Action Pinball - A-14691-2 - Standup Target - Round Green

Pinball Parts

Action Pinball - Salt Lake City, UT, USA - Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Standup Target - Round Green - Front Mount:

Price: $11.99 each
Status: In Stock
(8 Available)

Order:

Part #: A-14691-2
Condition: New

Round green standup (stationary) target for late-model Bally and Williams games. Fits some older models and other makes/models as well (see note below).

Target face is 1-inch diameter. Includes mounting bracket and switch diode, as pictured. Front-mount target- mounting bracket is on front of target.

Also replaces #s A-11055, A-17799-2, A-18605-2, B-11696-2, D-11583-2.

Requires two screws for mounting (not included- use our part # HWR02-030606).

Wires must be connected with correct polarity- if installing in a late-model Bally or Williams game, green wire(s) will go to empty solder lug, and white wire(s) will connect to solder lug with diodes anode (non-banded) end.

NOTE: This is a modern Bally/Williams style replacement target. Target may sit slightly lower (about 3/32-inch (2mm)) when installed on older games. If replacing targets on older games, you might consider replacing all targets in the bank at the same time, to retain uniform alignment.

Ask a question about this item

Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
WILLIAMS: Getaway, High Speed, JackBot, more

Standup Target - Round Green - Rear-Mount (SEE NOTES) Part # A-14690-2 $15.57 each	Standup Target - Round Blue - Front-Mount Part # A-14691-1 $11.99 each	Standup Target - Round Red - Front Mount Part # A-14691-4 $11.99 each	Standup Target - Round White - Front Mount Part # A-14691-5 $11.99 each	Standup Target - Round Yellow - Front Mount Part # A-14691-6 $11.99 each
Standup Target - Round Orange - Front Mount Part # A-14691-15 $11.99 each	Target Backing Foam Pad - Gray 3/8 x 3/4 Inch Part # 23-6534-9 $0.30 each	Screw - #6 x 1/2 (10-PACK) Hex Washer Head (HWH) Wood Thread (SMS) Part # HWR02-030606-10PK $1.50 set/10	Red Bullseye Target Decal (Williams) Part # PDG332 $1.00 each	Blue Bullseye Target Decal (Williams) Part # PDG333 $1.00 each
Decal - Blue and Red Bullseye Target w/ Center Hole Part # PDG368 $1.00 each	Round Target Decal - Silver Hologram Part # PDG264 $0.75 each	Round Target Decal - Amber Hologram Part # PDG265 $0.75 each	Decal - High Voltage - Lockdown Bar Latch (Bally / Williams) Part # PDG355 $4.99 each	Flipper Rebuild Kit - Two Flippers - Bally/Williams Games 1992-1999 Part # FLKIT2 $38.64 each
Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams) Part # 20-10110-6 $8.39 each	Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE) Part # RINRFLP $0.89 each	Fuse Kit - Bally / Williams WPC-89 Games (1990-1995) (SEE NOTES) Part # FKWPC $10.49 each	Fuse Puller Tool - For Glass Fuses Part # FPT1 $4.99 each	Circuit Breaker Testing Set (6pcs) Part # CBSET $27.49 set
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary) Part # METER02 $12.99 each	Soldering Kit - 30-Watt General Purpose (4 pcs) Part # SI-30-KIT $24.29 set	Heat Shrink Tubing Kit - 120 Pieces Part # HS_KIT $7.99 each	DeoxIT Anti-Oxidant Compound D100L (2cc) Part # D100L $6.99 each	Lamp Assortment Kit (#44,#555,#906,#89) Part # LAMAST $19.67 set
Light Bulb Extractor Tool Part # LAMPTOOL $0.89 each	LED- #44 / #47 3-Element (SEE NOTES) Part # LED3044 $0.99 & up	LED- #555 4-Element (SEE NOTES) Part # LED4555 $1.25 & up	LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES) Part # LED044D $1.19 & up	LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES) Part # LED555F $1.29 & up
LED - #89 Flashlamp Part # LED089 $1.59 each	LED - #906 Flashlamp (SEE NOTES) Part # LED906 $1.59 each	Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each	Novus Polish Set - #1 #2 #3 Part # NOV123 $28.17 set	Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz Part # MOTHERS_WAX $14.49 each
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part # PGDC $29.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike Part # LOCKDB78A $5.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE) Part # LOCKDB78 $9.99 each	Keyless Lock - 7/8 Inch (Standard) Part # LOCKHM78 $5.99 each	Backbox Lock With Key - 5/8 Inch (Short) - Single-Bitted (Black) - NO LOCK TAB (SEE NOTE) Part # LOCKSB58B $5.99 each
Car License Plate Frame - Playing Pinball Part # LICFRAME1 $7.99 each

Back to Home Page

This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.