Action Pinball Logo Pinball Parts
 

Action Pinball - Salt Lake City, UT, USA - Contact Us
Search:    Search Tips...   
Quick Links:
- Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us
- US Shipping Only. International customers can order using a US forwarding service. (more info)


Click to Enlarge
Lamp Driver Decoder IC 4514 (Bally / Stern) (SEE NOTE):

Price: $14.99 each

Status: In Stock
(14 Available)

Order:

 

Part #: 14514
Condition: New
24-pin CMOS latch/decoder IC for lamp driver boards found in many early Bally and Stern electronic solid-state (SS) pinball games. Replaces Bally # E-620-37, and CD4514BE, CD4514BCN, HEF4514BP, MC14514B, MC14514CP, MM14514BCN, NTE4514B, and similar others.

These chips are tested in-shop before shipping to confirm proper operation. Image is sample only- brand may vary depending on current availability.

NOTE for chip socket installation: Lamp driver boards in early Bally and Stern electronic solid-state (SS) games were not designed for chip sockets. The spacing for the chip legs on these boards is slightly wider than the spacing of legs on a chip socket. This was so Bally/Stern could install chips directly on the board, with the chip legs angled slightly outward, as chips come from many manufacturers (chip legs must have no angle inward/outward when installed in chip sockets). See additional images below for example.

To install a socket on one of these boards to accommodate this chip, we recommend either using individual 12-pin SIP sockets for either side of the chip, or cutting the bridging from a 24-pin DIP socket, and installing each side separately, as shown in the additional images below. This chip (14514) will fit in the socket when installed this way.

Additional Images:
Click to Enlarge
   


NOTE: No returns on Electronics - all sales final.

  • Ask a question about this item

    Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
    BALLY: Black Jack, Black Pyramid, BMX, Centaur, Centaur II, Cybernaut, Dolly Parton, Eight Ball, Eight Ball Champ, Eight Ball Deluxe, Elektra, Evel Knievel, Fireball Classic, Fireball II, Flash Gordon, Freedom, Frontier, Future Spa, Goldball, Grand Slam, Harlem Globetrotters, Hotdoggin', KISS, Kings of Steel, Lost World, Mata Hari, Medusa, Mr. & Mrs. Pac-Man, Mystic, Night Rider, Nitro Ground Shaker, Paragon, Playboy, Power Play (Bobby Orr's), Rapid Fire, Rolling Stones, Silverball Mania, Six Million Dollar Man, Skateball, Space Invaders, Speakeasy, Spectrum, Spy Hunter, Star Trek, Strikes and Spares, Supersonic, Vector, Viking, Voltan, X's & O's, Xenon

    STERN: Ali, Big Game, Catacomb, Cheetah, Cosmic Princess, Dracula, Dragonfist, Flight 2000, Freefall, Galaxy, Hot Hand, Iron Maiden, Lazer Lord, Lectronamo, Lightning, Magic, Memory Lane, Meteor, Nine Ball, Nugent, Orbitor 1, Pinball, Quicksilver, Seawitch, Split Second, Star Gazer, Stars, Stingray, Trident, Viper, Wild Fyre
  • One-Rate Shipping in U.S.! Related Items: On Most Parts Orders (click for details)

    24-Pin Wide Chip Socket - DIP (Machined Pin) 1-3/16 x 11/16 Inches (SEE NOTE)
    Part # SOC24PINMW
    $2.59 each

    CA3081 Pre-Driver Transistor Array IC (Bally / Stern)
    Part # 3081
    $9.99 each

    TIP120 Transistor
    Part # TIP120
    $1.99 each

    Capacitor - 0.002uF 1kv Ceramic Disc
    Part # CAP0.002UF1KVDISC
    $0.79 each

    DeoxIT Anti-Oxidant Compound D100L (2cc)
    Part # D100L
    $6.99 each

    Soldering Kit - 30-Watt General Purpose (4 pcs)
    Part # SI-30-KIT
    $24.29 set

    Flipper Assembly - Left (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
    Part # ASE-1587-101-A
    $90.99 each

    Flipper Bat and Shaft - 3-Inch White - Bally Games (Early)
    Part # A-3994-5
    $8.39 each

    Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE)
    Part # RINRFLP
    $0.89 each

    Flipper Rebuild Kit (w/ 3-leaf EOS Switch) - One Flipper LEFT or RIGHT - Bally Games 1975-1980 (SEE NOTES)
    Part # FLKIT7
    $29.66 each

    Flipper EOS Switch Bracket 7/8 x 1-1/4 Inch (Bally)
    Part # P-137-3
    $7.99 each

    Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
    Part # FKBLYSS
    $9.74 each

    Fuse Kit - Stern Electronic Games (1977-1984) (SEE NOTES)
    Part # FKSTNSS
    $9.02 each

    Fuse Puller Tool - For Glass Fuses
    Part # FPT1
    $4.99 each

    Circuit Breaker Testing Set (6pcs)
    Part # CBSET
    $27.49 set

    Digital Multi-Meter / Multi-Tester With Leads
    Part # METER02
    $12.99 each

    Soldering Kit - 30-Watt General Purpose (4 pcs)
    Part # SI-30-KIT
    $24.29 set

    Heat Shrink Tubing Kit - 120 Pieces
    Part # HS_KIT
    $7.99 each

    DeoxIT Anti-Oxidant Compound D100L (2cc)
    Part # D100L
    $6.99 each

    C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
    Part # KITC23CAP
    $10.77 each

    6-Digit LED Score Display (Vintage Bally/Stern)
    Part # PS6D
    $83.99 each

    #44 Lamp (Box of 10)
    Part # LAM044
    $4.59 box

    #47 Lamp (Box of 100)
    Part # LAM047C
    $19.99 box

    Light Bulb Extractor Tool
    Part # LAMPTOOL
    $0.89 each

    LED Conversion Adapter Kit for Bally / Stern Main Lamp Driver Board (SEE NOTES)
    Part # MA-07
    $62.99 set

    LED- #44 / #47 3-Element (SEE NOTES)
    Part # LED3044
    $0.99 & up

    LED- #44 / #47 4-Element (SEE NOTES)
    Part # LED4044
    $1.25 & up

    LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
    Part # LED044D
    $1.19 & up

    LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
    Part # LED044F
    $1.29 & up

    Pin Ball - 1-1/16 Inch Diameter (Standard Size)
    Part # PB116
    $2.99 each

    Novus Polish Set - #1 #2 #3
    Part # NOV123
    $28.17 set

    Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
    Part # MOTHERS_WAX
    $14.49 each

    Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
    Part # PGDC
    $29.99 each

    Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike
    Part # LOCKDB78A
    $5.99 each

    Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE)
    Part # LOCKDB78
    $9.99 each

    Keyless Game Lock - 7/8 Inch (Standard)
    Part # LOCKHM78
    $5.99 each

    Game Lock With Keys - 1-1/8 Inch (Long) - Single-Bitted
    Part # LOCKSB118
    $6.99 each

    Car License Plate Frame - Playing Pinball
    Part # LICFRAME1
    $7.99 each

    Back to Home Page

    Copyright © 2003-2026, Action Pinball & Amusement, LLC, All Rights Reserved.
    This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.