Coin Reject Button (Williams)
Part # 2A-3350
Condition: New
Metal coin reject button for some older Williams games from the late 1960s through early 1980s.
|
|
Playfield Support Arm (Bally/Williams)
Part # 01-4028
Condition: New
Playfield support arm for many old and new Bally and Williams games. Measures 20-5/8 inches in length, 1 inch wide, 1/8 inch... more
|
|
Coin Entry Plate - Quarter (Williams)
Part # 01-4215
Condition: New
Metal coin entry plate for US or Canadian Quarters on Williams doors from approximately 1965-1982. This piece fits over... more
|
|
Coin Entry Plate - Nickel (Williams)
Part # 01-4215-N
Condition: New
Metal coin entry plate for US Nickels. Often found on Williams doors from approximately 1965-1982. This piece fits over the... more
|
|
Coin Entry Plate - Nickel (Williams) (USED)
Part # 01-4215-NU
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Coin Entry Plate - Dime (Williams)
Part # 01-4215-D
Condition: New
Metal coin entry plate for US Dimes on Williams doors from approximately 1965-1982. This piece fits over the plastic pricing... more
|
|
Coin Entry Plate - Dime (Williams) (USED)
Part # 01-4215-DU
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Coin Entry Plate - Dollar (Williams)
Part # 01-4215-SBA
Condition: New
Metal coin entry plate for US Dollar coins on Williams doors from approximately 1965-1982. This piece fits over the plastic... more
|
|
Trim - Upper - Coin Door Opening 1965-1982 (Williams)
Part # 01-4219
Condition: New
Metal trim piece that goes across top of coin door opening on multi-slot coin doors on most Williams pinball, video, and other... more
|
|
Bracket - Coin Door Lock (Williams)
Part # 01-6249
Condition: New
Metal security bracket for coin door lock. Serves as a reinforcement for lock tab. Usually missing on most games. ... more
|
|
Bracket - Playfield Support Arm (Bally/Williams)
Part # 01-12352
Condition: New
Metal 90-degree bracket that mounts on right inside wall of main cabinet and holds end of playfield support arm when in the... more
|
|
Cover - Coin Switch - Yellow Plastic - Early Version (Williams)
Part # 03-7233E
Condition: New
Molded yellow plastic cover for coin switch on Williams 2- and 3-slot coin doors. This early version was installed on... more
|
|
Cover - Coin Switch - Yellow Plastic - Late Version (Williams)
Part # 03-7233L
Condition: New
Molded yellow plastic cover for coin switch on Williams 2- and 3-slot coin doors. This late version was installed on... more
|
|
Coin Entry Chute - White Plastic (Williams)
Part # 03-7472
Condition: New
White plastic coin entry chute for late Williams electro-mechanical (EM) and early electronic solid-state (SS) games from... more
|
|
Coin Entry Plate - Blank w/ Williams Logo - NOS (Williams)
Part # 16-8636
Condition: New
Blank metal coin entry plate with red Williams W logo in center. Blocks any un-needed coin entry positions on Williams... more
|
|
Price Plate (Williams) 2 Nickels 1 Play - Blue/Black
Part # 16C-8640-4
Condition: New
Plastic price plate for coin slot entry on older Williams pinball and arcade games from mid 1960s through early 1980s. Measures... more
|
|
Price Plate (Williams) Dime 1 Play - Yellow/Black
Part # 16C-8640-5
Condition: New
Plastic price plate for coin slot entry on older Williams pinball and arcade games from mid 1960s through early 1980s. Measures... more
|
|
Price Plate (Williams) Dime 1 Play - Yellow/Black (USED)
Part # 16C-8640-5U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of... more
|
|
Price Plate (Williams) Quarter 3 Plays - Red/Black
Part # 16C-8640-6
Condition: New
Plastic price plate for coin slot entry on older Williams pinball and arcade games from mid 1960s through early 1980s. Measures... more
|
|
Price Plate (Williams) 2 Plays Quarter - Yellow/Black
Part # 16C-8640-100
Condition: New
Plastic price plate for coin slot entry on older Williams pinball and arcade games from mid 1960s through early 1980s. Measures... more
|
|
Bracket - Coin Mechanism Retainer (Williams)
Part # 1A-4253
Condition: Varies
Metal bracket that attaches to left edge of coin mechanism and holds it in place on Williams 2- and 3-slot coin doors on most... more
|
|
Coil Plunger - Knocker / Chime / Bell - 2-1/2-Inch (Williams)
Part # A-5387
Condition: New
Coil plunger for replay knocker and scoring chimes/bells in many Williams games, old and new. Measures 2-1/2-inches... more
|
|
Coin Reject Button (Williams)
Part # A-6847
Condition: New
Metal coin reject button used on some older Williams games from the late 1960s through early 1980s.
|
|
Lockdown Bar - Standard Width 22-5/16-in (Bally/Williams) (SEE NOTE)
Part # A-18240
Condition: New
Standard-width stainless steel lockdown bar for late-model Bally and Williams standard-width pinball games (see game listing... more
|
|
Score Reel Assembly 3-Inch Yellow (Bally) (USED)
Part # AS-1900-XXX-3U
Condition: Used
Used score reel assembly with 3-inch yellow plastic reel with black numbers (reel is broken & chipped). As used in most Bally... more
|
|
Coin Switch Assembly - Nickels (Bally/Williams)
Part # B-6582
Condition: New
Coin switch assembly used for US nickels. Used in older Williams games from mid-1960s through early 1980s.
|
|
Coin Switch Assembly - Dimes and Quarters (Williams)
Part # B-6853
Condition: New
Coin switch assembly used for US dimes and quarters. Used in older Williams games from mid-1960s through early 1980s.
|
|
Lift Trim - Stainless Steel - 28-1/2 Inch - for 3/16 inch Thick Backglass
Part # BGTRIMSS3/16
Condition: New
Metal trim or lift channel. Fits on the bottom edge of the backglass on older games that have a 3/16-inch thick backglass.... more
|
|
Bingo Pinball Ball Lift Mechanism - NOS (Bally)
Part # BL_BLY
Condition: New
Ball lift mechanism for many Bally Bingo pinball machines from the 1950s to the 1980s. This is a NOS (new old stock)... more
|
|
Coin Door Skin (Williams)
Part # D-6846-1
Condition: New
Blank metal 3-slot coin door skin with hinge. Used on Williams games from approximately 1965-1982. Part of D-7078 full coin... more
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE)
Part # LOCKDB78
Condition: New
Standard size lock for most games for coin door and backbox. Replacement for popular Fort brand locks. Same look, fit,... more
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike
Part # LOCKDB78A
Condition: New
Standard size lock for most games for coin door and backbox. 7/8-inch length barrel (threaded portion of lock). Comes... more
|
|
Keyless Game Lock - 7/8 Inch (Standard)
Part # LOCKHM78
Condition: New
Keyless lock for most makes/models of games where security is not required. Has turn tab to operate lock instead of keys. Also... more
|
|
Coin Door Price Plate - Red Quarters (Williams)
Part # PDG002
Condition: New
Plastic price tag, or plate for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960s to mid-1980s. Quarters... more
|
|
Coin Door Price Plate - Yellow Dollars (Williams)
Part # PDG003
Condition: New
Plastic price tag- or Plate - for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960s to mid-1980s. Dollars... more
|
|
Coin Door Price Plate - Yellow Dollars (BLEMISH) (Williams)
Part # PDG003B
Condition: New
Blemished part- has a small bend on top left corner, and cut/scrape on lower left corner. Can be cleaned-up to fit and... more
|
|
Bracket 01-12352 - Playfield Support Arm (Bally/Williams) (USED)
Part # U1191
Condition: Used - Excellent
Used metal 90-degree bracket that mounts on right inside wall of main cabinet and holds end of playfield support arm when in... more
|
|
Coin Box Insert Tray 3C-7291 - Dual Slot - White Plastic (Williams) (USED)
Part # U1265
Condition: Used - Good
Used white plastic coin tray for older Williams games that use a metal coin box (most games approx. mid 1960s through early... more
|
|
Lockdown Bar Latch / Lever Assembly (Williams) (USED)
Part # U1289
Condition: Used - Fair/Good
Used lockdown bar latch assembly for older Williams games, approx mid 1960s through early/mid 1980s. Consists of 3 parts:... more
|
|
Pinball Parts
