(Click to Enlarge)
| Image: (Click to Enlarge) | Description: |
|---|---|
|
| Overall view. |
|
| Full playfield view. |
|
| Lower playfield view. Game has brand new score card holder (apron), shooter gauge, and score/instruction cards. |
|
| All new drop targets, playfield plastics, pop bumper caps, spinner decals. |
|
| New flipper bats, rubber rings, LED upgrade. Custom clear Mylar added to top of shooter lane for protection. |
|
| New playfield has been clearcoated. Protective washers added under new slingshot plastics. |
|
| Right middle playfield. New spinner decals, drop targets, pop bumper Mylar rings. |
|
| Left middle playfield. New mini posts in front of spinners. New nylon cap nuts and screws on plastics. |
|
| Center playfield- eject saucer. All mechanical devices on this game have been reconditioned and rebuilt. |
|
| Upper playfield. Clear custom Mylar pieces have been added in the upper shooter lane to help protect the playfield finish. |
|
| Upper playfield- drop targets. |
|
| We've made and installed 2 custom aluminum protector brackets at either side of the top edge of the playfield. These protect the wood and plastics at these points against damage from the factory metal brackets in the main cabinet that rub on the back edge of the playfield when it is raised and lowered. No need to worry about any wear/tear or damage here. |
|
| Lower playfield- underside. All mechanisms fully reconditioned/rebuilt with new parts where needed. All switches that use them have new capacitors installed. |
|
| Middle playfield- underside. Wiring harness fully removed, cleaned by hand, and reinstalled. Pop bumpers rebuilt with many new parts. |
|
| Upper playfield- underside. |
|
| Cabinet left side. Full professional cabinet repaint. New stainless steel side rails and retaining twist nails. New flipper buttons. |
|
| Cabinet right side. Legs repainted in original factory color. New leg bolts, leg bolt plates, levelers, and protector pads. |
|
| Cabinet front. Coin door fully disassembled, cleaned, rebuilt. New lock and SBA dollar decal installed. |
|
| Rear of game. New nylon gliders installed on back of main cabinet and underside of backbox, to replace worn factory gliders. New original-style grounded power cord installed. |
|
| Underside- main cabinet. |
|
| Backbox left side. |
|
| Backbox right side. New backbox lock installed. |
|
| Backglass is factory-original and in excellent condition. |
|
| Back side of factory-original backglass. |
|
| Coin door interior. Every individual component of the coin door and it's frame were removed during the restoration and cleaned/reconditioned and rebuilt. Door has working coin switches for operation. Fully-working quarter and dollar coin acceptors are installed. |
|
| Main cabinet interior. Fully reconditioned, repainted, and all individual components cleaned and restored. Power supply rebuilt. New power cord installed. Coin box & lid are missing, as well as coin box lock bracket, and are not included with game. |
|
| Detail- power supply. Includes original clear plastic cover over fuses & components. |
|
| Detail- tilt mech panel. |
|
| Front cabinet interior. |
|
| Lockdown bar latch. Fully restored with new hardware. |
|
| Lockdown bar underside. Restored with new foam seal strip. |
|
| Backbox insert panel. New LED lighting installed. All score displays are factory-original and 100% working condition. Some have very slight burn-in from past use, which does not affect the appearance when they are running. |
|
| Insert panel- back side. All wiring harnesses throughout game have been removed, cleaned by hand, and re-installed. Strobe light assembly rebuilt with new capacitors. Original green factory assembly tags still present. |
|
| Backbox interior- circuit boards. Original boards fully cleaned and reconditioned/upgraded where necessary. 100% working. |
|
| We have painstakingly reproduced the settings/adjustments cards in the top of the backbox. These are all new cards with no stains, tears, or other wear/tear. Nice finishing touch. |
|
| MPU and lamp driver boards. MPU is original and in excellent condition with no battery damage, and has remote-mount battery pack installed. |
|
| New instruction card for backbox removal (underside of backbox). |
|
| Factory-original set of shipping blocks with instructions and screws still sealed in plastic bag are included with this game. These were to be temporarily installed on the underside of the backbox to keep it from shifting left/right during shipping (see next image for detail), but obviously were never installed. |
|
| Example of 1 of the 2 shipping blocks installed on the underside of the right side of backbox for shipping. 1 block would have been used on either side. New game manual with wiring/schematic diagrams included. |