & Co. game. Includes 11 pieces, as shown in image at left, and featuring many hard-to-find decals such as test/service button panel decal, high voltage decals, # of balls decals, and more. Replace your worn, damaged, or missing decals with these mint condition factory originals for great looks or as a finishing touch to any shop-out or restoration.
|
 Click to enlarge |
Alvin G. & Co. Coin Door Logo Decal: $6.00 ea
- SOLD OUT -
Part # PDG320
NOS factory original! Original coin door logo decal for use on any Alvin G. & Co. game. Self-adhesive- just peel and stick. Measures approx. 5 inches in width.
|
 Click to enlarge |
Alvin G. & Co. Score Card Holder Decal Set: $12.95/set
Part # PDG321
NOS factory originals! Original score card holder (or "apron") decals for use on any Alvin G. & Co. game. Self-adhesive- just peel and stick. Set includes 2 decals- one left, and one right.
|
 Click to enlarge |
Alvin G. & Co. Score Card Holder Decal- Right Side: $6.95
Part # PDG321-R
NOS factory original! Same as above, but right side decal only.
|
 Click to enlarge |
Alvin G. & Co. High Voltage Decal Set- 4pcs: $9.95/set - SOLD OUT -
Part # PDG322
NOS factory originals! Set of 4 "high voltage" decals for use in cabinet and backbox of any Alvin G. & Co. game. Self-adhesive decals- just peel and stick.
|
 Click to enlarge |
Alvin G. & Co. High Voltage Decal: $3.00 ea
Part # PDG325
NOS factory original! High voltage decal for use in main cabinet or backbox on any Alvin G. game. Can be used on any other make/model as well. Measures approx. 2 inches wide. Self-adhesive decals- just peel and stick.
|
 Click to enlarge |
Alvin G. & Co. Service Decal: $3.00 ea
Part # PDG323
NOS factory original! "Service" reminder decal for use in cabinet of any Alvin G. & Co. game. Self-adhesive decal- just peel and stick. Measures approx. 2 inches in width.
|
 Click to enlarge |
Alvin G. & Co. Number-of-Balls Decal Set- 3pcs: $4.00/set
Part # PDG324
Number-of-balls decal set for use with Alvin G. & Co. game. Can be used on other makes/models as well. Self-adhesive decals- just peel and stick. 3 decals per set, for 1, 2, and 3 balls per game. Each measures approx. 1-1/2 inches in width.
|
 |
Coin Door Pricing Decal Set (2pcs): $3.00/set
Part # PDG316
NOS factory originals! Orange self-adhesive decals (2 per sheet) as used on Bally and Williams games from about 1990-up. Decal of your choice goes between the coin slots on the coin door. Just peel and stick!
|
 |
"Red Diamond" Decal Set (2pcs), Generic- most games: $5.00 pair
Part # PDG245
Standard/generic spinner decal as used on many Bally electro-mechanical and early solid-state pinballs in the 1970's and early 1980's. Includes 2 decals per set- one for front, and one for back.
Can also be used on any other game using same (standard) size spinner!
|
 |
Credit Button (start button) Decal - Chicago Coin Games through 1977: $3.50 ea
Part # PDG282
Reproduction of the original round "Credit Button" decal for Chicago Coin (and Stern) pinball games. Replacement for original part # 12A-144. This decal goes around the white credit, or "start" button on the front of the coin door. Often scratched-up, torn away, or otherwise missing on most of these classic games. Bright white printing (text) on dark blue solid background. Center hole in this new decal is slightly larger than original- to better accomodate the button and access to it- helps prevent unnecessary wear and tearing of the decal. Mylar-coverd for added protection. Reproductions of these have not been available in the past- these won't stay in stock long! Get one for your classic game while they last. Grab a second one for a valuable spare!
|
 |
Silver Hologram Spinner Decal, Generic- most games: $3.00 pair of 2
Part # PDG258
As used on many Gottlieb and Premier games- 1980 and up. 2-piece set of silver 3-D hologram spinner decals- front and back sides.
Can also be used on any other game using same (standard) size spinner!
|
 |
Fuse/Rectifier Board Decal - Stern Games 1977-1985: $5.00 ea
Part # PDG349
Replacement decal for Stern solid-state pinball games. Mounts on the metal mounting plate just above the fuse/rectifier board in the main cabinet- right behind coin box area. Replace your worn, damaged, or missing original label with this great-looking and easy-to-read replacement! Label gives proper voltages for test points, and value/description of fuses used on the rectifier board. Eliminate the guesswork and make your game look great with this new replacement decal! Easy to install- just peel and stick.
|
|
Credit Button (start button) Decal - Stern Games 1977-1985: $3.50 ea
Part # PDG282.
Reproduction of the original round "Credit Button" decal for Stern pinball games, vintage 1977-1985. Replacement for Stern part # 12A-144. This decal goes around the white credit, or "start" button on the front of the coin door. Often scratched-up, torn away, or otherwise missing on most of these classic games. Bright white printing (text) on dark blue solid background. Center hole in this new decal is slightly larger than original- to better accomodate the button and access to it- helps prevent unnecessary wear and tearing of the decal. Mylar-coverd for added protection. Reproductions of these have not been available in the past- these won't stay in stock long! Get one for your classic Stern game while they last. Grab a second one to keep for a valuable spare!
|
 |
Spinner Decal Set, Generic- most early games: $5.00 ea
Part # PDG273.
Standard/generic Stern spinner decal set as used on many early model Stern solid-state pinballs in the late 1970's. Includes 2 decals- blue "arrow" for front of spinner, and red "explosion" for back side.
Can also be used on any other game using same (standard) size spinner!
|
 |
Spinner Decal Set, Generic- most later-model games: $5.00 ea
Part # PDG296
Standard/generic spinner decal set as used on many later-model Stern solid-state pinballs in the late 1970's and early 1980's. Includes 2 decals- red "S" for front of spinner, and blue "stars" for back side. Used on Catacomb, Cheetah, Dragonfist, Flight 2000, Freefall, Iron Maiden, Lightning, Nine Ball, Orbitor 1, Quicksilver, Split Second, Star Gazer, Viper.
Can also be used on any other game using same (standard) size spinner!
|
  |
Drop Target Decal, Generic "S" Logo: 75¢ ea
|
Availble in multiple colors, as listed at right. Design printed on white background. Generic Stern drop target design as used on many solid-state Stern games in the late 1970's and early 1980's. High-quality decal- just peel and stick. Protective mylar coating on front of decal helps protect against premature wear and tear. Will outlast original drop target designs by several years.
|
|
| Color: |
Part #: |
Price: |
Add to Cart: |
| Black | PDG309 | 75¢ |
|
| Blue | PDG297B | 75¢ |
|
| Green | PDG297G | 75¢ |
|
| Red | PDG297R | 75¢ |
|
|
|
  |
Drop Target Decal, Generic "Lightning Bolt": 75¢ ea
|
Availble in multiple colors, as listed at right. Design printed on white background. Generic Stern "lightning bolt" drop target design as used on many solid-state Stern games in the late 1970's and early 1980's. High-quality decal- just peel and stick. Protective mylar coating on front of decal helps protect against premature wear and tear. Will outlast original drop target designs by several years.
|
|
| Color: |
Part #: |
Price: |
Add to Cart: |
| Black | PDG310 | 75¢ |
|
| Blue | PDG298B | 75¢ |
|
| Green | PDG298G | 75¢ |
|
| Red | PDG298R | 75¢ |
|
|
|
Click to enlarge |
1 thru 5 Drop Target Decal Set: $6.25/set
Part # PDG312
Standard/generic drop target decal set for use on most makes/models of games. Exact replacement for many Stern solid-state games, including Cheetah, Flight 2000, Iron Maiden and more. Includes 5 decals per set, numbered 1 through 5. Black printing on white background, with protective mylar film covering for added protection.
|
 |
Stern Coin Door Decal: $6.00 ea. - SOLD OUT -
Part # PDG154.
Decal for center of coin door on Stern pinball and video games from 1977-1985. Silkscreen-printed on high quality clear vinyl (not a cheap ink-jet copy). UV-resistant ink helps prevent fading of bright colors.
Just peel off white paper backing, and apply decal to coin door. Decal is transparent (clear), other than the red and blue lettering.
For use on all Stern pinball, video, and other arcade games from 1977-1985. |
|
Bullseye Target Decal, Round Red: $1.00 ea.
Part # PDG332
Round adhesive decal for standup targets, featuring red and white "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Williams solid-state pinball games, including Firepower, Space Shuttle, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
|
Bullseye Target Decal, Round Blue: $1.00 ea.
Part # PDG333
Round adhesive decal for standup targets, featuring blue and white "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Williams solid-state pinball games, including Flash, Stellar Wars, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
 |
Spinner Decal Set, Early Solid-State Games: $5.00 / set
Part # PDG268
Standard/generic spinner decal set as used on many Williams solid-state pinballs in the 1970's and early 1980's. Incudes 2 decals- red "bullseye" for front of spinner, and blue "explosion" for back side.
Can also be used on any other game using same (standard) size spinner target!
|
|
Coin Door Pricing Decal Set (2pcs): $3.00/set
Part # PDG316
NOS factory originals! Orange self-adhesive decals (2 per sheet) as used on Bally and Williams games from about 1990-up. Decal of your choice goes between the coin slots on the coin door. Just peel and stick!
|
Click to enlarge |
Williams Solid-State Cabinet Ground Warning Decal: $7.95 ea.
Part # PDG354
New Reproduction! Large yellow decal for back of main cabinet on early Williams solid-state pinball games. Gives warning for proper grounding of machine. Often missing or badly worn/damaged on most games. Used on most games 1977 and up. Can be used on any other make/model as well- older or newer. Great finishing-touch for a fixed-up or restored game, or makes a great notice for anyone servicing/repairing the game. Self-adhesive decal- easy to install- just peel and stick!
|
Click to enlarge |
Williams / Bally Lockdown Bar Latch High Voltage Decal: $4.95 ea.
Part # PDG355
This nice looking warning decal mounts on the latch under the front glass lockdown bar on Bally and Williams games, approx. 1990 and up. Can be used on earlier models and other makes as well. Measures approx. 6 inches by 5/8 inch. Easy to install- just peel and stick! Nice finishing touch to a nicely restored game, or great for replacing old stained, worn, or missing decal on any game. |
Click to enlarge |
Williams / Bally Backbox Ground Strap Decal: $1.99 ea.
Part # PDG357
This decal mounts in the backbox on most Williams and later Bally electronic pinball games, near the connection point for the ground strap that comes up from the main cabinet. Usually damaged, torn, stained, or missing on most used games. Make sure you label this critical connection point in your game, as proper grounding is a must! Red printing on white background. Measures approx. 3 inches by 3/4 inch. Easy to install- just peel and stick!
|
Click to enlarge |
Williams 'Tested By' Cabinet Decals: $5.00 / set of 3
Part # PDG358
Set of three yellow 'Tested By' decals for Williams solid-state pinball cabinets. Reproductions of decals originally used at the factory by Quality Control when game was assembled and being tested before shipping. These decals are commonly found on the lockdown bar latch, coin door, and under playfield on most games. Nice finishing touch to a restored game, or replace missing/damaged/stained original decals in your game with these great-looking new replacements! Each decal measurs approx. 1-1/4 inch by 3/4 inch. Easy to install- just peel and stick!
|
Click to enlarge |
Williams Sound Board Test Button Decal: 89¢ ea.
Part # PDG359
Small decal that mounts next to and/or under the test/diagnostic button on sound boards in early Williams solid-state pinball games approx. 1978-1985. Commonly missing or worn/damaged on most used games. This often-overlooked decal makes a nice finishing touch to any nice restoration or simply use to replace your old worn/missing decal. Measures approx. 1 inch by 1/2 inch. Black and red printing on white background. Easy to install- just peel and stick!
|
Click to enlarge |
Williams Flipper Lane Change Switch Decal: $1.49 ea.
Part # PDG360
This decal was used on early Williams solid-state pinball games that had the Lane Change feature activated by right flipper. Decal mounts on the front vertical tab of the right flipper baseplate. Some games that may use this decal are Alien Poker, Blackout, Comet, Cosmic Gunfight, Cyclone, Firepower, Firepower II, Laser Cue, Road Kings, Sorcerer, Space Shuttle, Time Fantasy, Warlok and others. Nice finishing touch to a restored game, or replace your old worn/missing decal with this great-looking new replacement. Measures approx. 1-1/2 inches by 3/4 inch. Easy to install- just peel and stick.
|
Click to enlarge |
Williams Coin Door Test Button Decal: $4.50 ea.
Part # PDG361
This decal covers the mounting panel for the test buttons/switches on the inside of the coin door on Williams solid-state games from approx. 1977-1985. This decal is used for 3-position switch panels, but can be cut short and used on 2-position panels in very early games that used only 2 switches (Hot Tip, World Cup, etc.). Requires cutting-out of switch/button mounting holes. Best way to install is to remove existing buttons/switches, clean old panel, apply decal, cut holes with pen knife, and reinstall buttons. A nice finishing touch to any restored game, or replace your damaged or missing decal with this great looking replacement!
|
Click to enlarge |
Williams Coin Mechanism Decal Set: $7.95 / set
Part # PDG362
This 2-piece decal set mounts on the inside edge of the coin door on early Williams solid-state games from approx. 1977-1983. Decals describe procedure to change coin door price tags and coin mechanisms. Commonly missing, worn, or damaged on most games. Nice finishing touch to any restored game. Easy to install- just peel and stick.
|
Click to enlarge |
Williams Coin Switch Cover Decal: 89¢ ea.
Part # PDG363
This small decal mounts on one (or more) of the plastic coin switch covers in Williams early solid-state pinball games, and reads "Press here to enter credits". The cover can be pressed to activate the coin switch and add credits to the game. Commonly missing in most games. Nice finishing touch to any restoration, or replace your worn/missing decals.
|
Click to enlarge |
Williams Coin Door Interior Decal Set: $14.95 / set
Part # PDG364
5-piece decal set for the interior of coin doors on Williams games approx. 1977-1985. Includes coin tag and mechanism instruction decals, test button decal, credit decal, and inspection decal.
|
Plastics & Decals
Plastics: New, used, custom, and reproduction pieces.
