|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Cube Relay - 48vdc DPDT 8 LUG Terminals (EARLY BOARDS) Flipper Enable (K1) (Bally / Stern) (SEE NOTES):
Price: $20.00 each
Status: In Stock
(6 Available)
Part #: RELAY_BLY_K1L
Condition: New
|
|
|
LUG TERMINAL cube-style relay for K1 flipper enable, as found on some early original Bally and Stern solenoid/regulator boards from electronic solid-state (SS) pinball games approx. 1977-1979.
NOTES:
This is a commonly mis-ordered part, so please verify that your board takes this type of relay before ordering, as electronic parts are not returnable!
How to verify if this is the relay you need: Carefully compare the bottom side of your old relay (or the back of the board it's soldered on) to the first additional image below to see if the lug sizes and pattern match.
If so, you are ordering the right part.
If not, you may need part # RELAY_BLY_K1P instead. Further details:- THIS RELAY HAS 8 (EIGHT) LARGE 3/16-INCH (4.8mm) LUG TERMINALS. See additional image below for pin spacing/measurements.
- This relay may be soldered directly to the board, or may plug into a relay socket already on the board.
- This relay is commonly found in EARLY-MODEL GAMES approx. 1977-1979.
- If the board in your game is not original, you may need a different relay. Please use the info above to visually verify.
48vdc relay with double-pole, double-throw contacts (DPDT). Contacts rated for use up to 15 amps at 277vac/220vdc. Measures 13.4mm wide x 26.9mm long x 40.6mm tall.
This aftermarket replacement relay has a small clear window on the side of the cover which lets you easily see the position of the contacts (open or closed), and an indicator in a small window on top of the relay that shows bright orange when contacts are closed (relay activated).
Replaces Bally/Midway part #s E-146-795, E-00146-0795, and 114E-00001-0011.
Additional Images:
Click to Enlarge
NOTE: No returns on Electronics - all sales final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Black Jack, Eight Ball, Evel Knievel, Freedom (electronic), Mata Hari, Night Rider, Power Play (Bobby Orr's), Strikes and Spares, more
STERN: Dracula, Hot Hand, Lectronamo, Magic, Memory Lane, Nugent, Pinball, Stars, Stingray, Trident, Wild Fyre, more
ZACCARIA: Soccer Kings (under-playfield relay)
|
Copyright © 2003-2025, Action Pinball & Amusement, LLC, All Rights Reserved.
This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.
Pinball Parts
