Action Pinball - A-18530-6R - Standup Target - Narrow (Oblong) - Yellow

Pinball Parts

Action Pinball - Salt Lake City, UT, USA - Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Standup Target - Narrow (Oblong) - Yellow - Front-Mount Reinforced:

Price: $21.49 each
Status: In Stock
(3 Available)

Order:

Part #: A-18530-6R
Condition: New

Yellow oblong standup / stationary target switch assembly for late-model Bally and Williams games. Also fits some other makes/models as well.

Includes heavy-duty mounting bracket and reinforcement bracket on back of target for added strength. Helps prevents target from bending backward. Ideal for applications where target gets a lot of direct hits, such as Slot Machine target on Twilight Zone, targets on either side of castle entrance on Medieval Madness, etc. Mounting bracket is attached with nuts & screws, so it can be removed and reversed for rear-mounting if required.

Front-mount target with mounting bracket and switch diode, as pictured. Target face measures 1 inch tall.

Requires 2 screws for mounting (not included- order our part # HWR02-030606 sold separately). Wires must be connected with correct polarity- if installing in a late-model Bally or Williams game, green wire(s) will go to empty solder lug, and white wire(s) will connect to solder lug with diodes anode (non-banded) end.

Additional Images:
Click to Enlarge

Ask a question about this item

Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Twilight Zone

WILLIAMS: Medieval Madness

One-Rate Shipping in U.S.!

Standup Target - Narrow (Oblong) - Green - Rear-Mount (SEE NOTES) Part # A-18530-2A $13.57 each	Standup Target - Narrow (Oblong) - Blue - Front-Mount Part # A-18530-1 $9.99 each	Standup Target - Narrow (Oblong) - Green - Front-Mount Part # A-18530-2 $9.99 each	Standup Target - Narrow (Oblong) - Red - Front-Mount Part # A-18530-4 $9.99 each	Standup Target - Narrow (Oblong) - White - Front-Mount Part # A-18530-5 $9.99 each
Standup Target - Narrow (Oblong) - Yellow - Front-Mount Part # A-18530-6 $9.99 each	Standup Target - Narrow (Oblong) - Orange - Front-Mount Part # A-18530-15 $9.99 each	Target Backing Foam Pad - Gray 3/8 x 3/4 Inch Part # 23-6534-9 $0.30 each	Screw - #6 x 1/2 (10-PACK) Hex Washer Head (HWH) Wood Thread (SMS) Part # HWR02-030606-10PK $1.50 set/10	Twilight Zone (Bally) Rubber Ring Kit Part # KIT042 $25.37 each
Medieval Madness (Williams) Rubber Ring Kit Part # KIT026 $19.85 each	Flipper Rebuild Kit - Two Flippers - Bally/Williams Games 1992-1999 Part # FLKIT2 $38.72 each	Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams) Part # 20-10110-6 $8.39 each	Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE) Part # RINRFLP $0.89 each	Fuse Kit - Bally / Williams WPC-89 Games (1990-1995) (SEE NOTES) Part # FKWPC $10.49 each
Fuse Kit - Bally / Williams WPC-95 Games (1996-1999) (SEE NOTES) Part # FKWPC95 $13.98 each	Fuse Puller Tool - For Glass Fuses Part # FPT1 $4.99 each	Circuit Breaker Testing Set (6pcs) Part # CBSET $27.49 set	Digital Multi-Meter / Multi-Tester With Leads Part # METER02 $12.99 each	Soldering Kit - 30-Watt General Purpose (4 pcs) Part # SI-30-KIT $24.29 set
Heat Shrink Tubing Kit - 120 Pieces Part # HS_KIT $7.99 each	DeoxIT Anti-Oxidant Compound D100L (2cc) Part # D100L $6.99 each	Lamp Assortment Kit (#44,#555,#906,#89) Part # LAMAST $20.56 set	Light Bulb Extractor Tool Part # LAMPTOOL $0.89 each	LED- #44 / #47 3-Element (SEE NOTES) Part # LED3044 $0.99 & up
LED- #555 4-Element (SEE NOTES) Part # LED4555 $1.25 & up	LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES) Part # LED044D $1.19 & up	LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES) Part # LED555F $1.29 & up	LED - #89 Flashlamp Part # LED089 $1.59 each	LED - #906 Flashlamp (SEE NOTES) Part # LED906 $1.59 each
Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each	Novus Polish Set - #1 #2 #3 Part # NOV123 $28.17 set	Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz Part # MOTHERS_WAX $14.49 each	Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part # PGDC $29.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike Part # LOCKDB78A $5.99 each
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE) Part # LOCKDB78 $9.99 each	Keyless Game Lock - 7/8 Inch (Standard) Part # LOCKHM78 $5.99 each	Backbox Lock (Late-Model Games) w/ Key - 5/8 Inch (Short) - Single-Bitted (Black) - NO LOCK TAB (SEE NOTE) Part # LOCKSB58B $5.99 each	Car License Plate Frame - Playing Pinball Part # LICFRAME1 $7.99 each

Back to Home Page

This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.