Action Pinball - C-11903-R - Opto Board - 1-Bank Drop Target Assembly

Pinball Parts

Action Pinball - Salt Lake City, UT, USA - Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Opto Board - 1-Bank Drop Target Assembly - Aftermarket Replacement (Williams):

Price: $50.39 each
Status: In Stock
(1 Available)

Order:

Part #: C-11903-R
Condition: New

Aftermarket replacement opto PC board for single drop target assemblies on some mid-1980s and up Williams games (see game listing below).

Includes rubber mounting grommets (2).

Note for Whirlwind and other games using smaller C-13311-R board: The larger C-11903-R board shown here can be installed in place of the smaller C-13311-R board. Requires either soldering the wires directly to the pads on the C-11903-R board, or re-seating them in a new larger 0.156-inch-spacing 6-pin housing that plugs on to header pins on the C-11903-R board.

Image is sample only- actual item may vary slightly in appearance depending on availability.

NOTE: No returns on Electronics - all sales final.

Ask a question about this item

Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
WILLIAMS: Cyclone, Fire!, Millionaire, Police Force, Road Kings, Space Shuttle, Whirlwind, more

One-Rate Shipping in U.S.!

Rubber Grommet (Bally / Williams) (SEE NOTES) Part # 23-6626 $0.99 each	Connector Housing - 6-Position IDC - 0.156 Inch Spacing Part # A31664-6 $1.59 each	Spring - Drop Target and Flipper Return (Bally/Williams) Part # 10-364 $0.49 each	Drop Target Reset Plunger / Armature - Single Drop Target (Bally/Williams) Part # A-11388-2 $10.79 each	Drop Target - Late Bally/Williams - Black - Thin Top Part # 03-8749 $3.99 each
Drop Target - Late Bally/Williams - Black - Thick Top Part # 03-8750 $4.19 each	Whirlwind (Williams) Drop Target Decal Set (4pcs) Part # PDG106 $7.50 set	Soldering Kit - 30-Watt General Purpose (4 pcs) Part # SI-30-KIT $24.29 set	Wire Nut - Small - 16-20ga Part # WIRENUT1 $0.39 each	Space Shuttle (Williams) Rubber Ring Kit Part # KIT241 $25.07 each
Ball Return Assembly (Bally/Williams) Part # B-8039-2 $91.08 each	Coil - FL-11630 (Bally/Williams) Part # FL-11630 $25.19 each	Flipper Rebuild Kit - Two Flippers - Williams Games 1984-1987 Part # FLKIT16 $47.36 each	Flipper Rebuild Kit - Two Flippers - Bally/Williams Games 1988-1991 Part # FLKIT1 $52.24 each	Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams) Part # 20-10110-6 $8.39 each
Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE) Part # RINRFLP $0.89 each	Fuse Kit - Williams Games System 9 and 11 (1985-1990) (SEE NOTES) Part # FKWMSSYS9 $17.80 each	Fuse Puller Tool - For Glass Fuses Part # FPT1 $4.99 each	Circuit Breaker Testing Set (6pcs) Part # CBSET $27.49 set	Digital Multi-Meter / Multi-Tester With Leads Part # METER02 $12.99 each
Heat Shrink Tubing Kit - 120 Pieces Part # HS_KIT $7.99 each	DeoxIT Anti-Oxidant Compound D100L (2cc) Part # D100L $6.99 each	Power Supply Input Connector Repair Kit - Bally / Williams / Data East Part # CN1SET $24.99 set	System 11 MPU (Bally/Williams) Power Startup Capacitor Kit Part # KITSYS11CAP $6.67 set	Score Display Power Supply Rebuild Kit - Bally/Williams (1988-1990) Part # KIT_WMS_HV2 $26.80 each
Lamp Assortment Kit (#44,#555,#906,#89) Part # LAMAST $20.56 set	Light Bulb Extractor Tool Part # LAMPTOOL $0.89 each	LED- #44 / #47 3-Element (SEE NOTES) Part # LED3044 $0.99 & up	LED- #555 4-Element (SEE NOTES) Part # LED4555 $1.25 & up	LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES) Part # LED044D $1.19 & up
LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES) Part # LED555F $1.29 & up	LED - #89 Flashlamp Part # LED089 $1.59 each	LED - #906 Flashlamp (SEE NOTES) Part # LED906 $1.59 each	Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each	Novus Polish Set - #1 #2 #3 Part # NOV123 $28.17 set
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz Part # MOTHERS_WAX $14.49 each	Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part # PGDC $29.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike Part # LOCKDB78A $5.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE) Part # LOCKDB78 $9.99 each	Keyless Game Lock - 7/8 Inch (Standard) Part # LOCKHM78 $5.99 each
Cabinet Leg Protector Set w/ Screws - Metal (4pcs) Part # 535-0599-00 $19.99 set	Car License Plate Frame - Playing Pinball Part # LICFRAME1 $7.99 each

Back to Home Page

This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.