|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Ribbon Cable - 26-pin 19-inch 2-connector:
Price: $12.59 each
Status: In Stock
(2 Available)
Part #: 5795-10938-19
Condition: New
|
|
|
- 2 connectors.
- 26 pins per connector.
- 19 inch length.
- Connectors face same direction when cable laid flat (U-shape).
Used between MPU board J202 and A/V board J602 in late-model Bally and Williams WPC-95 pinball games.
Common to have to replace this cable when connections in the housings become intermittent from oxidation and/or corrosion from exposure to humidity over long periods (such as on games re-imported from overseas that have been exposed to moisture during shipping from sea water mist). Bad ribbon cable connections can cause erratic game operation- symptoms from no-boot, to flippers/sound cutting out, display issues, sporadic unexplained freak outs, and more. If your game has these symptoms, it may need new ribbon cables.
We strongly recommend using DeOxit anti-oxidant/lubricant compound on the pins that this ribbon cable connects to, to help prevent oxidation and add lubrication that reduces stress on circuit boards when connectors are removed/reseated.
NOTE: No returns on Electronics - all sales final.
Ask a question about this item
Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Cactus Canyon, Champion Pub, Cirqus Voltaire, NBA Fastbreak, Scared Stiff
WILLIAMS: Junk Yard, Medieval Madness, Monster Bash, No Good Gofers
|
Pinball Parts
