 | Pinball Parts: What's New This Week?
New items- on sale, just in, back in stock, and currently-featured items.
NOTE: See all the parts below, along with thousands more,
on our General Parts & Supplies page, and our Game-Specific Parts pages.
|
 |
 Used Parts: New section just added!
Check out the latest new section we've added just for used parts- great deals on great used items including many out-of-production, obsolete, and hard-to-find parts! Many more items being added soon, so if you don't see what you need, check back, or e-mail us!
Click here for full listing!
|
 |
Connectors, Connectors, Connectors!
New line of IDC connector housings just added along with a new IDC wire insertion tool! These connector housings are used in most electronic pinball games from approx. 1980 to date and feature built-in pins. No crimping or soldering needed- just press the wire in with our handy wire insertion tool, and you've got a neat, factory-looking connector repair!
We also carry crimp-pin Molex style connector housings in several sizes and styles, along with pins extractor tools, for those older vintage games.
See our Electronic Parts page for a full listing of connector headers, housings, pins, and insertion/extractor tools!
|
 |
Backbox Hinge Carriage Bolt: $1.65 ea
Part # 4322-01139-12B
Short black carriage bolt used to secure backbox hinge from outside on main cabinet side on Bally and Williams games from approx. 1988-1999. Original factory part- correct fit. Used with sleeve nut # 02-4352 (below).
|
 |
Backbox Hinge Sleeve Nut: $2.99 ea
Part # 02-4352
Black sleeve nut with hex wrench opening used to secure backbox hinge on main cabinet side from interior cabinet side on Bally and Williams games from approx. 1988-1999. Original factory part- correct fit. Used with carriage bolt # 4322-01139-12B (above).
|
 |
Heat Shrink Tubing Kit - 127 Pieces: $11.95 ea
Part # HS_KIT
BIG 127 Piece Set! This handy shrink tubing kit includes seven different sizes of tubing from 5/64 inch to 1/2 inch, in handy pre-cut sizes. Easy to use for proper, good-looking wiring repairs. Slip a piece of tubing over one wire, make your connection, slide the tubing in place, and use heat from a match, lighter, or heat gun, to shrink the tubing over the repaired connection. Makes neat-looking repairs and properly insulates wiring for protection. Great for all kinds of pinball repairs! Includes compact storage case that measures 7 inches by 3-1/2 inches and fits neatly into any toolbox. |
 |
4-Outlet Surge-Protected Power Strip: $9.95 ea
Part # PSTRIPX4
Protect your game's valuable electronics! This handy and compact 4-outlet power strip features surge protection that will protect your valuable electronic pinball or video game against deadly power surges and spikes. Also features an illuminated circuit-breaker on/off switch, and full ground protection as well. Protect your game against hundreds of dollars in potential repairs with the cheap insurance of a surge-protected power strip for less than $10!
|
 |
Bullseye Target Decal, Round Red: $1.00 ea.
Part # PDG332
Round adhesive decal for standup targets, featuring red and white "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Williams solid-state pinball games, including Firepower, Space Shuttle, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
 |
Bullseye Target Decal, Round Blue: $1.00 ea.
Part # PDG333
Round adhesive decal for standup targets, featuring blue and white "bullseye" design. Fits on most all round standup targets. Install over the worn-away paint on your original targets for a fresh, new appearance! Ideal replacement for targets on older Williams solid-state pinball games, including Flash, Stellar Wars, and more. Or use on any game for a nice new look. Decals feature protective Mylar covering on the front to help protect against wear and ensure long life.
Decals measure 1 inch in diameter, and have center punched out to fit over rivet in center of original target. Sold individually.
|
 Click to enlarge |
Game Plan Pinball Coin Door Assembly- Used: $53.00
1 unit available
Part # DOOR_GP
Used coin door assembly in excellent condition from a Game Plan brand pinball game. Includes wiring and harness/plugs. Missing lock, coin mechanisms, and one coin chute switch. Otherwise complete and functional. Great replacement for any beat-up or damaged coin door. Hard-to-find item!
|
 |
Bally Squawk & Talk Capacitor Kit: $29.95 ea
- Back in stock! -
Part # KITBLYST
BIG 16 piece replacement capacitor kit for Bally Squawk & Talk sound/speech boards, as used in many Bally/Midway games from 1980 through approx. 1986, including popular games such as Centaur, Centaur II, Eight Ball Champ, Eight Ball Deluxe, Elektra, Embryon, Fathom, Fireball II, Flash Gordon, Medusa, Mr. & Mrs. Pac-Man, Spectrum, Vector and more. A must for rejuvenating any original S&T board. Installing this kit typically clears up common problems such as noise, static, squelch, hum, distortion, truncated/missing speech, missing audio, and even "dead" boards- all common symptoms of old-age parts in these games. It's the first thing we install on these games that come into our shop. And a MUST for reliability. Best to replace before problems start! Requires minimal electronics skills and tools- soldering and desoldering of each capacitor.
|
Click to enlarge |
Williams Disco Fever Playfield Plastics (Used): $25.00/set - SOLD -
Part # PLAS_DF
Used playfield plastics from Williams Disco Fever. Sold as pictured at left. Some pieces have some minor warping from heat/usage over the years, and need cleaning. A few duplicate pieces are included in the set. Sold as-is.
Duplicate pieces available for sale individually- inquire if interested.
|
Click to enlarge |
Monster Bash Main Cabinet Front Art Decal (NOS): $125.00 - SOLD -
Main cabinet front art decal for Williams Monster Bash. This is a factory NOS decal- not a reproduction.
Closeout item- sale is final. Not eligible for return, refund, exchange.
|
Click to enlarge |
Monster Bash Backbox Side Art Decal Set (NOS, blem): $75.00
1 Set Available
Backbox side art decal set for Williams Monster Bash. Set includes decals for both left and right sides of backbox. This is a NOS factory original set, however one side (top piece in photo at left) was printed slightly offset so appears a bit blurry in the artwork toward the upper half of the decal.
Closeout item- sale is final. Not eligible for return, refund, exchange.
|
 |
Relay Switch, Make/Break Contacts: $3.50 ea
Part # SW_MB
Electro-mechanical pinball relay style switch stack with make/break switch contacts (one common leaf, one normally open, and one normally closed). Measures 2-1/8" overall length, 11/32" tall, 5/16" wide, with 1/4" between screw mounting holes (center to center).
|
 |
Pinball Backglasses: Price and selection varies
Several backglasses currently available, including Baby Pac-Man, Circus (Gottlieb), Cleopatra, Disco Fever, Ice Fever, Wild Life.
See our Game-Specific Parts page for a full listing of items by game name.
|
 |
Video Monitor and Marquee Glasses: Price and selection varies
Several new and used glasses currently available, including Astron Belt, Centipede, Gorf, Joust, Kangaroo, Pac-Man, Space Invaders.
See our Game-Specific Parts page for a full listing of items by game name.
|
 |
Bally/Williams WPC-95 A/V Board Replacement Filter Capacitor: $4.99 ea
Part # CAP10kUF35VRAD
Replacement power supply filter capacitor as used on Bally/Williams WPC-95 A/V (audio/visual) boards (two capacitors used per board). Clean up power on your board and cure display and sound problems with new filter caps. Rated at 35vdc DC 10,000uF. Requires soldering skills and necessary tools for removal/installation.
|
 |
Rubber Ring Kits: Under $10 and up!
MORE KITS JUST ADDED! We now have in stock full rubber ring kits for hundreds of different games! Kits include all rubber rings for playfield, including regular round rings, flipper rubber rings, top arch rebound ring, and plunger tip. Kits also include playfield diagram showing locations, quantities, and sizes of all of the rings. ELIMINATE THE GUESSWORK! Buy just what you need and get it right the first time with an Action Pinball rubber ring kit.
- Click here for a full listing with prices, and online ordering.
- Don't see your game listed? E-mail us and we can probably put a kit together for you!
|
What's New This Week
