Click to Enlarge
|
Flash Gordon (Bally) Upper Left Playfield Clear Plastic (USED):
Price: $4.00 each
Status: In Stock
(1 Available)
Part #: U1253
Condition: Used - Good
|
|
|
Used playfield plastic for Bally Flash Gordon pinball. Bally part # M-1330-181-12. Mounts behind 3-bank drop targets on upper playfield at top of left ramp. The 3 original metal standoffs that support this piece are missing, but can be replaced by nylon spacers (sold separately).
Used part in good condition. Small stress crack at top standoff mounting hole. Some yellowing of the plastic from age.
NOTE: No warranty or returns on used items. Used items are sold as-is, and all sales are final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Flash Gordon
|
Spacer - Round Nylon - 1/2 H x 5/16 OD x 0.140 ID
|
Part # HWR06-081506
$0.39 each |
|
|
Screw - #6 x 1 Inch (10-PACK) Phillips Pan Head (PPH) Wood Thread (SMS)
|
Part # HWR02-010614-10PK
$2.00 set/10 |
|
|
Flash Gordon (Bally) Upper Right Playfield Clear Plastic (USED)
|
|
|
Flash Gordon (Bally) Playfield Plastics Set (USED) (SEE NOTE)
|
|
|
Cap Nut - White Nylon
|
Part # HWR01-040600
$0.35 each |
|
|
Flash Gordon (Bally) Left Slingshot Plastic (USED)
|
|
|
Flash Gordon (Bally) Right Slingshot Plastic (USED)
|
|
|
Flash Gordon (Bally) Left Lower Drop Target Bank Plastic (USED)
|
|
|
Flash Gordon (Bally) Left Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Left Center Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Ming Plastic (USED)
|
|
|
Flash Gordon (Bally) Right Center Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Right Center Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Bonus Advance Targets Plastic (USED)
|
|
|
Flash Gordon (Bally) Bonus Advance Targets Plastic (USED)
|
|
|
Flash Gordon (Bally) Wood Beast Plastic (USED)
|
|
|
Flash Gordon (Bally) Upper Right Corner Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Rubber Ring Kit
|
Part # KIT099
$16.17 each |
|
|
Flash Gordon (Bally) Game Manual and Schematics (Reprint)
|
Part # PM0155
$27.72 each |
|
|
Bally Games FO-560-3 Service / Repair Manual (Reprint)
|
Part # PM0078
$34.62 each |
|
|
Bally Theory of Operation Manual FO-601-2 (May 1982) (Reprint)
|
Part # PM0080
$18.06 each |
|
|
Flash Gordon (Bally) Score and Instruction Card Set (2pcs)
|
|
|
Flash Gordon (Bally) Strobe Light Parts Replacement Kit (4pcs) (SEE NOTES)
|
Part # KIT_FG_XFT
$27.63 each |
|
|
Orange Star Rollover Housing w/ White Star Button
|
Part # C-900901-O
$2.99 each |
|
|
Flash Gordon (Bally) Drop Target Set w/ Decals (11pcs)
|
Part # A-3944-FG
$55.00 set |
|
|
Flash Gordon (Bally) Spinner Decal Set (4pcs)
|
|
|
Flash Gordon (Bally) Pop Bumper Cap Set (3pcs)
|
Part # A-3713-68-SET
$33.99 set |
|
|
Flash Gordon (Bally) Left Ball Guide - Inline Drop Target Lane (USED)
|
|
|
Pop Bumper Body - Early / Vintage Games (USED)
|
|
|
Yellow Round Standup Target Switch Assembly (Bally) (USED)
|
|
|
Apron Mounting Bracket - Deep / 2-Level Playfields (Bally) (USED)
|
|
|
Varistor Info Card for Cabinet (Bally)
|
|
|
Factory Inspection Card for Cabinet (Bally)
|
|
|
Protector - Ball Shooter Lane (Bally) (SEE NOTE)
|
|
|
Pop Bumper Top Assembly - Older/Vintage Games
|
|
|
Pop Bumper Assembly (Bally SS) w/ AE-26-1200 Coil
|
Part # POP_ASSY2
$57.32 each |
|
|
Pop Bumper Rebuild Kit - Vintage Games - Most Makes/Models
|
Part # KIT_POPRBD2
$20.18 each |
|
|
Flipper Rebuild Kit - Left Side Only - Bally Games 1980-1988
|
Part # FLKIT6-L
$45.58 each |
|
|
Flipper Bat and Shaft - 3-Inch White - Bally Games (Early)
|
Part # A-3994-5
$7.59 each |
|
|
Flipper Cap - 2-Inch - RIGHT w/Blue FLIPPER
|
|
|
Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE)
|
Part # RINRFLP
$0.89 each |
|
|
Flipper Assembly - Linear - Right (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-111-A
$115.69 each |
|
|
Flash Gordon (Bally) Game ROM Chip U2 (2532 EPROM)
|
Part # ROMS117
$18.00 each |
|
|
Alltek Ultimate MPU Game ROM
|
Part # ROMS474
$21.00 each |
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs) (SEE NOTES)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 120 Pieces
|
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
|
Part # KITC23CAP
$10.77 each |
|
|
6-Digit LED Score Display (Vintage Bally/Stern)
|
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$19.99 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED Conversion Adapter Kit for Bally / Stern Main Lamp Driver Board (SEE NOTES)
|
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch (Standard)
|
Part # LOCKHM78
$5.99 each |
|
|
Game Lock With Keys - 1-1/8 Inch (Long) - Single-Bitted
|
Part # LOCKSB118
$6.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|
Pinball Parts
