| Item: |
Value: |
| Cabinet and backbox nylon gliders (8) | $7.98
|
| NOS Playfield | $700.00
|
| Leg bolts (8) | $13.20
|
| Leg bolt protective nylon washers (8) | $2.00
|
| Leg bolt plates- heavy duty (4) | $19.80
|
| Leg levelers- heavy duty (4) | $6.00
|
| Stainless steel cabinet side rails (2) | $129.99
|
| Side rail twist nails (14) | $2.80
|
| Leg pad protectors (4) | $11.95
|
| Flipper buttons (2) | $5.00
|
| Flipper switches (2) | $23.58
|
| Lockdown bar latch SEMS screws (4) | $0.76
|
| Ball shooter external spring | $0.90
|
| Ball shooter washers (3) | $1.41
|
| Playfield switch capacitors (8) | $3.92
|
| Cabinet wire harness rubber restraining ring | $0.92
|
| Fuse clips for power supply board (4) | $1.00
|
| Grounded power cord- original style | $20.25
|
| Full LED kit | $139.95
|
| LED Adapter Set | $63.00
|
| LED Adapter Power Connector | $0.85
|
| Coin door lock | $4.95
|
| Backbox lock | $6.95
|
| Backbox bolts (4) | $4.36
|
| Backbox bolt washers (4) | $1.20
|
| Regulator board filter capacitor kit | $10.95
|
| Lockdown bar foam seal | $3.00
|
| Strobe light power capacitors (2) | $5.00
|
| Playfield post t-nuts (14) | $3.50
|
| Star rollover button assembly (2) | $5.98
|
| Misc hardware (nuts/screws/washers) | $5.50
|
| Drop target set w/ decals | $55.00
|
| Switch diodes (2) | $0.50
|
| Playfield coil fuse holder | $1.99
|
| Small flipper cap | $10.00
|
| Large flipper bat/shaft (2) | $15.18
|
| Ramp screws (18) | $2.70
|
| Pop bumper bodies (3) | $9.00
|
| Pop bumper bases (3) | $3.00
|
| Pop bumper skirts (3) | $2.97
|
| Pop bumper skirt springs (3) | $1.84
|
| Rubber ring kit | $16.02
|
| Mini post- heavy-duty | $8.38
|
| Mini post nuts/washers (6) | $0.74
|
| Playfield posts- red (32) | $33.60
|
| Screened artwork plastics set | $173.50
|
| Playfield plastics screws (21) | $3.15
|
| Playfield plastics cap nuts (26) | $7.54
|
| Protective fender washers for plastics (4) | $1.00
|
| Shooter lane protector | $8.85
|
| Playfield glass, tempered | $80.00
|
| Playfield apron & shooter gauge | $132.35
|
| Pop bumper cap set (3pcs) | $23.99
|
| Pop bumper cap screws (6) | $0.90
|
| Alltek Ultimate MPU board | $200.00
|
| Flipper rebuilt kits (3) | $116.55
|
| Flipper coil (3) | $62.85
|
| New pin ball | $2.79
|
| Coin door decal | $2.79
|
| Spinner target decals (2 sets) | $8.00
|
| Dollar coin acceptor (NOS) | $25.00
|
| Cabinet/backbox instruction card set | $25.00
|
| Game manual with schematics | $23.88
|
| Score & instruction card set | $5.00
|
| |
|
| New Parts Total: | $2,277.27
|