- All/Most Makes and Models:

	Ball shooter rod/knob: $4.00 ea Units Available: 1 Manufacturer: MANY Factory Part #: A-8833 (Gottlieb), A-100-15 (Bally), 20-9253 (Bally/Williams), 515-6557-00 (Data East, Sega, Stern), A-315-x (old Stern) Our Part #: U27 Condition: Used Description: Ball shooter rod with molded plastic knob. As used on most makes/models. Used unit.
	Ball shooter rod/knob, all metal: $4.00 ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: A-100-7 (Bally), others undetermined Our Part #: U48 Condition: Used Description: Ball shooter rod with metal knob. As used on many makes/models of vintage pinballs. Used unit, sold as pictured.
	Ball shooter rod/knob: $3.00 - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: A-8833 (Gottlieb), 20-9253 (Bally, Williams) Our Part #: U129 Condition: Used Description: Ball shooter rod with metal knob. Type used on Williams electro-mechanical and early solid-state games. Can be used on other makes/models as well. Used part in fair/good condition. Sold as pictured.
	Ball shooter rod w/ red knob: $4.00 - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: A-8833 (Gottlieb), 20-9253 (Bally, Williams), others... Our Part #: U349 Condition: Used Description: Ball shooter rod with red molded plastic knob. Fits most makes/models. Used part in good condition.

- Bally:

	Ball shooter housing cover plate: $2.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: A-3830 Our Part #: U44 Condition: Used Description: Outer metal cover for ball shooter (plunger) housing with built-in threaded studs. Features Bally logo stamped above plunger hole. As used on many Bally electro-mechanical pinball games mid-to-late 1970's, and most Bally solid-state pinball games through late 1980's. Used part- condition varies. May have some light surface rust from storage.
	Ball shooter nylon housing/sleeve: $2.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: C-934 Our Part #: U45 Condition: Used Description: Nylon ball shooter housing/sleeve, as used on many Bally electro-mechanical games mid-to-late 1970's and most solid-state pinball games through late 1980's. Used part, condition/appearance varies.
	Ball shooter housing mounting plate: $2.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: P-5291 Our Part #: U46 Condition: Used Description: Metal mounting plate for ball shooter, as used on many Bally electro-mechanical games from mid-to-late 1970's, and most solid-state games through late 1980's. Used part- may have some light surface rust from storage. Condition/appearance varies.
	Ball shooter (plunger) housing, Bally/Williams games: $9.00 - SOLD OUT - Units Available: 0 Manufacturer: Bally, Williams Factory Part #: 21-6645-1 Our Part #: U116 Condition: Used Description: Ball shooter housing, as used on Williams games late 1960's through 1999, and Bally games approx. 1987-1999. Can also be used as standard replacement for other makes and models as well. Used part in good condition.

- Williams:

Ball shooter (plunger) housing, Bally/Williams games: $9.00 - SOLD OUT - Units Available: 0 Manufacturer: Bally, Williams Factory Part #: 21-6645-1 Our Part #: U116 Condition: Used Description: Ball shooter housing, as used on Williams games late 1960's through 1999, and Bally games approx. 1987-1999. Can also be used as standard replacement for other makes and models as well. Used part in good condition.

- Bally:

	Chime bar: $4.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: Unknown Our Part #: U196 Condition: Used Description: Chime bar from a Bally electro-mechanical or early solid-state game. Measures 5 inches in length. Used part in good condition.
	Chime bar: $4.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: Unknown Our Part #: U226 Condition: Used Description: Chime bar from a Bally electro-mechanical or early solid-state game. Measures just over 6 inches in length. Used part in good condition.
	Chime coil plunger: $5.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: Unknown Our Part #: U243 Condition: Used Description: Short coil plunger with nylon tip as used in Bally chime units. Used part in good condition.

- Williams:

Replay/extra ball bell mechanism: $5.00 ea - SOLD - Units Available: 0 Manufacturer: Williams Factory Part #: C-8461 Our Part #: U137 Condition: Used Description: Coil, switch, and mounting bracket mechanism for replay or extra ball "bell" unit, as used in main cabinet of many Williams solid-state pinball games including Black Knight, Jungle Lord, Space Shuttle and others. Missing bell, but rest of mechanism is present and in good condition.

- All/Most Makes & Models:

Playfield protector bar: $1.00 ea Units Available: 2 Manufacturer: MANY Factory Part #: Unknown Our Part #: U55 Condition: Used Description: Metal bar that mounts on cabinet at rear of playfield. Protects cabinet and playfield from wear when playfield is raised/lowered for service. Commonly used on Bally and Williams pinball games. May fit others as well. Measures 3-1/2 inches long by 5/8 inches wide. Used part, sold as pictured.

Playfield prop rod support bracket: $1.00 ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: Unknown Our Part #: U58 Condition: Used Description: Support bracket that mounts on inside cabinet wall and holds playfield support rod in place when in the lowered position. Used on most makes and models. Used part.

- Bally:

	Bally replay knocker coil bracket: $2.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: P-7378-1 Our Part #: U4 Condition: Used Description: Replay knocker coil mounting bracket, as used in main cabinet on Bally solid-state pinball games. Used, as pictured.
	Playfield support bracket/pivot, left: $3.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: Unknown Our Part #: U38 Condition: Used Description: Playfield support bracket and pivot. Mounts to inside left wall of cabinet. As used on many Bally electro-mechanical games, and some later solid-state models including Medusa. Includes rubber bumper stop. Used part, sold as pictured.
	Playfield support bracket/pivot, right: $3.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: Unknown Our Part #: U33 Condition: Used Description: Playfield support bracket and pivot. Mounts to inside right wall of cabinet. As used on many Bally electro-mechanical games, and some later solid-state models including Medusa. Includes rubber bumper stop. Used part, sold as pictured.
	Leg bolt protector plate (armor): $1.00 ea Units Available: 3 Manufacturer: Bally Factory Part #: P-3914 Our Part #: U34 Condition: Used Description: Metal plate, or "armor" that covers the leg bolts and leg bolt mounting plate on the inside of the cabinet. As used on Bally pinball games. Used part, condition may vary. Sold as is.
	Coin box lock bracket: $2.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: Unknown Our Part #: U53 Condition: Used Description: Metal latch used to lock coin box lid in place. As used on many Bally pinball games, 1970's through mid 1980's. Used part in good condition.
	Bracket, motor board prop rod support: $1.00 ea Units Available: 2 Manufacturer: Bally Factory Part #: Unknown Our Part #: U60 Condition: Used Description: Bracket that holds motor panel support rod in older Bally pinballs from late 1960's including Dogies and others. Used part in good condition.

- Stern:

Leg bolt protector plate (armor): $1.00 ea Units Available: 1 Manufacturer: Stern Factory Part #: Unknown Our Part #: U161 Condition: Used Description: Metal plate, or "armor" that covers the leg bolts and leg bolt mounting plate on the inside of the cabinet. As used on Stern solid-state pinball games 1977-1985. Used part, condition may vary. Sold as is.

- Williams:

	Bracket, coin box centering: $3.00 ea Units Available: 1 Manufacturer: Bally, Williams Factory Part #: 01-6389 Our Part #: 01-6389 Condition: Used Description: Mounts on inside edge of cabinet front and keeps coin box centered under coin door.
	Bracket, backbox mounting: $5.00 ea Units Available: 1 Manufacturer: Williams Factory Part #: 01-6589 Our Part #: 01-6589 Condition: Used Description: Connecting bracket that mounts on back edge of main cabinet "neck" and holds backbox upright before mounting bolts are installed.
	Volume control knob mounting bracket: $2.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Williams Factory Part #: Unknown Our Part #: U217 Condition: Used Description: Metal mounting bracket for volume control knob. As used in Williams solid-state pinball games approx. 1977-1991. Used part in good condition.

- Most/All Makes & Models:

	Flipper button, red, short: 75¢ ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: 500-5026-32 (Data East, Sega, Stern), others undetermined Our Part #: U286 Condition: Used, varies Description: Short flipper button as used on many makes and models. Housing overall length is 1-1/8 inch. Threaded portion of housing is 5/8 inch. Used part, condition varies. This part also available brand new: Click here
	Flipper button, white, short: 75¢ ea Units Available: 6 Manufacturer: MANY Factory Part #: Unknown Our Part #: U381 Condition: Used, Fair to Good Description: Short flipper button as used on many makes and models. Housing overall length is 1-1/8 inch. Threaded portion of housing is 5/8 inch. Used part, condition varies. This part also available brand new: Click here
	Flipper button, white, long: $1.00 ea Units Available: 1 Manufacturer: MANY Factory Part #: Unknown Our Part #: U40 Condition: Used, Fair to Good Description: Long flipper button as used on many Williams solid-state pinball games. Hard to find item. Housing overall length is 1-3/8 inch. Threaded portion of housing is 7/8 inch. Used part, condition varies.
	PAL Nut for pushbutton: $1.00 ea Units Available: 2 Manufacturer: MANY Factory Part #: Undetermined Our Part #: U287 Condition: Used Description: Large PAL nut used to secure most types of flipper buttons. Used on most makes/models. Used part in good condition.
	Pushbutton assembly, illuminated: $5.00 ea Units Available: 1 Manufacturer: MANY Factory Part #: Unknown Our Part #: U88 Condition: Used, Good Description: Pushbutton and housing assembly- as used on many later makes/models. Includes mounting nut. Button can be illuminated (combo lamp socket/switch holder not included). Has red lens on front with no printing on button face.

- Bally:

	Flipper button, red: $3.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: Unknown Our Part #: U50 Condition: Used, Fair to Good Description: Red flipper button, as used on many Bally pinball games from mid 1970's through mid 1980's. Will work on some Stern pinballs as well. Used part, sold as pictured.
	Flipper button housing, red: $3.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: Unknown Our Part #: U51 Condition: Used, Good Description: Red flipper button housing, as used on many Bally pinball games from mid 1970's through mid 1980's. Will work on some Stern pinballs as well. Used part, sold as pictured.
	Flipper button & housing, white: $3.00 ea Units Available: 1 Manufacturer: Bally/Stern Factory Part #: C-900, C-901 Our Part #: U380 Condition: Used, Good Description: White flipper button & housing, as used on many Bally & Stern pinball games from mid 1970's through mid 1980's. Used part, sold as pictured.
	Flipper button mounting bracket: $1.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: Unknown Our Part #: U54 Condition: Used, Fair Description: Metal bracket that mounts to back (inside) of flipper button housing and screws to cabinet wall to hold flipper button and housing in place. As used on many Bally pinball games, mid 1970's through mid 1980's. May also fit some Stern pinball games as well. Used part, sold as pictured.
Click to Enlarge	"Launch Ball" Button Assembly: $6.00 ea Units Available: 1 Manufacturer: Bally, Williams Factory Part #: 20-9663-B-4 Our Part #: U284 Condition: Used, Good Description: Original "Launch Ball" button assembly, as used on many late-model Bally and Williams games, including Attack From Mars, Medieval Madness and more. Used part in good condition- shows some signs of past normal use/handling but complete, working, and in good overall condition. Used part, sold as pictured.

- Stern:

Flipper button & housing, white: $3.00 ea Units Available: 1 Manufacturer: Bally/Stern Factory Part #: C-900, C-901 Our Part #: U380 Condition: Used, Good Description: White flipper button & housing, as used on many Bally & Stern pinball games from mid 1970's through mid 1980's. Used part, sold as pictured.

- Williams:

	Taxi start button assembly: $12.50 ea Units Available: 1 Manufacturer: Williams Factory Part #: Unknown Our Part #: U366 Condition: Used, Good Description: Hard-to-find green start button assembly used on Williams Taxi pinball. Used item in good condition- sold as pictured.
	Credit / flipper button assembly: $6.00 ea - SOLD - Units Available: 0 Manufacturer: Williams Factory Part #: Unknown Our Part #: U52 Condition: Used, Good Description: Button assembly used for credit (start) button on many models of Williams pinball games. Also used for flipper buttons on some older models up through mid 1970's. Used item, sold as pictured.
Click to Enlarge	"Launch Ball" Button Assembly: $6.00 ea Units Available: 1 Manufacturer: Bally, Williams Factory Part #: 20-9663-B-4 Our Part #: U284 Condition: Used, Good Description: Original "Launch Ball" button assembly, as used on many late-model Bally and Williams games, including Attack From Mars, Medieval Madness and more. Used part in good condition- shows some signs of past normal use/handling but complete, working, and in good overall condition. Used part, sold as pictured.

- Williams:

Buzzer assembly: $5.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Williams Factory Part #: Unknown Our Part #: U144 Condition: Used, Good Description: Buzzer assembly and wiring buss strip. As used in Williams Jungle Lord. Mounts in main cabinet. Used part in good condition.

Color may vary

Coin Box, Molded Plastic: $7.00 - SOLD OUT - Units Available: 0 Manufacturer: Many - Fits most makes/models Factory Part #: 545-5090-00 (Data East, Sega, Stern), others Our Part #: U_COINBOX Condition: Used Description: Molded plastic coin box, or coin "tray". Fits in most all makes and models of pinball games, old and new (e-mail us if you need to confirm fit for a particular game.) Used condition. Most are black, but colors may vary depending on availability. Some may have small scratches, chips, cracks, but are in usable condition. Sold as-is. Most used boxes we sell are from later-model Bally, Williams, Data East, and Sega pinball games (late 1980's and up), and measure approximately 10-5/8 inches wide, 10-1/8 inches deep (front-to-back), 3-5/8 inches tall. Also available new! New boxes available on our General Parts & Supplies page.

Coin Box Lid, Metal: $11.00 Units Available: 1 Manufacturer: Many - Fits most makes/models Factory Part #: 535-5013-03 (Data East, Sega, Stern), others Our Part #: U_COINLID Condition: Used Description: Metal coin box lid. Fits above coin boxes, as used in most all makes and models of pinball games, old and new. Used condition, style may vary. Sold as-is. Used lids we carry fit coin boxes described above (part # U_COINBOX). Also available new! New lids available on our General Parts & Supplies page.

- Most/All Makes & Models:

	Bill Acceptor Unit: $150.00 Compare to brand new at $429.00!!! - SOLD - Units Available: 0 Manufacturer: Mars - Fits most makes/models Factory Part #: VFM4-R1 Our Part #: DBV1 Condition: Used Description: Used and working bill acceptor / bill validator. Accepts both $1 and $5 bills*. Mars (MEI) model VFM4-R1. Smaller compact design- great for any pinball, video, redemption, or other arcade game, and many countertop games as well. 117vac model. Includes jumper plug and standard harness/connector that will plug in to any game fitted from the factory with a standard 9-pin square bill validator connector. Can be configured for various number of credits per bill. Have fun with your games at home or increase earnings on location by making it easier to accept your customers' money! Sold in tested/working condition. No warranty- sale is final- no returns, exchanges, or refunds. * NOTE: This validator accepts $1 bills and older (pre-2008) $5 bills. It will not accept the newer $5 bills. Validator contains a software EPROM chip which can possibly be updated to accept newer/different bills. Contact us for more information.
	Bill Acceptor Unit: $150.00 Compare to brand new at $429.00!!! Units Available: 1 Manufacturer: Mars - Fits most makes/models Factory Part #: VFM2-L1 Our Part #: DBV2 Condition: Used Description: Used and working bill acceptor / bill validator. Accepts both $1 and $5 bills*. Mars (MEI) model VFM2-L1. Smaller compact design- great for any pinball, video, redemption, or other arcade game, and many countertop games as well. 117vac model. Includes jumper plug and standard harness/connector that will plug in to any game fitted from the factory with a standard 9-pin square bill validator connector. Can be configured for various number of credits per bill. Have fun with your games at home or increase earnings on location by making it easier to accept your customers' money! Sold in tested/working condition. No warranty- sale is final- no returns, exchanges, or refunds. * NOTE: This validator accepts $1 bills and older (pre-2008) $5 bills. It will not accept the newer $5 bills. Validator contains a software EPROM chip which can possibly be updated to accept newer/different bills. Contact us for more information.
	1 DM German (Deutschmark) Coin Mechanisms: $3.00 ea Units Available: 1 Manufacturer: ALL Factory Part #: Unknown Our Part #: BB_MECH1DM Condition: Used Description: Used coin acceptor- takes 1DM (Deutschmark) German coins. Good condition, complete, working.
	2 DM German (Deutschmark) Coin Mechanisms: $3.00 ea Units Available: 1 Manufacturer: ALL Factory Part #: Unknown Our Part #: BB_MECH2DM Condition: Used Description: Used coin acceptor- takes 2DM (Deutschmark) German coins. Good condition, complete, working.
	5 DM German (Deutschmark) Coin Mechanisms: $3.00 ea Units Available: 1 Manufacturer: ALL Factory Part #: Unknown Our Part #: BB_MECH5DM Condition: Used Description: Used coin acceptor- takes 5DM (Deutschmark) German coins. Good condition, complete, working.
	Microswitch with trip wire: $3.00 Units Available: 1 Manufacturer: MANY Factory Part #: Undetermined Our Part #: U285 Condition: Used Description: Large microswitch with trip wire. Used for coin switch mechanism on many makes/models including many Bally, Stern, and Game Plan machines. Others too. Used part in good condition. Sold as pictured.

- Bally:

	Pinball Game Coin Box: $10.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally, Williams Factory Part #: Unknown Our Part #: BB_COINBOX1 Condition: Used Description: Black molded plastic coin box assembly. Includes dividers inside to separate each of the 3 coin openings. Front portion includes hinged handle, and clips off to allow coins to be dumped out. Will fit and work in most all makes/models of pinball games that use a standard 1, 2, or 3-slot coin door. Measures 9-1/2 inches wide, 10-5/8 inches deep (front to back), and 3-1/2 inches tall. Used, excellent condition.
	Hinge, coin door mounting: $7.50 ea Units Available: 1 Manufacturer: Bally Factory Part #: A-254-112 Our Part #: A-254-112 Condition: Used Description: Main hinge that mounts left side of coin door to main cabinet. Used on games from approx. 1971-1985.
	Bracket, coin lockout coil mounting: $1.00 ea Units Available: 1 Manufacturer: Bally Factory Part #: Unknown Our Part #: U123 Condition: Used Description: Mounting bracket for coin door lockout coil. Mounts on left side of #3 coin mechanism mounting bracket on inside of coin door. Used on Bally games from late 1960's through approx. 1984. Used part in good condition.
	Coin entrance bezel: $5.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally, Midway Factory Part #: Unknown Our Part #: U296 Condition: Used Description: Metal coin entrance bezel (coin slot). As used on many Midway and Bally/Midway games, including pinballs, video games, and older electro-mechanical arcade games such as rifle/gun games. Used part in good condition. Includes mounting bolts and nuts.

- Game Plan:

Coin Door Assembly- Game Plan Pinballs: $50.00 ea PURCHASE & SHIPPING: Oversize/Heavy Item- e-mail us with your shipping address for a shipping quote. Units Available: 1 Manufacturer: Game Plan Factory Part #: Unknown Our Part #: DOOR_GP Condition: Used, Excellent Description: Used coin door assembly in excellent condition from a Game Plan brand pinball game. Includes wiring and harness/plugs. Missing lock, coin mechanisms, and one coin chute switch. Otherwise complete and functional. Great replacement for any beat-up or damaged coin door. Hard-to-find item! Front side view    Back side view

- Midway:

Coin entrance bezel: $5.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally, Midway Factory Part #: Unknown Our Part #: U296 Condition: Used Description: Metal coin entrance bezel (coin slot). As used on many Midway and Bally/Midway games, including pinballs, video games, and older electro-mechanical arcade games such as rifle/gun games. Used part in good condition. Includes mounting bolts and nuts.

- Williams:

Pinball Game Coin Box: $10.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally, Williams Factory Part #: Unknown Our Part #: BB_COINBOX1 Condition: Used Description: Black molded plastic coin box assembly. Includes dividers inside to separate each of the 3 coin openings. Front portion includes hinged handle, and clips off to allow coins to be dumped out. Will fit and work in most all makes/models of pinball games that use a standard 1, 2, or 3-slot coin door. Measures 9-1/2 inches wide, 10-5/8 inches deep (front to back), and 3-1/2 inches tall. Used, excellent condition.

Coin lockout coil actuator tab: $1.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Williams Factory Part #: Unknown Our Part #: U136 Condition: Used Description: Metal actuator tab for coin lockout mechanism. Used on Williams 2- and 3-slot coin doors from late 1960's through 1983. Used part in good condition.

	Counter / Meter, 12-volt, 6-digit NEW: $5.00 ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: Unknown Our Part #: U289 Condition: New unused Description: 6-digit electromagnetic counter/meter. Brand new item. Can be wired into most games to keep track of number of plays, replays, coins, etc. Operates on 12v DC. Brand new part- unused.
Sample	Total play meter: $15.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: Undetermined Our Part #: U346 Condition: Used Description: Total play meter as used in mid-1970's Bally electro-mechanical pinball games. Can be used in most makes/models of games. Number of plays displayed on meter may vary depending on actual unit. Used part in very good condition.

	Used Pinball Glass: $20.00 ea. Units Available: Many Manufacturer: ALL Factory Part #: Unknown Our Part #: USED_GLASS Condition: Used, Good Description: Used pinball playfield glass. Standard sizes available as well as some other non-standard sizes. Conditions vary. NO SHIPPING- available for in-shop pickup only. Call or e-mail for more info.
	Bally EM Pinball 'Canopy' Glass & Frame: $50.00 + shipping/handling - SOLD - Units Available: 0 Manufacturer: Bally Factory Part #: Unknown Our Part #: BLY_CANG Condition: Used, Good Description: As used on many Bally electro-mechanical (EM) pinball games from approx. 1968 through 1974. This is the "one-piece canopy" style glass that has the stainless steel frame around the glass, and lifts up/off the playfield area as a single unit. In good condition. Has some surface rust on the top metal piece but can be cleaned up. Available with or without glass- we can disassemble and ship only the frame parts and hardware, to save shipping costs (no difference in sale price, due to labor required). Call or e-mail with your shipping address for a shipping quote.
	Pinball / Amusement Game Security Bar/Hasp: $15.00 ea Units Available: 2 Manufacturer: ALL Factory Part #: Unknown Our Part #: BB_SECBAR1 Condition: Used Description: Used coin door security bar and hasp assemblies. Complete with mounting bolts and nuts, and in good condition. A bit dusty/dirty from past use, but fully functional. Great investment for any game operated commercially (on-location) and adds a valuable level of security to your earnings! Can be used on most all pinball, arcade video, and other coin-op games that use standard width coin door. Compare to brand new units at $40 or more! Save save save!

	Grille, metal, main cabinet rear ventilation: $1.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Williams Factory Part #: 01-6592 Our Part #: 01-6592 Condition: Used Description: Small metal grille used to cover one of two ventilation holes in back corners of main cabinet bottom. Measures 2-1/2 inches square.
	Grille, metal, main cabinet neck ventilation: $12.50 ea Units Available: 1 Manufacturer: Williams Factory Part #: 01-6584 Our Part #: 01-6584 Condition: Used Description: Metal grille used in front of "neck" between main cabinet and backbox. Used for ventilation.

Handle, lockdown bar latch release: $5.00 ea Units Available: 2 Manufacturer: Bally Factory Part #: Unknown Our Part #: HAN_LBLATCH Condition: Used Description: Playfield glass lockdown bar release handle. As used on Bally games from approx. 1972 through 1985.

	Bally/Williams Cabinet Leg Bolt Plates, Large: $4.00 each Units Available: 8 Manufacturer: Bally, Williams Factory Part #: 01-11400-1 Our Part #: BB_LEGPLATELG Condition: Used Description: Original leg bolt mounting plate as used in most Bally/Williams pinball games from approx. 1992-1999. Used, good condition, no stripped threads. Heavy-duty version also available brand new- see our General Parts & Supplies page.
	Leg Bolt Plate, Wide: $1.00 each - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: Unknown Our Part #: U36 Condition: Used Description: Wide leg bolt mounting plate. As used on many makes/models. Measures 15/16 inch wide by 3-1/4 inch tall. No stripped threads in bolt holes. May have some light surface rust from storage. Condition/appearance may vary.
	Leg Bolt Plate, Narrow: $1.00 each Units Available: 3 Manufacturer: MANY Factory Part #: Unknown Our Part #: U37 Condition: Used Description: Narrow leg bolt mounting plate. As used on many make/models. Measures 3/4 inch wide by 3-1/4 inch tall. No stripped threads in bolt holes. May have some light surface rust from storage. Condition/appearance may vary. Heavy-duty version also available brand new- see our General Parts & Supplies page.
	Used Pinball Leg Bolts: 50¢ ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: Undetermined Our Part #: BB_LEGBOLT Condition: Used Description: Miscellaneous used leg bolts. Great for spot repairs, for a fixxer-upper you are getting rid of, or just to have some spares on hand! All used leg bolts have 5/8" acorn head, with good, useable threads- no stripped bolts. Most are steel but some black and brass may occasionally be mixed in. No mixing-matching or requests for specific length or type.

Plate, switch, power on/off switch: $3.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Williams Factory Part #: 01-5185 Our Part #: 01-5185 Condition: Used Description: Mounting plate for main power on/off switch in main cabinet. Can be used on most makes/models.

- Bally:

	Replay knocker assembly: $7.50 - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: Unknown Our Part #: U49 Condition: Used Description: Replay knocker assembly, as used in many Bally electro-mechanical pinball games from mid 1960's through early 1970's. Includes coil, wiring, and plug-in connector, complete. Used part, sold as pictured.
	Replay knocker assembly: $25.00 - SOLD OUT - Units Available: 0 Manufacturer: Bally Factory Part #: AS-2402-12 Our Part #: U148 Condition: Used Description: Replay knocker assembly with coil and plunger. As used in Bally solid-state pinball games. Can be used in other makes/models as well. Includes 26-1200 coil with diode. Used part in good condition. (Coil wrapper color may vary.)

- Data East:

Replay knocker assembly: $10.00 - SOLD OUT - Units Available: 0 Manufacturer: Bally, Data East, Williams Factory Part #: B-7409-2 (Williams), others Our Part #: U290 Condition: Used Description: Replay knocker mechanism which mounts in main cabinet on Data East games. Includes coil plunger and other hardware as pictured. Used part in good condition.

- Stern:

Replay knocker assembly: $10.00 - SOLD - Units Available: 0 Manufacturer: Stern Factory Part #: Unknown Our Part #: U147 Condition: Used Description: Replay knocker assembly with coil and plunger. As used in Stern solid-state pinball games. Includes N-26-1200 coil and wire harness connector. Plunger has some light surface rust, but unit is complete and functional and can be used in any Stern solid-state pinball that uses a replay knocker, or other makes/models as well. Used part in good condition.

- Williams:

	Replay knocker assembly: $7.50 - SOLD - Units Available: 0 Manufacturer: Williams Factory Part #: Unknown Our Part #: U21 Condition: Used Description: Replay knocker assembly, as used in Williams electro-mechanical pinball games. Complete unit, including A-2-23-750 coil. Used unit, sold as pictured.
	Replay knocker coil mounting bracket: $3.00 ea - SOLD OUT - Units Available: 0 Manufacturer: Williams Factory Part #: Unknown Our Part #: U29 Condition: Used Description: Coil mounting bracket for replay knocker coil. As used on most solid-state Williams pinball games, approx. 1977-up. Used unit.

Stepper unit coil plunger- side-notched: $2.00 ea Units Available: 1 Manufacturer: Unknown Factory Part #: Unknown Our Part #: U235 Condition: Used Description: Short coil plunger with side-notch. As used for stepper units in electro-mechanical pinball games. Measures 1-5/8 inches in length, 7/16 inch diameter. Notch is 1/4 inch in length. Used part in good condition.

- All/Most Makes & Models:

Microswitch with trip wire: $3.00 Units Available: 1 Manufacturer: MANY Factory Part #: Undetermined Our Part #: U285 Condition: Used Description: Large microswitch with trip wire. Used for coin switch mechanism on many makes/models including many Bally, Stern, and Game Plan machines. Others too. Used part in good condition. Sold as pictured.

- Data East:

Flipper button microswitch assembly: $7.50 Units Available: 1 Manufacturer: Data East Factory Part #: Unknown Our Part #: U32 Condition: Used Description: Complete flipper switch assembly with microswitch, actuator blade, and mounting bracket, as used on some Data East pinball games including Back to the Future and others.

- All/Most Makes & Models:

	Cage, rolling tilt ball: $10.00 ea Units Available: 4 Manufacturer: ALL Factory Part #: A-3851-1 (Bally), P-7751 (Bally), C-10336 (Gottlieb), 1B-510 (Stern), B-6572 (Williams assembly), 01-3893 (Williams), and others Our Part #: CAG_RTILT1 Condition: Used Description: Rolling tilt ball roll cage as used in most makes/models.
Sample- exact shape/style may vary	Tilt pendulum mounting bracket: $1.00 ea Units Available: 4 Manufacturer: ALL Factory Part #: P-7783 (Bally), 01-3444 (Williams), others undetermined Our Part #: U154 Condition: Used Description: Mounting bracket that holds vertical pendulum rod for tilt plumb bob. As used in most makes/models. Used part in good condition.
	Tilt plumb bob and rod: $2.00 ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: Unknown Our Part #: U57 Condition: Used Description: Tilt plumb bob with thumb screw and rod. Used on most makes/models. Rod measures 3-3/4 inch overall length. Has some wear/tear, but still usable. Used part sold as pictured.
Sample	Tilt bob ring: $1.00 ea Units Available: 3 Manufacturer: MANY Factory Part #: P-7750 (Bally), 01-3445 (Williams), others undetermined Our Part #: U62 Condition: Used Description: Metal ring that surrounds tilt plumb bob. As used in most makes and models. Used part in good condition.
	Ball, rolling tilt ball cage: $1.50 ea - SOLD OUT - Units Available: 0 Manufacturer: MANY Factory Part #: 20-6519 (Williams), others undetermined Our Part #: U63 Condition: Used Description: Small metal ball used in rolling tilt ball cage. As used on most makes/models. Used, sold as pictured.

- Bally:

Slam tilt switch assembly: $3.50 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally, Williams Factory Part #: Unknown Our Part #: U84 Condition: Used Description: Main cabinet slam tilt switch assembly, as used on Bally and Williams WPC pinball games, approx. 1990-1999. Mounts in front of main cabinet to the left of coin box, and plugs into coin door interface PC board. Complete assembly in excellent condition.

- Williams:

Slam tilt switch assembly: $3.50 ea - SOLD OUT - Units Available: 0 Manufacturer: Bally, Williams Factory Part #: Unknown Our Part #: U84 Condition: Used Description: Main cabinet slam tilt switch assembly, as used on Bally and Williams WPC pinball games, approx. 1990-1999. Mounts in front of main cabinet to the left of coin box, and plugs into coin door interface PC board. Complete assembly in excellent condition.

Williams 50v Flipper Power Transformer & Wiring Harness: $60.00 ea Units Available: 1 Manufacturer: Williams Factory Part #: Unknown Our Part #: TRANS50V Condition: Used Description: Transformer and wiring harness for 50-volt flipper power, as used in several mid-1980's Williams games including Space Shuttle and others.