![]() |
|
|
||||||
|
- Pinball Machines - Video & Other Games - Pinball Buyer's Guide - Game Sales Info - Game Parts & Supplies - Ordering Info - Contact Us - What's new this week? - General Parts & Supplies - Game-Specific Parts - Plastics & Decals - Electronic Parts - Coils (Solenoids) & Coil Parts - Paperwork Items - Bargain Basement > Video & Other Parts/Supplies - ROM Chips - Technical Articles - Game Service & Repair - Ordering Info - Contact Us - Site Map |
Information on this page is subject to change without notice, and may not necessarily be current. All prices are in US Funds.
|
![]() Click to enlarge |
Cocktail Table Video Top Glass:
|
|||||||||||||||||||||||||||||
![]() Click to enlarge |
Button Assembly with Switch: $7.50 ea.
Part # VIDB_WHT Complete button assembly with microswitch. Can be used on most makes/models of games. Includes retainer nut for mounting. |
|||||||||||||||||||||||||||||
![]() |
Microswitch - Large, no Actuator: $3.49 ea
Part # 5647-12133-00 Large white microswitch without actuator. Commonly used for start buttons on pinball games and most buttons on later-model video games. Mounts in button housing (not included). |
|||||||||||||||||||||||||||||
Click to enlarge |
Donkey Kong Control Panel Plexi - Used Original: $17.50
One unit available.
Part # CP_DK Original used control panel screened plexiglass from upright Donkey Kong video game. Overall fair to good shape- shows some use. Sold as-is. Additional pictures: Pic 1 Pic 2 |
|||||||||||||||||||||||||||||
Click to enlarge |
Pole Position II Marquee Decal - New Original: $19.95 - SOLD OUT -
Part # MAR_PP2 Original new adhesive decal for top marquee on Pole Position II upright video. New condition. Adhesive backed- just peel and stick! |
|||||||||||||||||||||||||||||
Click to enlarge |
Defender Control Panel/Overlay - Brand New: Part # CP_DEF Brand new control panel overlay for Defender video. Adhesive backed. Silkscreened thick plastic- 1/16" thick. Light areas and "crack" looking marks in large image (left) are part of the removable plastic film on the top of the plastic control panel overlay which prevent scratches/scuffs. This film is to be peeled off before installing. |
|||||||||||||||||||||||||||||
![]() Click to enlarge |
Mr. Do! 1 & 2 Player Start Decals: $2.00 / set
1 set left!
Part # MS_MRDO Original 1 and 2 player start decals for Universal Mr. Do! arcade video game. Each decal measures approx. 1-3/8 inch diameter. |
|||||||||||||||||||||||||||||
![]() Sample |
Defender ROM PC Board - Used: $10.00 ea.
Part # ROMBD_DEF Units Available: 4 Used ROM board from Williams Defender video game. Untested, no ROM chips are included. Sold as-is. |
|||||||||||||||||||||||||||||
![]() Sample |
Joust ROM PC Board - Used: $10.00 ea.
Part # ROMBD_JOU Units Available: 3 Used ROM board from Williams Joust video game. Untested, no ROM chips are included. Sold as-is. |
|||||||||||||||||||||||||||||
![]() |
Robotron ROM PC Board - Used: $10.00 ea.
Part # ROMBD_ROB Units Available: 1 Used ROM board from Williams Robotron video game. Untested, no ROM chips are included. Sold as-is. |
|||||||||||||||||||||||||||||
![]() |
Pac-Man & Ms. Pac-Man MPU Board Capacitor Kit: $10.95 ea.
Part # KITPACMPU This kit includes four capacitors to replace originals on the original motherboard used in Pac-Man and Ms. Pac-Man video games and help remove audio hum- a common problem in old original games. Includes instructions. Requires moderate electronics skills and tools, as well as proper removal and installation of capacitors. Soldering and desoldering of each capacitor is required. |
|||||||||||||||||||||||||||||
![]() |
13 Inch Color RGB Monitor: $186.83 - SOLD OUT - - Discontinued item- no longer being made... - Part # MON13RGB There's nothing like the crisp colorful look and reliability of a brand new monitor in your classic video! This brand new replacement 13-inch color monitor will fit for most classic arcade video games that originally used a 13-inch monitor. Great for cocktail video games and countertop videos including many Merit Megatouch models and more! Get rid of that old problematic and embarassing washed-out, wavy, blotchy picture, and restore the original look and colors to your classic game! Features:
|
|||||||||||||||||||||||||||||
![]() |
19 Inch Color RGB Monitor: $249.95 ea
- SOLD OUT - - Discontinued item- no longer being made... -
Part # MON19RGB There's nothing like the crisp colorful look and reliability of a brand new monitor in your classic video! This brand new replacement 19-inch color monitor will fit for most classic arcade video games that originally used a 19-inch monitor. Can also be used to replace 20-inch color monitors in some Japanese-made video games (some slight modificiation to mounting frame of monitor/game may be required for some games). Get rid of that old problematic and embarassing washed-out, wavy, blotchy picture, and restore the original look and colors to your classic game! Features:
NOTE/DISCLAIMER: Monitor installation should always be performed by a qualified technician using extreme caution. Monitors utilize lethally high voltages (even when power is turned off) which can kill. Some monitors may require degaussing after installation for proper color adjustment. Need a technician? See our Game Service & Repair page for tips on finding a technician in your area. |
|||||||||||||||||||||||||||||
![]() |
Monitor Cable Harness Kit: $9.95 ea
Part # MONKIT For standard RGB color monitors in a variety of sizes. Repair or replace power and signal cables on your game's monitor. This kit includes a 110vac power line cord (non-grounded) with wall plug receptacle on one end and standard 2-prong Molex connector on the other, which connects to monitor. Also includes signal cable that comes from game circuit board and connects to monitor chassis for red, green, blue, and v/h sync. lines in standard monitor chassis Molex connector. Great for replacing hacked/worn cabling, or often a necessity when installing a new monitor. Keep one on hand for emergency repairs or installations! |
|||||||||||||||||||||||||||||
![]() |
Jamma Cable Harness & Connector: $24.75 ea
Special order item- please allow 2-3 weeks for delivery...
Part # 80-5100-00 New universal replacement Jamma connector and wiring harness. Can be used on any 1 or 2-player video game that supports the Jamma interface/wiring, and makes an excellent new replacement for older pre-Jamma connectors/harnesses in games with MPU card-edge connector in such games as Pac-Man, Ms. Pac-Man, Mr. Do! and more! (See note below.) 56 pin connector with 46 wires/pins installed. 5-foot wire length. Includes keyed block (removable). Wires are grouped and labeled according to devices/controls for easy identification and neat organization, such as Coin Door, Player 1, Player 2, Speaker, Power, Video and other controls. NOTE: When using on a pre-Jamma or non-Jamma game, some relocating or removal of pins/wires may be required, depending on exact game pinout. Connector housing may need to be cut short to fit some card-edge connectors on some MPU boards. We recommend using an 0.156" pin extractor tool for easy pin removal and replacement, available separately on our Electronic Parts page. |
|||||||||||||||||||||||||||||
![]() |
FS-2 Fluorescent Starter: $2.49 ea
Part # FS2000 New starter for flourescent lighting as used in most video games, newer pinball games, and some pinballs from the 1980's. If your flourescent tube won't light, or just sits and flickers, you may very well need a new starter! Grab a couple for spares! This standard FS-2 starter plugs right in and will start 14, 15, and 20 watt lamps in 15", 18" and 24" lengths. |
|||||||||||||||||||||||||||||
![]() ![]() ![]() |
New Leg Levelers with Nut: Several types available for various applications. For a full listing with pictures and prices, please see our General Parts & Supplies page |
|||||||||||||||||||||||||||||
![]() |
T-Nuts for Game Bottom Levelers (Feet): 74¢ ea. Use with above levelers! Part # HWR10 Replace those broken, rusty, siezed, or stripped t-nuts! These 3/8" x 16 t-nuts are a must for any game overhaul! Here's what you need if you've ever cross-threaded a leveler or had one snap off when trying to remove! Keep a few on hand for valuable spares! |
|||||||||||||||||||||||||||||
![]() |
|
![]() ![]() |
Game Lock w/keys A variety of locks available- will fit most all games! See our General Parts & Supplies page for listing with pictures and prices. Keep that game locked and unwanted hands and fingers out! Most game repairs we do are caused by problems located within elbow's reach of the front door- wires pulled out, coin switches messed up, short-circuits, switches pulled apart, etc. Avoid damage or injury by keeping your game locked and safe! |
||
![]() |
Standard 2-Slot Coin Door: $81.15 ea - Temporarily out- please check back... -
Brand new commercial pinball/arcade coin door. Industry modern standard style which will fit most makes and models with standard 4-bolt mounting pattern, including most later-model Bally (1985-up), Williams (~1983-up, but not all models), Data East (1987-up), Gottlieb (~1990-up), Sega (1993-up), and Stern (1998-up) pinball games, and most arcade video games going back to about 1980 as well. Some games may require slight modifications/alterations for proper fit. May also fit on some older model games and other makes/models with some or no modifications. Please measure your game before ordering. Click here for measurements and mounting diagram. Door outer dimensions are 13.5 inches wide by 11.69 inches tall. Mounting requires an opening of 12.25 inches wide by 10.41 inches tall. Click here for diagram. Features:
|
||
![]() |
Small 1-Slot Coin Door: Part # COINDOOR2 Brand new commercial arcade game coin door. This unit is a small, single-coin-slot door, with removable panel for accomodating a bill acceptor and/or upstacker. Great for upgrading a coin-only game to accept bills! Measures approx. 9-1/2 inches tall by 6-3/4 inches wide. Door only- frame not included. Replace the exsiting door on your game with this one, utilizing the original frame. Includes lock, keys, coin slot button and rejector mechanism, coin return assembly, door hinge, coin switch, and coin mech. mounting hardware (wiring and coin mech. not included). NOTE: Door does not include any wiring. Operation requires properly connecting-up your game's old wiring harness and accessories, or custom-wiring controls into your game, depending on exact application. You are responsible for proper electrical connections based on your exact application. |
||
![]() Color/style may vary |
25¢ Coin Mechanism: $14.95 ea
Part # COINMECH25 High quality 25¢ coin mech. designed for use with U.S. quarters (25¢). Also known as "coin acceptor" or "coin rejector". Can be used in virtually any coin-operated game that uses U.S. quarters with this type of standard mechanism. Includes molded-in studs on all four corners for mounting in most any game. Games using only two (2) front studs (such as late-model Bally/Williams pinball games) can easily use this mech by grinding/filing off the back studs, which are not used in these types of games. Fully adjustable with all of the quality devices and coin verification features found in any high-quality mech. Measures approx. 3-1/2 inches wide by 4 inches tall. May not fit on some European or Japanese coin doors that use different size/style mechs. |
||
![]() |
Midway NHL Hockey Security PIC Chip: $49.95
Only one left!
Part # PICCHIPVID2 Here's a hard to find item! This is an original security PIC chip used for the Midway arcade video game NHL Hockey. This chip ("U64" on the motherboard) is used to authenticate the circuit board and software in the game, and the game will not function without this "pass key" which lets it boot up and run. Very hard to find anymore and if your existing PIC chip goes bad, it can render your whole game unusable. Originally sold through Midway distributors for around $150 each, this original chip is available at less than half original price. Valuable spare part- grab one to keep for a backup! Sales on chips and other electronic parts are final- no returns, exchanges, or refunds. |
||
![]() |
Midway NBA Hangtime Security PIC Chip: $49.95
Only one left!
Part # PICCHIPVID3 Same as above, but for the Midway arcade video game NBA Hangtime. Sales on chips and other electronic parts are final- no returns, exchanges, or refunds. |
||
![]() |
Midway Mortal Kombat MK3 Ultimate Security PIC Chip: $49.95 - SOLD OUT -
Part # PICCHIPVID4 Same as above, but for the Midway arcade video game Mortal Kombat 3 Ultimate. Sales on chips and other electronic parts are final- no returns, exchanges, or refunds. |
||
![]() |
Telescoping Mirror Tool: $4.95 ea
Part # TOOL_MIR See what you've been missing! Handy mirror tool allows you to see behind and under all those hard to reach areas. 1-1/4 inch mirror head rotates 360 degrees and bends to any angle. Shaft extends out to any length from 4-1/2 inches to just over 2 feet! Includes clip for pocket or belt. Very handy for any kind of pinball or video game work! A must for any pinball tool box! |
||
![]() |
Telescoping Magnetic Pick-Up Tool: $4.95 ea
Part # TOOL_MAG Never lose a screw again! One use of this tool and you'll wonder how you ever did without one! Telescoping handle extends out to any length from 4-1/2 inches to just over 2 feet! Super strong magnet holds multiple screws, nuts, and other metal parts. Ideal for holding screws and nuts during removal to keep them from falling into wiring harnesses or onto relays/motors in mechanical games and shorting out. Great for those hard-to-reach areas, too- retrieve lost parts from the back corners of your cabinet or from under the motor/mech board in older mechanical games! Includes clip for pocket or belt. Very handy for any kind of pinball or video game work! A must for any pinball tool box! |
||
![]() |
Switching Power Supply, 15 Amp, 110 Watts: $37.95 ea
Part # PWRSUP15 Ideal, compact, modern replacement power supply for many commercial arcade/video and other coin-op games and computer/solid-state devices. Also great for use on your test/hobby workbench- use to power various devices and PC boards from pinball and video games for testing and repair work. Features:
|
Game Manuals & Schematics: For various games:
Original Game Sales Flyers: For various games- video and other gameroom pieces: