Action Pinball - 03-16809 - Ball Trough Plastic Shim (Bally/Williams)

Pinball Parts

Action Pinball - Salt Lake City, UT, USA - Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Ball Trough Plastic Shim (Bally/Williams):

Price: $10.09 each
Status: In Stock
(4 Available)

Order:

Part #: 03-16809
Condition: New

For Bally and Williams games approx. 1994 and up (see game listing below).

This plastic shim fits in the metal ball trough at the front of the playfield and helps keep balls from getting stuck in the metal trough.

Problems with wear (divots) and magnetism in the factory metal ball trough are common causes of balls hanging up, not rolling through freely, and games ejecting multiple balls intermittently during play.

For A-16809-2 and 01-11587 ball trough assemblies in all WPC-S and WPC-95 machines (see game listing below).

Easy to install- just slides into the bottom of the trough through the left access hole and holds itself in place- no need to disassemble or remove the trough from the game.

Ask a question about this item

Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Attack From Mars, Cactus Canyon, Champion Pub, Cirqus Voltaire, Corvette, Indianapolis 500, Judge Dredd, NBA Fastbreak, Popeye, Revenge From Mars, Scared Stiff, Shadow, Theatre of Magic, WhoDunnit, World Cup Soccer '94

WILLIAMS: Congo, Dirty Harry, Demolition Man, Flintstones, Indiana Jones, JackBot, Johnny Mnemonic, Junk Yard, Medieval Madness, Monster Bash, No Fear, No Good Gofers, Road Show, Star Trek: The Next Generation, Star Wars: Episode 1, Tales of the Arabian Nights

Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each	Opto Switch Emitter Element (LED) (SEE NOTES) Part # OPTO_EMITTER $0.99 each	Opto Switch Receiver Element (SEE NOTES) Part # OPTO_RECEIVER $1.09 each	Ball Trough Opto Emitter and Receiver PC Board Set (2pcs) - 6-Ball / 7-Opto (Bally/Williams) Part # A-18617-18-SET $29.99 set	Ball Trough Opto Emitter / Receiver Board Set (2pcs) - 6-Ball / 7-Opto (Bally/Williams) Part # A-18244 $97.99 set
Ball Trough Opto Receiver PC Board - 6-Ball / 7-Opto (Bally/Williams) Part # A-16926 $69.99 each	270-ohm Resistor - 2-Watt Part # RES270-2W $0.99 each	Hardware Kit - Ball Trough Opto PCB Mounting (Bally / Williams) Part # HWRKIT4 $15.24 set	Connector Housing - 5-Position IDC - 0.100 Inch Spacing Part # A31095-5 $0.69 each	Decal - High Voltage - Lockdown Bar Latch (Bally / Williams) Part # PDG355 $4.99 each
Flipper Rebuild Kit - Two Flippers - Bally/Williams Games 1992-1999 Part # FLKIT2 $38.64 each	Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams) Part # 20-10110-6 $8.39 each	Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE) Part # RINRFLP $0.89 each	Fuse Kit - Bally / Williams WPC-89 Games (1990-1995) (SEE NOTES) Part # FKWPC $10.49 each	Fuse Kit - Bally / Williams WPC-95 Games (1996-1999) (SEE NOTES) Part # FKWPC95 $13.98 each
Fuse Puller Tool - For Glass Fuses Part # FPT1 $4.99 each	Circuit Breaker Testing Set (6pcs) Part # CBSET $27.49 set	Digital Multi-Meter / Multi-Tester With Leads (Color May Vary) Part # METER02 $12.99 each	Soldering Kit - 30-Watt General Purpose (4 pcs) Part # SI-30-KIT $24.29 set	Heat Shrink Tubing Kit - 120 Pieces Part # HS_KIT $7.99 each
DeoxIT Anti-Oxidant Compound D100L (2cc) Part # D100L $6.99 each	Lamp Assortment Kit (#44,#555,#906,#89) Part # LAMAST $19.67 set	Light Bulb Extractor Tool Part # LAMPTOOL $0.89 each	LED- #44 / #47 3-Element (SEE NOTES) Part # LED3044 $0.99 & up	LED- #555 4-Element (SEE NOTES) Part # LED4555 $1.25 & up
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES) Part # LED044D $1.19 & up	LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES) Part # LED555F $1.29 & up	LED - #89 Flashlamp Part # LED089 $1.59 each	LED - #906 Flashlamp (SEE NOTES) Part # LED906 $1.59 each	Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each
Novus Polish Set - #1 #2 #3 Part # NOV123 $28.17 set	Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz Part # MOTHERS_WAX $14.49 each	Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part # PGDC $29.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike Part # LOCKDB78A $5.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE) Part # LOCKDB78 $9.99 each
Keyless Lock - 7/8 Inch (Standard) Part # LOCKHM78 $5.99 each	Backbox Lock With Key - 5/8 Inch (Short) - Single-Bitted (Black) - NO LOCK TAB (SEE NOTE) Part # LOCKSB58B $5.99 each	Car License Plate Frame - Playing Pinball Part # LICFRAME1 $7.99 each

Back to Home Page

This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.